I did the above thing, but no mediatomb running?
I run Oleg 1.9.2.7-10 on WL-500gP

free
total used free shared buffers
Mem: 30164 29560 604 0 1428
Swap: 250856 2068 248788
Total: 281020 31628 249392

fdisk -l

Disk /dev/scsi/host0/bus0/target0/lun0/disc: 40.0 GB, 40020664320 bytes
64 heads, 32 sectors/track, 38166 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes

Device Boot Start End Blocks Id System
/dev/scsi/host0/bus0/target0/lun0/part1 1 245 250864 82 Linux swap
/dev/scsi/host0/bus0/target0/lun0/part2 246 978 750592 83 Linux
/dev/scsi/host0/bus0/target0/lun0/part3 979 38166 38080512 83 Linux

I downloaded and copied the config.xml from here.
[admin@WL500GP mediatomb]$ ls
config.xml

Here is the db
[admin@WL500GP root]$ ls .*
.mediatomb .test

[admin@WL500GP /opt]$ ipkg install mediatomb
Installing mediatomb (0.10.0-1) to root...
...
Configuring file
Configuring libexif
Configuring libiconv
Configuring libuclibc++
Configuring mediatomb
Configuring ncurses
Configuring ossp-js
Configuring readline
Configuring sqlite
Configuring zlib
Successfully terminated.

[admin@WL500GP root]$ mediatomb

MediaTomb UPnP Server version 0.10.0 - http://mediatomb.cc/

================================================== =============================
Copyright 2005-2007 Gena Batsyan, Sergey Bostandzhyan, Leonhard Wimmer.
MediaTomb is free software, covered by the GNU General Public License version 2

Aborted
[admin@WL500GP root]$

I don't know what is going on/wrong!