As long as it outputs the same voltage (5 V) and more or at least 2.5 A, its a good replacement.
You could try the one that outputs 5V with 2.0 A as long as you don't use any USB devices. Even if 2...
Type: Posts; User: expert_vision
As long as it outputs the same voltage (5 V) and more or at least 2.5 A, its a good replacement.
You could try the one that outputs 5V with 2.0 A as long as you don't use any USB devices. Even if 2...
Yes, sdram_init=0x0013 should enable 16-bit mode (instead of 32) with 10 columns, those disabling the second chip U4 and detect 64MB. In fact that's what I used to enable 64MB ram on my WL-500gP V2...
Here is an explanation of what those commands do.
I myself upgraded wl-500gP V2 to 64 RAM (one chip) and everything was fine.
From what I understand after issuing those commands you will be able...
I don't think an startup script will make any difference since the nvram value is used during early CFE loading, you have to reboot to apply changes .. I think.
The flash chip is repartitioned in...
Where are /usr/local/sbin/post-* files located in rt-n releases ?
Edit:Never mind, I figured it out .. I mean it is the same, I made a typo in #!/bin/sh and was misled by results .. silly.
This will solve only the initial error message, but then installation will fail .. I don't remember exactly where, but after you choose some options and click next installation hangs. Anyway I solved...
I'm not an expert, but I think is because of the RAM .. if there is no RAM, there is no CPU, and if is no CPU there is nothing .. no response. When I first upgraded my RAM, router didn't start .. all...
Nope .. LAN1 is completely dead.I have a dual-boot system (XP-can't remember last time I used it until now :p,win 7) and both give no response on LAN1 (ping,telnet,ssh), but LAN2 works fine. Weird...
Well, my router is not bricked at all. Just when I was ready to prepare for using a JTAG cable I stumbled across this link about serial connector. Gave it a try and noticed that router was working...
Setup:
WL-500gP V2
Firmware:WL500gpv2-1.9.2.7-d-r3328
Behavior:
-when I power the router, LEDs shows activity, power LED goes steady on, wifi LED shows very little activity (usually showed more...
I was trying to avoid opt 1 (linux noob), but opt 2 looks much better :D
Thanks
I want to change /usr/ppp/uni/dial file, but I can't because is protected by OS (WL500gPV2 1.9.2.7-d-r2710).So, how can I modify it ?
I know it is in the how-to, but since I used lighttpd before without epoll, I thought it wasn't mandatory, and apparently that changed in the new version.
And hey .. thanks for still supporting this...
ADOS is not compatible with php-fcgi 5.2.17-1 or the new version has bugs. I had to replace /opt/bin/php-fcgi with the one in this archive mentioned in here, which is version 5.2.6-1. And now it...
No .. it didn't start even with the config file.
Anyway I looked in the error.log and found this
2011-06-11 23:40:14: (log.c.166) server started
2011-06-11 23:40:14:...
I installed lighttpd and whenever I start it, immediately closes without any warnings. If I type lighttpd without any option :
[admin@WL-00221561958C root]$ lighttpd
2011-06-11 22:55:25:...
I have a WL500gPV2 with Oleg Firmware - WL500gpv2-1.9.2.7-d-r2710
I installed MDADM and now I need to load modules md and raid0.
I downloaded modules from here.
But now if I try to load them I...
I hope no one gets upset that I revive a 3 years old thread, but I found this useful.
I installed bash and managed to use arrays, but I need something like a pointer for this code:
for i in...
Did you figure it out ? I have the same problem ...