udhcpc taking 100% CPU in 1.9.2.7-9

Quote:

---

Originally Posted by Oleg

Ok, try 9.2.2 and 9.2.3. Start with 9.2.3 and if it works, then there is no need to check 9.2.2.

---

Right, version 1.9.2.7-9.2.3 is in at the moment, will evaluate this today to see what happens.

cheers,

Wiz

Release 9.2.3 works OK for now. udhcpc does not take all CPU

Code:

---

[dholliday@mig root]$ uptime
 13:45:03 up 17:20, load average: 0.02, 0.01, 0.00

---

well, not if you use automatic IP. I am half way past the leasetime, so it is time for renewalls.

this is what I see:

http://www.geocities.com/the_wizard_.../snapshot3.png

I'll proceed in putting the 9.2.2 version in to see if that works.

regards,

wiz

1.9.2.7-9.2.3 doesn't work for me either.

Code:

---

Mem: 13696K used, 268K free, 0K shrd, 2088K buff, 5648K cached
CPU:  98% usr  1% sys  0% nice  0% idle  0% io  0% irq  0% softirq
Load average: 1.46 1.19 1.07
  PID  PPID USER    STAT  VSZ %MEM %CPU COMMAND
  176    1 admin    R    2712  19%  98% udhcpc -i eth1 -p /var/run/udhcpc0.pi
 3342  3339 admin    R    1792  13%  1% top

---

Code:

---

[admin@wl500g root]$ uptime
 18:45:36 up 20:49, load average: 1.08, 1.13, 1.06

---

I'll load 9.2.2 now.

9.2.2 does exactly the same here.

So far the only one that worked was 9.2.1.

I'll put that one back in in a minute. So 9.2.2 does clog the cpu when it is renewall time too..

Uploaded 9.2.4, try it too.

Quote:

---

Originally Posted by Oleg

Uploaded 9.2.4, try it too.

---

ok, will put that one in.

cheers,

wiz

9.2.4 works for me!

Code:

---

Apr  5 23:30:39 udhcpc[143]: Lease of myIPaddress obtained, lease time 14400
Apr  6 01:30:42 udhcpc[143]: Lease of myIPaddress obtained, lease time 14400
Apr  6 03:30:44 udhcpc[143]: Lease of myIPaddress obtained, lease time 14400
Apr  6 05:30:47 udhcpc[143]: Lease of myIPaddress obtained, lease time 14400
Apr  6 07:30:49 udhcpc[143]: Lease of myIPaddress obtained, lease time 14400

---

cheers,

Wiz

Wiz is one step ahead of me. I can confirm that 9.2.2 doesn't work for me either. I'll load 9.2.4 now.

Ok, try 9.2.5 now. :)

will do that tomorrow. If that one does not work I don't have time to fix it until I get back from work, so tomorrow afternoon that one will go in.

Will keep you posted Oleg.

cheers,

Wiz

9.2.4 seems to work for me as well. Been running it for 23 hours now without any excessive cpu usage from udhcpc.

I'll load 9.2.5 now anyway. Anything in particular that I should look for?

Just flash it. 9.2.5 seems to be the final in this saga.

Afternoon I'll try 9.2.5, but I don't have problems even with 9.2.3. Anyway, I'll try it and if it'll work I'll keep 9.2.5 or which would be the final version in this super fast problem solving saga. I can't even keep up with all new releases. :o

Thank you very much, Oleg!
Thanks also to others who are testing new releases.
:)

9.2.5 is in at the moment. see what happens over the next couple of hours.