New oleg firmware version

Printable View

Show 40 post(s) from this thread on one page

15-02-2010, 08:38
theMIROn

Quote:

Originally Posted by wpte

The RT-N16 wireless is not quite stable yet I've found out:p
During transfers the speed will slow down over time to mere kb/s and the ping becomes very high during that period (around a second sometimes).
Eventually the wireless will stop responding, and I need to reconnect.

is it repeatable over 802.11n+wap+aes only, or doesn't depends on security settings at all?
15-02-2010, 19:08
ondrejpecta

Quote:

Originally Posted by wpte

The RT-N16 wireless is not quite stable yet I've found out:p
During transfers the speed will slow down over time to mere kb/s and the ping becomes very high during that period (around a second sometimes).
Eventually the wireless will stop responding, and I need to reconnect.

I have to confirm this. I've tried r1193 build for the RT-N16 and I experienced similar behaviour after a couple of minutes of using the wifi (wireless N + WPA2 AES). The wifi led on the router was blinking as if it was a HDD led and the speed dropped down to < 300kBs and connection was unstable.

When I changed the wifi security to open system with 54g limit, the behaviour was the same.
16-02-2010, 14:55
wpte

Quote:

Originally Posted by theMIROn

is it repeatable over 802.11n+wap+aes only, or doesn't depends on security settings at all?

I haven't tried that yet
But I'm going to do now, together with 3 different wlan cards:)
16-02-2010, 15:57
theMIROn

Quote:

Originally Posted by wpte

I haven't tried that yet
But I'm going to do now, together with 3 different wlan cards:)

great, btw, use the r1207 min.
16-02-2010, 19:52
wpte

Quote:

Originally Posted by theMIROn

great, btw, use the r1207 min.

the 1209 is bad?
I also tried the overclocked settings of hggomes, but those made the router highly unstable.
at some point when using samba the router would just simply restart itself without a warning or error code:confused:
is there a watchdog turned on in the firmware?
16-02-2010, 21:07
wpte

I tried some settings out, but it doesn't seem to crash at the moment:confused:

btw, is there any way to force dnsmasq to resolve local dns names by itself? since opendns is doing that right now:o
22-02-2010, 09:59
Lesiuk

I can't use optware buildroot.

http://www.wlan-sat.com/boleo/optwar...s-oleg.tar.bz2
This file is missing.

Do anyone else have that file?
22-02-2010, 12:42
56k

RT-N16-1.9.2.7-rtn-r1232.trx

I manually set up the webconfig for AP only which It was working perfect with WL500W

For RT-N16 just can't get internet connection or communicating with modem after rebooted router checking IP It shown some weird IP number

Sample of Lan IP Setting
Get IP Automatically? no
IP Address: 192.168.1.21
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS Server: 192.168.1.1

Can anyone help please
22-02-2010, 18:00
bef

Is it already possible to install/use programs with ipkg on the rt-n16?

And how about a dedicated subforum for the RT-N series? Imho, it's somewhat combersome to search all the different parts of the forum
22-02-2010, 18:23
wpte

Quote:

Originally Posted by bef

Is it already possible to install/use programs with ipkg on the rt-n16?

And how about a dedicated subforum for the RT-N series? Imho, it's somewhat combersome to search all the different parts of the forum

yes it's possible, every program I tested so far works:)
about 800mb of ipkg so, that's quite a lot:p
23-02-2010, 09:02
56k

Quote:

Originally Posted by 56k

RT-N16-1.9.2.7-rtn-r1232.trx

I manually set up the webconfig for AP only which It was working perfect with WL500W

For RT-N16 just can't get internet connection or communicating with modem after rebooted router checking IP It shown some weird IP number

Sample of Lan IP Setting
Get IP Automatically? no
IP Address: 192.168.1.21
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS Server: 192.168.1.1

Can anyone help please

Assumed RT-N16-1.9.2.7-rtn-r1232.trx not function for AP Mode?
25-02-2010, 10:28
blairfancy

Backward compatibility

Hello all,
Actualy i use latest OLEG firmware, i would like to use new firmware.
My question:

I use a lot of application (http server,torrent amule, scaner,printer) ipkg application is it compatible with new FW?

IPKG feature is allways supported to install application?

what about all my configuration is it requiered to configure all again?

Regards

Blairfancy
25-02-2010, 22:54
wpte

you can keep the ipkg installation without a problem.
Reconfiguring the web interface is a good idea tho, some functions have been added and improved:)
10-03-2010, 12:46
shantanugoel

Hi
wanted to ask if this firmware supports USB modems (3G/CDMA/Evdo etc)?
10-03-2010, 12:56
lly

Quote:

Originally Posted by shantanugoel

wanted to ask if this firmware supports USB modems (3G/CDMA/Evdo etc)?

From the box, using web-UI only - no. By custom shell scripts - yes.

You can take a look to mango mods 3G disapear threads, but nobody decide to help mangodan to improve solution.

Show 40 post(s) from this thread on one page