[Howto] Install and configure basic OpenVPN server for Oleg firmware

[oldgringo]

I have tested a few more versions and I found that version 5097 is still working correctly with openvpn but 5100 not. Maybe changes in 5099 are the case?

[wpte]

I have tested a few more versions and I found that version 5097 is still working correctly with openvpn but 5100 not. Maybe changes in 5099 are the case?

Could be, although I find the warning messages you get a bit weird.

You should report your findings to lly.
The forum thread: http://wl500g.info/showthread.php?18...rsion&p=260281 (I think lly watches it)

or add an issue to the google code project: https://code.google.com/p/wl500g/issues/entry

I mean, if you're sure it's not working after some revisions about there...

I haven't used openvpn for a long time on my router, so I didn't notice anything.

[oldgringo]

I found a reason of this weird problem - chipset overheating. I've mounted big heatsink with small cooler and everything seems to be OK.
But openvpn in v5099 and newer is still the issue, router is restarting everytime some client connects.

[oldgringo]

When I deactivated fastnat then connection became stable.

[wpte]

When I deactivated fastnat then connection became stable.

Well yes, it should be, otherwise openvpn won't work.

[oldgringo]

But up to version r5097 openvpn works also with fastnat set (no matter of value 1 or 2).

[wpte]

But up to version r5097 openvpn works also with fastnat set (no matter of value 1 or 2).

1 or 2?
you mean 0 = off and 1 = on?

According to lly, the proper way to turn it off is by doing:

nvram unset misc_fastnat_x

0 should turn it off though