Opening fdisk
Code:[stefan@Server9 root]$ fdisk
BusyBox v1.1.3 (2007.01.01-14:37+0000) multi-call binary
Usage: fdisk [-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK
Printable View
Opening fdisk
Code:[stefan@Server9 root]$ fdisk
BusyBox v1.1.3 (2007.01.01-14:37+0000) multi-call binary
Usage: fdisk [-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK
You are missing a module!
This one is normaly loaded by default.Quote:
[admin@blechbuechse root]$ lsmod
Module Size Used by
nfsd 93016 1
lockd 64236 1 [nfsd]
sunrpc 83480 1 [nfsd lockd]
usb-storage 62184 0 (unused)
sd_mod 13292 0 (unused)
scsi_mod 70216 1 [usb-storage sd_mod]
printer 12676 0 (unused)
usb-ohci 21940 0 (unused)
usbcore 77264 1 [usb-storage usb-ohci]
ipt_NETMAP 992 0 (unused)
ip_nat_starcraft 2224 0 (unused)
wl 423856 0 (unused)
et 34912 0 (unused)
ide-disk 13524 3
ide-probe-mod 11468 0
ide-mod 109608 3 [ide-disk ide-probe-mod]
Make sure you do not unload it in any startup script!
Otherwise trywengiCode:insmod /lib/modules/2.4.20/usb-storage.o
When I disable FTP usb-storage will dissapear after a restart
I will try an older firmware tomorrow!
Now using 1.9.2.7-7g
Why not using the newest firmware?
wengi
I am now using 1.9.2.7-7f with FTP enabled and it works again.
I will upgrade to 1.9.2.7-7g tonight also with FTP enabled. But you prescribe to dissable FTP, strange that it doesn't work. I'm happy with this option. My mission is to have a NZB Newsgroup download server and Torrent download server with my Asus router
1.9.2.7-7g is the newest one for WL 500g routers, isn't it?
Nope :eek: 1.9.2.7-9
http://oleg.wl500g.info/
wengi
IMPORTANT: This firmware no longer supports original WL-500g/b/bv2/WL-300g/WL-HDD units: hardware vendor no longer support BCM4702 CPU. Use 1.9.2.7-9 instead.Quote:
Originally Posted by wengi
1.9.2.7-9!!! and NOT 1.9.2.7-7gQuote:
Originally Posted by stefantriep
aha ok, i see, i have to learn to read better :P
I thought this how to was the same as in march, but it's up-to-date to the latest firmware.
Very nice Wengi, it's working now! Thanx for the support
First of all: linux-knowledge is probably below average.. i learnt most of it using this tutorial and the freesco router I used to have.. so if my questions are rather stupid.. excuse me :rolleyes:
Because my HD was going crazy at times I decided to install the swap and opt on an USB-stick.. now this one will eventually wear out.. and that is my concern: would there be any way for me to backup the /opt so I could just insert a new USB-stick in the future such that all settings remain the same?
(also: a 2nd question. I did this yesterday.. and since I used this tutorial I now had 3 partitions on my harddisk
1: [previous] swap
2: [previous] opt
3: harddisk
When trying to mount the harddisk to the actual /tmp/harddisk in Fstab I failed. The device just mounted everything to disc0_1 etc. when I ran mount -a it was fine - that is the harddisk (discx_3) was actually mounted on /tmp/harddisk.. however this solution did not sound good to me so I just deleted partitions 1 and 2.. which did the trick.
Is there any way to actually mount that partition using fstab?)
Hi,
backing up /opt is simply copying the files with 'cp'. Maybe you should stop the services running from /opt before. It is not a boot partition, so no need to image it.
swap does not need to be backed up.
Mounting is working fine for me as it is described in the howto.
it mounts to disk0_3 and creates a symbolic link at /tmp/harddisk.
so no prob at all.
wengi
it's still working good!!
Hi!
First Thanx for the great tutorial! I've folowed all your instructions and everything works just fine. But now I have a little problem.
I've installed transmission with ipkg. After reboot I tryed to start transmission with the command transmission_watchdog but no command like that in my distro. I'm using WL500gp V1 oleg 1.9.2.7-9.
I've had problems with 1.9.2.7-10, it won't connect my ISP sometimes for some reason, but this version works just fine for me.
Please help!
Hello Wengi,
what can i do?
