For those with defective asus router power suplyes, there is a sollution.
Often the capacitors are poorly made and they will start to leak electrolyte until they get defective.
To change the...
Type: Posts; User: Renegate
For those with defective asus router power suplyes, there is a sollution.
Often the capacitors are poorly made and they will start to leak electrolyte until they get defective.
To change the...
Try updating your firmware to WL-500gP 1.9.2.7-d-r473 from this link http://code.google.com/p/wl500g/downloads/list , also try to unmount your flash stik and mount it again.
Good luck!
Best...
I guess there is only one solution for my little friend :( ..... to put him in the trash can :(
Hi everyone,
:(
I need jtag pinout for wl-500gp v1,
The CFE is corrupt or deleted, and the RS232 console does not show anything when connected, and I do not have acces to a Flash programer or AVR....
Change the original R17 resistor (62K Ohm) from the minipciboard with a 62 Ohm resistor, you can find one at the electronic parts store or on an old computer mainboard
Double check your soldering...
try updating your wifi card drivers and disable third party wireless managers, let wireless zero configuration (windows embedded utility) to do the job
Your unit is made in august 2007 (78 stays for August 2007) it has the correct resistor on the minipci card. You do not need the hardware modding
the value is good but to be shure check and post here the first 2 digits from your WL-500GP serial number (it is located on the sticker underneath the device)
click on this link -> http://my.router/Main_AdmStatus_Content.asp
it will apear a secret page from your router's config webpage called System Command
in this window you will have to type the...
There should not be problems the unit can handle the power consumtion of the external HDD ....
I've tested with a 250 GB, 2,5" Laptop HardDrive and it worked ;)
If you are still worryed, buy a...
Some kind of USB equipment would not work correctly until 15 K Ohm resistors on each data pin (D+ , D-) are connected.
Also download and upgrade this firmware...
Yes it works download and update to tis firmware http://oleg.wl500g.info/1.9.2.7-7f/WL550gE-1.9.2.7-7f.zip connect the wires > red for +5V, white for D2-, green for D2+ und black for GND (the port...
update to this firmware http://oleg.wl500g.info/gp.old/WL550gE-1.9.2.7-7f-pre4.trx and ceck the wires (be shure that they are connected right > red for +5V, white for D2-, green for D2+ und black for...
Hi Oleg, Excuse me for posting here but posting on wl-550gE forum does not work for some reasons
Im using your latest firmware for WL -550gE WL550gE-1.9.2.7-7f-pre4 And I had moded the PCB of the...
Click Start -> Run -> cmd then type ipconfig /all then look at the wlan adapter and you should see the HW adress showing something like this aa:bb:cc:ca:cb:bd:)
Hi all I'm a little worryed because the wl-100gD gets verry hot when used in my laptop computer and I'm afraid not to damage my laptop because of the extra heat generated by this PC card. Can...
I will try to connect a cheap memory stick to the +5V, D1-, D2+ and GND and see what happens ;) whish me luck :)
Has anyone tryed to connect a USB port to the WL-550gE router ??
I'm using WL550gE-1.9.2.7-7f-pre4 firmware from Oleg (Thx Oleg) and it suports USB storage.
I would like to know if I can connect a...
Before you can use SSH, you need to generate 'keys'. These are used to encrypt the connection. To do so, telnet to your router. Log in as 'admin' with password 'admin'. Type the following to generate...