Hi i was just wondering why i can't connect to ma usb hdd?? any clue?
on that hdd i have first partition ntfs, second after format swap and last one ext3
[admin@(none) root]$ dmesg |grep sda
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
Jan 1 00:00:04 kernel: ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan 1 00:00:04 kernel: hub.c: USB hub found
Jan 1 00:00:04 kernel: hub.c: 4 ports detected
Jan 1 00:00:05 kernel: usb.c: registered new driver usblp
Jan 1 00:00:05 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 00:00:05 kernel: usb.c: registered new driver audio
Jan 1 00:00:05 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 00:00:05 kernel: hub.c: connect-debounce failed, port 2 disabled
Jan 1 00:00:05 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 00:00:05 kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:05 kernel: usb.c: registered new driver usb-storage
Jan 1 00:00:05 kernel: USB Mass Storage support registered.
Jan 1 00:00:05 kernel: hub.c: new USB device 01:03.2-2, assigned address 2
Jan 1 00:00:06 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 00:00:06 kernel: Vendor: USB Model: Storage Rev: 1.04
Jan 1 00:00:06 kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 00:00:06 kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Jan 1 00:00:06 kernel: SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
Jan 1 00:00:06 kernel: Partition check:
Jan 1 00:00:06 kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
Jan 1 00:00:06 kernel: I/O error: dev 08:00, sector 0
Jan 1 00:00:06 kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
Jan 1 00:00:06 kernel: I/O error: dev 08:00, sector 2
Jan 1 00:00:06 kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
Jan 1 00:00:06 kernel: I/O error: dev 08:00, sector 4
Jan 1 00:00:06 kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
Jan 1 00:00:06 kernel: I/O error: dev 08:00, sector 6
Jan 1 00:00:06 kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
Jan 1 00:00:06 kernel: I/O error: dev 08:00, sector 0
Jan 1 00:00:06 kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
Jan 1 00:00:06 kernel: I/O error: dev 08:00, sector 2
Jan 1 00:00:06 kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
Jan 1 00:00:06 kernel: I/O error: dev 08:00, sector 4
Jan 1 00:00:06 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 1 00:00:06 kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
Jan 1 00:00:06 kernel: I/O error: dev 08:00, sector 6
Jan 1 00:00:06 kernel: unable to read partition table
Jan 1 00:00:06 kernel: usb.c: USB disconnect on device 01:03.2-2 address 2
Jan 1 00:00:06 portmap[102]: user rpc not found, reverting to user bin
Jan 1 00:00:06 statd[103]: Version 1.0.7 Starting
Jan 1 00:00:06 statd[103]: statd running as root. chown /var/lib/nfs/sm to choose different user
Jan 1 00:00:06 statd[103]: gethostbyname error for (none)
Jan 1 00:00:07 kernel: vlan1: Setting MAC address to 00 1d 60 46 90 37.
Jan 1 00:00:07 kernel: VLAN (vlan1): Underlying device (eth0) has same MAC, not checking promiscious mode.
Jan 1 00:00:07 udhcpc[112]: udhcpc (v0.9.9-pre) started
Jan 1 00:00:07 dnsmasq[75]: read /etc/hosts - 4 addresses
Jan 1 00:00:07 dnsmasq[75]: reading /tmp/resolv.conf
Jan 1 00:00:07 dhcp client: deconfig: lease is lost
Jan 1 00:00:07 udhcpc[112]: Lease of xxxxxx obtained, lease time 86484
Jan 1 00:00:07 dnsmasq[75]: read /etc/hosts - 4 addresses
Jan 1 00:00:07 dnsmasq[75]: reading /tmp/resolv.conf
Jan 1 00:00:07 dnsmasq[75]: using nameserver 212.76.33.102#53
Jan 1 00:00:07 dnsmasq[75]: using nameserver 212.76.33.104#53
Jan 1 00:00:08 dropbear[129]: Running in background
Jan 1 00:00:08 dhcp client: bound IP : xxxxxxxxxx from xxxxxxxxxxxxx
Jan 1 00:00:17 kernel: Device 08:00 not ready.
Jan 1 00:00:17 kernel: I/O error: dev 08:00, sector 2
Jan 1 00:00:17 kernel: EXT3-fs: unable to read superblock
Jan 1 00:00:17 kernel: MSDOS FS: Using codepage 950
Jan 1 00:00:17 kernel: MSDOS FS: IO charset cp950
Jan 1 00:00:17 kernel: Device 08:00 not ready.
Jan 1 00:00:17 kernel: I/O error: dev 08:00, sector 0
Jan 1 00:00:17 kernel: FAT: unable to read boot sector
Jan 1 00:00:17 kernel: FAT: freeing iocharset=cp950
Jan 1 00:00:17 kernel: Device 08:00 not ready.
Jan 1 00:00:17 kernel: I/O error: dev 08:00, sector 0
Jan 1 00:00:17 kernel: FAT: unable to read boot sector
Jan 1 00:00:17 kernel: Device 08:00 not ready.
Jan 1 00:00:17 kernel: I/O error: dev 08:00, sector 0
Jan 1 00:00:17 kernel: NTFS: Reading super block failed
Jan 11 17:55:29 ntp client: Synchronizing time with time.nist.gov ...
Jan 11 17:59:10 login[150]: root login on `pts/0'
Jan 11 18:00:11 kernel: hub.c: connect-debounce failed, port 2 disabled
Jan 11 18:01:21 kernel: hub.c: connect-debounce failed, port 2 disabled
Jan 11 18:01:45 kernel: hub.c: connect-debounce failed, port 2 disabled
Jan 11 18:02:09 kernel: hub.c: connect-debounce failed, port 2 disabled
