alpha rt-n firmware releases

[hggomes]

Did the firewall-rules move somewhere else? I tried to open a port for ssh, but no matter what i write into the post-firewall, i can't get a connection to the router from the internet. A portforwarding to my laptop i set up in the web-if for another service does work, but doesn't show up in the post-firewall like it used to on the wl500w.

kind regards

Benj

iptables -I INPUT -p tcp --dport 22 -j ACCEPT (22 default port, change it if you use other)

iptables -L -n to see the applied rules INPUT chain. (1st chain)

[bef]

iptables -I INPUT -p tcp --dport 22 -j ACCEPT (22 default port, change it if you use other)

iptables -L -n to see the applied rules INPUT chain. (1st chain)

Ok, perhaps i shouldn't mess with the firewall at 2 o'clock in the morning and not look at it again. -.-

A small typo later and it works, thank you

[ofverstedt]

Have anyone noticed a high load avaragae but no cpu activity?
I get this from top:

top - 08:21:10 up 8:45, 0 users, load average: 2.00, 2.02, 2.10
Tasks: 44 total, 1 running, 43 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.7%us, 0.7%sy, 0.0%ni, 98.4%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
Mem: 126204k total, 124124k used, 2080k free, 1448k buffers
Swap: 501912k total, 140k used, 501772k free, 103908k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1258 admin 15 0 1640 636 492 R 1.6 0.5 0:12.71 top
1254 admin 15 0 1232 556 424 S 0.3 0.4 0:01.06 dropbear
2 admin 10 -5 0 0 0 S 0.0 0.0 0:00.00 kthreadd
4 admin 10 -5 0 0 0 S 0.0 0.0 0:00.01 events/0
5 admin 10 -5 0 0 0 S 0.0 0.0 0:00.06 khelper
24 admin 10 -5 0 0 0 S 0.0 0.0 0:01.16 kblockd/0
50 admin 25 0 0 0 0 S 0.0 0.0 0:00.00 pdflush
51 admin 15 0 0 0 0 S 0.0 0.0 0:00.01 pdflush
52 admin 10 -5 0 0 0 S 0.0 0.0 0:00.77 kswapd0
53 admin 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/0
588 admin 20 -5 0 0 0 D 0.0 0.0 0:00.00 pptp-rx-0
589 admin 20 -5 0 0 0 D 0.0 0.0 0:00.00 pptp-tx-0
590 admin 10 -5 0 0 0 S 0.0 0.0 0:01.12 mtdblockd
669 admin 15 0 1616 296 240 S 0.0 0.2 0:00.01 klogd
672 admin 15 0 1008 208 148 S 0.0 0.2 0:00.01 eapd
675 admin 15 0 1192 376 240 S 0.0 0.3 0:00.29 nas
680 admin 15 0 1208 508 384 S 0.0 0.4 0:02.13 httpd
689 admin 10 -5 0 0 0 S 0.0 0.0 0:00.01 khubd
696 nobody 15 0 960 476 336 S 0.0 0.4 0:00.51 dnsmasq
731 admin 25 0 1400 352 280 S 0.0 0.3 0:00.00 rcamdmain
766 admin 11 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0
767 admin 10 -5 0 0 0 S 0.0 0.0 0:00.19 usb-storage
780 admin 11 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1
781 admin 10 -5 0 0 0 S 0.0 0.0 0:05.11 usb-storage
797 admin 15 0 1416 468 372 S 0.0 0.4 0:00.08 watchdog
809 admin 15 0 1176 324 252 S 0.0 0.3 0:00.14 dropbear
816 admin 15 0 1628 356 280 S 0.0 0.3 0:00.02 udhcpc
850 admin 10 -5 0 0 0 S 0.0 0.0 0:00.07 kjournald
851 admin 10 -5 0 0 0 S 0.0 0.0 0:00.02 kjournald
852 admin 11 -5 0 0 0 S 0.0 0.0 0:00.00 kjournald
868 admin 16 0 1616 312 256 S 0.0 0.2 0:00.15 syslogd
876 admin 15 0 11024 2340 1712 S 0.0 1.9 0:00.06 smbd
878 admin 15 0 6548 1632 1060 S 0.0 1.3 0:00.14 nmbd
882 admin 18 0 1052 344 284 S 0.0 0.3 0:00.00 cron
887 admin 21 0 1444 500 416 S 0.0 0.4 0:00.00 xinetd
889 admin 18 0 11024 996 368 S 0.0 0.8 0:00.00 smbd
899 admin 25 10 11124 6632 3512 S 0.0 5.3 0:00.05 transmission-da
900 admin 25 10 11124 6632 3512 S 0.0 5.3 0:00.00 transmission-da
901 admin 25 10 11124 6632 3512 S 0.0 5.3 1:14.09 transmission-da
1253 admin 18 0 11100 3176 2460 S 0.0 2.5 2:21.25 smbd
1 admin 18 0 1400 548 468 S 0.0 0.4 0:00.66 init
1255 admin 15 0 1624 480 412 S 0.0 0.4 0:00.01 sh
3 admin 34 19 0 0 0 S 0.0 0.0 0:00.18 ksoftirqd/0
1266 admin 15 0 1184 340 252 S 0.0 0.3 0:00.02 httpd

Is this normal? I had dd-wrt before oleg and it was a similar problem there. I think it was the upnp who did't work as it should there.

I've got som dead pptp processes what is that?

[lly]

Have anyone noticed a high load avaragae but no cpu activity?

It is a ugly feature of obsolete kernel+Broadcom SDK. Unfortunately, Broadcom ignore anybody who wasn't buy their SDK.
Moreover, even DD-WRT team has some kind of full access this SDK, they can't (or don't want) to fix it.

I've got som dead pptp processes what is that?

It is accel-pptp daemon kernel threads, probably "top" shows incorrect status.

[wpte]

Hey can I compile the upnp deamon in this firmware as well?
or does it need some configuration?

I kinda like my upnp portforwarding back

[lly]

Hey can I compile the upnp deamon in this firmware as well?
or does it need some configuration?

I kinda like my upnp portforwarding back

You tried to ask "how to get upnp works"?

Sorry, didn't test it yet due to other high-priority tasks (stability, WPA2, etc.). I apologize problem occurs because many kernel calls changed in 2.6. So, some code modifications required.

[s1za]

@wpte

Thanks a lot for your reply.

I have a few questions regarding which option should I follow:

1. compile the firmware
In here should I use the GPL_1927.zip sources (as stated in http://code.google.com/p/wl500g/wiki...stomFirmware)?

2. compile only the kernel modules (I think this one is preferable because is easier since I only need to update the firmware with your builds )
How can I compile only the required kernel modules?

Regards,

[wpte]

You tried to ask "how to get upnp works"?

Sorry, didn't test it yet due to other high-priority tasks (stability, WPA2, etc.). I apologize problem occurs because many kernel calls changed in 2.6. So, some code modifications required.

hehe
I understand, upnp is not really the biggest issue in the rt-n development now

It doesn't seem to respond to any packets I'm sending with my own build api
I'm creating the api since microsoft decided to kinda exclude upnp api's in win7
It does seem to work with my wl-500w so far