All worked perfect, my Transmission was working great!!
Till, for 3 hours ago, i saw my Transmission was not downloading / uploading any torrent.
i was thinking it was possible, but after 15 minutes, still no change!
Before that he was working great for about 1 month, i guess..
Now, i thought, i will reboot the router, so he will start all the stuff again, and it would be working again.
Problem..
When i go to my http://192.168.1.1:8008/cgi-bin/transmission.cgi
He couldn't find the page
Ok, i started putty, and logged in, ( yeah, i am in the root of the router )
i think the problem is, he cannot mount the HDD.
before that i could find my hdd with ( windows network places )
so, i think it is not the HDD
but before i enter this :)
i thought i will check before i press Enter
i
The HDD was turned on. ( i saw the blue led was burning )
I turned off the router, after that i turned off the HDD,
I turned on the HDD. But now, I hear he is going on, but after 20 seconds, i give a flash (<- the led is going on, and off.) And i hear the noise is going away, so he turned off.
Maybe is my HDD the problem, i don't hope so, i have much stuff on it, i would keep...
Maybe you can tell me what's the problem
thanks for the help
__________________________________________________ _______________
================================================== ========
Solve some problems, but...
i solved the problem with the HDD,
the power problem was solved.
i tested it without connecting the usb cable.
and if i do that, the power light is flashing blue, and the hdd goes off.
now i can connect cgi-bin/transmission.cgi
i will see the screen, but he is not uploading or downloading,
when i push a torrent, i will see the next text:
/opt/share/www/cgi-bin/transmission.cgi: kill: 9: (3373) - No such process
i will look if i can find a answer to solve this problem.
if you can tell it my, i will thank you for that.
__________________________________________________ _______________
================================================== ========
Maybe i am a stupid usesr ;P
but offcourse, i have to push pause first, after that push watchdog, and now he is checking files.
Still my question is there, why he was stopping uploading and downloading, but i think now he is working agian.
( it is possible i am stupid, but now i solved it myself, not because i have a great knowledge, but by trying something.)
Hi all,
@Valentin
You should have a look at /opt/sbin.Code:[admin@blechbuechse root]$ find /opt/ | grep -i transmission
/opt/lib/ipkg/info/transmission.conffiles
/opt/lib/ipkg/info/transmission.control
/opt/lib/ipkg/info/transmission.postinst
/opt/lib/ipkg/info/transmission.list
/opt/etc/transmission.conf
/opt/share/man/man1/transmissioncli.1
/opt/share/man/man1/transmission-daemon.1
/opt/share/man/man1/transmission-remote.1
/opt/share/doc/transmission
/opt/share/doc/transmission/NEWS
/opt/share/doc/transmission/README.daemon
/opt/share/www/cgi-bin/transmission2.cgi
/opt/share/www/cgi-bin/transmission.cgi
/opt/share/www/cgi-bin/transmissionorig.cgi
/opt/bin/transmission-daemon
/opt/bin/transmission-remote
/opt/bin/transmissiond
/opt/bin/transmissioncli
/opt/bin/transmissiond-dbg
/opt/sbin/transmission_watchdog
@Arbadelli
so all is fine now?
wengi
I have a very simple question. Is wireless client working properly on the latest fw??
I tried a lot of configs and I didn't manage to get it working.
access point mode.
same ssid and same encryption (wpa2 +aes)
extended mode (ethernet bridge and station)
Does anyone have the correct configuration for this to work?
[QUOTE=wengi;109088]Hi all,
@Valentin
You should have a look at /opt/sbin.Code:[admin@blechbuechse root]$ find /opt/ | grep -i transmission
/opt/lib/ipkg/info/transmission.conffiles
/opt/lib/ipkg/info/transmission.control
/opt/lib/ipkg/info/transmission.postinst
/opt/lib/ipkg/info/transmission.list
/opt/etc/transmission.conf
/opt/share/man/man1/transmissioncli.1
/opt/share/man/man1/transmission-daemon.1
/opt/share/man/man1/transmission-remote.1
/opt/share/doc/transmission
/opt/share/doc/transmission/NEWS
/opt/share/doc/transmission/README.daemon
/opt/share/www/cgi-bin/transmission2.cgi
/opt/share/www/cgi-bin/transmission.cgi
/opt/share/www/cgi-bin/transmissionorig.cgi
/opt/bin/transmission-daemon
/opt/bin/transmission-remote
/opt/bin/transmissiond
/opt/bin/transmissioncli
/opt/bin/transmissiond-dbg
/opt/sbin/transmission_watchdog
Hi Wengi!
