New Asus RT-N16 Router

[wpte]

FTP: D: 6.2MB/s U:8.2MB/s | D(SSL): 2.8MB/s U(SSL): 3.6MB/s
SAMBA: D: 6.6MB/s D: 6.4MB/s

It could be better...

I got a much higher rate with samba!

up 8.45MB/s
down 6.65MB/s

this is the stable speed (as soon as it doesn't change around) for a 3GB file

I'm using the IPKG one

[wpte]

for the interested, I build the rt-n16 firmware regulary now, so you might download these!
Remember these are still alpha versions

I made a new thread: http://wl500g.info/showthread.php?p=185468
there you can download all the firmwares I've compiled

[theMIROn]

thnx for making it available to endusers
btw, have to say, wpa2 is still unusable in 1.9.2.7-rtn-2000

[wpte]

thnx for making it available to endusers
btw, have to say, wpa2 is still unusable in 1.9.2.7-rtn-2000

not a big deal
Yes, only no encryption or WEP is working! forgot to say that
WPA is not working for me either yet, with TKIP?

[lly]

WPA is not working for me either yet, with TKIP?

WPA+TKIP is prohibited by 802.11n final.

[theMIROn]

WPA+TKIP is prohibited by 802.11n final.

yep
wpa+tkip/aes works fine with 802.11b/g
wpa+aes works fine with 802.11n
wpa2+tkip/aes doesn't work yet

[wpte]

yep
wpa+tkip/aes works fine with 802.11b/g
wpa+aes works fine with 802.11n
wpa2+tkip/aes doesn't work yet

luckily a bit safer to use
wpa+aes it is, hello 300mbit

[hggomes]

Well i flashed to R1200 version and overclock to 532MHz and i could reach higher rates:

FTP: D: 7.2MB/s U:8.9MB/s | D(SSL): 3.2MB/s U(SSL): 3.9MB/s
SAMBA: D: 6.8MB/s D: 8.6MB/s

I got a much higher rate with samba!

this is the stable speed (as soon as it doesn't change around) for a 3GB file

I'm using the IPKG one

[wpte]

Well i flashed to R1200 version and overclock to 532MHz and i could reach higher rates:

FTP: D: 7.2MB/s U:8.9MB/s | D(SSL): 3.2MB/s U(SSL): 3.9MB/s
SAMBA: D: 6.8MB/s D: 8.6MB/s

what settings are you using for overclocking?
last time I tried it underclocked itself

[hggomes]

I'm using 532,266,133.
A BIG THANK YOU to "THE MIRON" and "LLY.DEV" and the "others involved" on this FW, continue the good work

what settings are you using for overclocking?
last time I tried it underclocked itself

[hggomes]

Anyone knows which one is the primary antena? I measured and the left and the right one has de same signal level, the center one its weaker. But the stranger thing is that if i connect to the center or right antena i can connect to AP but the redirected ports dont work VERY WEIRD... Any ideas?

[dg1sek]

Anyone knows which one is the primary antena? I measured and the left and the right one has de same signal level, the center one its weaker. But the stranger thing is that if i connect to the center or right antena i can connect to AP but the redirected ports dont work VERY WEIRD... Any ideas?

What is it that makes you think that one Antenna could be primary? My understanding of MIMO is that you use the signal of all Antennas to eliminate reflection path loss?

[Catalin]

Anyone knows which one is the primary antena? I measured and the left and the right one has de same signal level, the center one its weaker. But the stranger thing is that if i connect to the center or right antena i can connect to AP but the redirected ports dont work VERY WEIRD... Any ideas?

Don't know if it helps, but if you look on the PCB board, the left antenna's connector is marked ANT 0, the right antenna's connector is ANT 1, and the middle one is ANT 2.

[hggomes]

Don't know if it helps, but if you look on the PCB board, the left antenna's connector is marked ANT 0, the right antenna's connector is ANT 1, and the middle one is ANT 2.

Thanks, but i already seen that, that's why i've assume that the left one (ant0) was the primary. But it's very weird the redirected ports not working in ant1 & 2

[dg1sek]

Thanks, but i already seen that, that's why i've assume that the left one (ant0) was the primary. But it's very weird the redirected ports not working in ant1 & 2

Not weird at all. Read how multiple antennaes in MIMO WiFi works ("spatial multiplexing") at
http://en.wikipedia.org/wiki/MIMO#Multi-antenna_types

and
http://en.wikipedia.org/wiki/Antenna_diversity

IMHO it really makes no sense to speak about a "primary" antenna.