@adek24
check if transmission is running with ps.
If it is not running start manually. (for testing)
wengi
I install TRANSMISSION from tutorial but I have this error - page is not response..I use reboot but not..
@adek24
check if transmission is running with ps.
If it is not running start manually. (for testing)
wengi
Übersicht aller HowTos --- HowTo Overview (mostly german)
WL-HDD mit diesem Setup. --- WL-HDD with this setup.
Kein Support per PM - Frage im jeweiligen Thread! --- No support via pm - ask in the according thread!
Eine wirklich gute Idee erkennt man daran, dass ihre Verwirklichung von vorne herein ausgeschlossen erscheint. (Albert Einstein)
ok Its working when add:
Code:/opt/bin/transmission-daemon -f -g /usr/local/etc/pmp/transmi ssion/
but I have error:
so when I replace 127.0.0.1 to *.*.*.* or enabled set false it not work.Code:403: Forbidden Unauthorized IP Address. Either disable the IP address whitelist or add your address to it. If you're editing settings.json, see the 'rpc-whitelist' and 'rpc-whitelist-enabled' entries. If you're still using ACLs, use a whitelist instead. See the transmission-daemon manpage for details.
How know how its run ?
And how run automatic Transmission?
Hi,
check your /opt/etc/init.d/S90transmission-daemon.
This will normaly start transmission when all other services start.
Edit your conf to change the whitelist. Double check it!
What ip range do you use in the LAN?
wengi
Übersicht aller HowTos --- HowTo Overview (mostly german)
WL-HDD mit diesem Setup. --- WL-HDD with this setup.
Kein Support per PM - Frage im jeweiligen Thread! --- No support via pm - ask in the according thread!
Eine wirklich gute Idee erkennt man daran, dass ihre Verwirklichung von vorne herein ausgeschlossen erscheint. (Albert Einstein)
ok its works when I execute 2 line:
so how add it to autostart?Code:nice /opt/bin/transmission-daemon -g /tmp/harddisk/transmission/config /opt/etc/init.d/S90transmission-daemon start
when add to vi /opt/etc/init.d/S90transmission-daemon but transmission not start and must manually add 2 line ..
All files in this directory starting with a "S" are started/stoped from rc.unslung on startup/shutdown.
If all other services are working i assume your S90trans... is not executable.
Double check the HowTo.
Übersicht aller HowTos --- HowTo Overview (mostly german)
WL-HDD mit diesem Setup. --- WL-HDD with this setup.
Kein Support per PM - Frage im jeweiligen Thread! --- No support via pm - ask in the according thread!
Eine wirklich gute Idee erkennt man daran, dass ihre Verwirklichung von vorne herein ausgeschlossen erscheint. (Albert Einstein)
i'm need to upgrade my HDD attached to the router from 200 GB to 1TB. Does this mean that i will need to reinstall everything from scratch ? i am asking because all ipkg packages have been installed to the hdd, right ?
can anyone point to me how should i do this upgrade ?
No you don't
Just format the new harddrive just as you want it, don't install ipkg on it, but mount it's partition to /opt
Next you can hook up your old drive and copy the old /opt partition to the new one, just like other files you want to keep.
after that you can do a reboot and it should be all fine
ok seems easy. i'll try that.
Now from some time Midnight Commander is not working properly anymore. The up, down, right, left arrows are writing ABCD letters and not browsing the folders. I even un-installed it and install it again and it has the same behavior. Does anyone know why is doing that ?
use another terminal type or teach mc your current key bindings: options->learn keys
Thanks so much, everthing works super on ASUS WL500W.
I used original SAMBA comming with firmness.I see shared only partition 3.
Question:.how can i share in SAMBA also partition 2?
Thanks.
Hello,
I am running the latest firm ware from google. I am trying to use the script from newbiefan. The autoinstall file will not start. It has the correct permissions 755. When I excuite the command ./autoinstall. The return is not found. I can edit the script and I can see it with ls. Any ideas? Thanks you for your tutorial. If I can get it working it will be great.
Thanks
I am now trying to follow the wengi long install procedure. WL500W. Latest goole firmware. Got to step 5. The wget command fails for install of ipkg.
http://ipkg.nslu2-linux.org/feeds/op...g-opt_0.99.163
Thanks for your help.