Thanks for the guide wpte. I haven't had a chance to upgrade the firmware yet, hopefully I'll get to that tomorrow. Just a couple of things to point out about the guide.Originally Posted by wpte
I added documentation on how to configure a tunnel due to the amount of problems and questions
http://code.google.com/p/wl500g/wiki...Pv6Tunnelhowto
Obviously things still could go wrong, but this makes things easier
Also added the link in the first post of this thread
The IPv4 server endpoint address is not the same for everyone. In my case it's 216.66.80.30
There are three different /64 used in the connection. in my case:
The Client endpoint - 2001:470:***a:823::2/64 - I believe this should be the WAN Static or local IPv6 address:
The Server endpoint - 2001:470:***a:823::1/64 - I believe this should be the WAN Remote IPv6 gateway:
The Routed /64 for LAN address allocation - 2001:470:***b:823::/64 - I believe this should be the LAN Static IPv6 address:
Reply With Quote
