i tried everything ! i doesn`t work
Maybye flupps coul try explain it in german
maybye that would help
It also works when you have connect it to a switch.
Have you computer the same ip range en submask like the yakumo wireless Storage 60 ?
For example give the yakumo wireless Storage 60 a ip 192.168.001.015 + subnetmask 255.255.0.0
Ande your computer ip 192.168.001.014 + subnetmask 255.255.0.0
I have done the same thing to change a WL-WHD to a WL-HDD. It works .
i tried everything ! i doesn`t work
Maybye flupps coul try explain it in german
maybye that would help
What does not work...
The power lamp wil not blinking ?
Firmware Restoration say no yakumo wireless Storage 60 found ?
After flashing its still the same old yakumo wireless Storage 60 ?
Please explain what is not working, or else it is impposible for us to help you.
sorry ... the lamp wont start blinking !
This is how i it do.
1) Shutdown the yakumo wireless Storage 60
2) Unplug the power cable
3) Push the button on, and hold it.
4) Plug the power cable
5) When de light start blinking you can release the button.
I hope this help you.
Thanks Joram for helping ...
Surfingrace, auch in Deutsch fällt mir nichts anderes dazu ein. Was ist denn Dein Endziel? Warum möchtest Du eine neue Software draufhaben?
(Surfingrace, in german I can´t write another thing. Whats your aim? Why do you want to install another software?)
Flupps
it still doesn`work , that damn lamp won`t start blinking . i want to put that oleg fw on it later on
Sorry, in german:
Ich habe auch eine Yakumo und sie zur Asus umgeflasht. Habe folgendes gemacht:
-) Yakumo über Ethernet-Kabel mit Router verbunden
-) Eingeschaltet
-) Alles funktioniert
-) Stromversorgung an der Yakumo abgezogen
-) Die Reset-Taste gedrückt gehalten
-) Stromversorgung eingesteckt
-) Nach mehr als 20 Sekunden (!) fing die gelbe LED an mit blinken
-) Yakumo-Restoration-Tool gestartet
-) Neueste ASUS-Firmware ausgewählt
-) Upload läuft
-) Nachher reboot, alles OK.
Dann klappte es bei jedem umflashen wie hier beschrieben, also nach ca. 5 Sekunden blinkt die LED. War nur beim ersten Mal, dass es so lange dauerte.
Ach ja, Endziel bei mir war, dass ich den Twonky-Server am Laufen haben wollte. Bei der Original-Yakumo-Firmware läßt sich kein Startup-Skript einstellen.
Gruß
Dirk
i start hating that thing ! i pressed the button about 20 sec , then the orange lamp started blinking , i released the button , that thing rebooted and nothing changed . i cnat upload that new firmware
That was a normal RESET. It seems, that you ignore recommended steps as written.
Read the thread again and be sucessful. Otherwise lodge a complain at Yakumo, because the device isn´t upgadable.
Flupps
ok i did exactly what you said . nothing changed .
do you have another possibility?
Originally Posted by flupps
I have two questions:
1) why change IP adress?
2) when the update is done the IP adress must to be change again?
many thanks.
You have not to change the IP adress, you have to set a fix IP adress! After boot process the Yakumo can´t get a adress from server, so it must have an own adress.Originally Posted by 20fifi05
flupps
Non sono riuscito ad installare il firmware Asus su Yakumo wirless storage 60.
Mi potete aiutare, grazie.
Can confirm that it works. Could flash Olegs FW on Yakumo (via flashing it to ASUS).
I could also install ipkg, nano and hdparm (with is essential for me). But saving
/usr/local/sbin to flashfs (so does all the chances are kept after reboot) obviously failed.
I don't get an error message while
flashfs save
flashfs commit
flashfs enable
but after reboot all is lost. Can someone help me with that? Any workaround possible? Please help!
Another issue: Why does the realtime clock doesn't work anymore. It's not a killer feature for me, but nice to have.