I typed in the command you wrote, but my output looks a little different. Did I do something wrong?
THX for your help in advanceCode:/opt/etc/transmission.conf
/opt/lib/ipkg/info/transmission.conffiles
/opt/lib/ipkg/info/transmission.control
/opt/lib/ipkg/info/transmission.list
/opt/bin/transmission-daemon
/opt/bin/transmission-remote
/opt/bin/transmissioncli
/opt/share/man/man1/transmission-daemon.1
/opt/share/man/man1/transmission-remote.1
/opt/share/man/man1/transmissioncli.1
/opt/share/doc/transmission
/opt/share/doc/transmission/COPYING
/opt/share/doc/transmission/ChangeLog
/opt/share/doc/transmission/NEWS
/opt/share/doc/transmission/README
/opt/share/transmission
/opt/share/transmission/web
/opt/share/transmission/web/LICENSE
/opt/share/transmission/web/images
/opt/share/transmission/web/images/buttons
/opt/share/transmission/web/images/buttons/info_activity.png
/opt/share/transmission/web/images/buttons/info_general.png
/opt/share/transmission/web/images/buttons/tab_backgrounds.png
/opt/share/transmission/web/images/buttons/toolbar_buttons.png
/opt/share/transmission/web/images/buttons/torrent_buttons.png
/opt/share/transmission/web/images/favicon.ico
/opt/share/transmission/web/images/graphics
/opt/share/transmission/web/images/graphics/browser_firefox.gif
/opt/share/transmission/web/images/graphics/browser_opera.gif
/opt/share/transmission/web/images/graphics/browser_safari.gif
/opt/share/transmission/web/images/graphics/chrome.png
/opt/share/transmission/web/images/graphics/filter_bar.png
/opt/share/transmission/web/images/graphics/iphone_chrome.png
/opt/share/transmission/web/images/graphics/logo.png
/opt/share/transmission/web/images/graphics/transfer_arrows.png
/opt/share/transmission/web/images/progress
/opt/share/transmission/web/images/progress/progress.png
/opt/share/transmission/web/images/webclip-icon.png
/opt/share/transmission/web/index.html
/opt/share/transmission/web/javascript
/opt/share/transmission/web/javascript/common.js
/opt/share/transmission/web/javascript/dialog.js
/opt/share/transmission/web/javascript/jquery
/opt/share/transmission/web/javascript/jquery/jquery-dimensions.min.js
/opt/share/transmission/web/javascript/jquery/jquery.contextmenu.min.js
/opt/share/transmission/web/javascript/jquery/jquery.form.min.js
/opt/share/transmission/web/javascript/jquery/jquery.min.js
/opt/share/transmission/web/javascript/jquery/jquery.transmenu.min.js
/opt/share/transmission/web/javascript/jquery/json.min.js
/opt/share/transmission/web/javascript/menu.js
/opt/share/transmission/web/javascript/torrent.js
/opt/share/transmission/web/javascript/transmission.js
/opt/share/transmission/web/javascript/transmission.remote.js
/opt/share/transmission/web/stylesheets
/opt/share/transmission/web/stylesheets/common.css
/opt/share/transmission/web/stylesheets/iphone.css
Valentin
Hey Wengi,Quote:
@Arbadelli
so all is fine now?
wengi
not it isn't well now..
i have a strange thing. maybe you can give me the answer!?? ..: i hope :..
the whole evening my torrents are standing
Checking files... 12.68 % Start: 24 Aug 14:17 End: 25 Aug 22:42 uploaded:
also when i push a Queued torrent he will tell me:
Checking files... 0.00 % Start: 25 Aug 23:07 uploaded: 0.0 MB
but, after 1 hour, he will give me the same information.
i cannot push it, because the torrent has to be suspended. So the only thing is to remove the torrent. ( but i won't remove it )
What can i do?
Hope you can give me a answer.
@all.
Have a look at http://wl500g.info/showthread.php?t=15562
Transmission was splitted into two packages.
i am still using an old version and did not upgrade.
Maybe i will do some research to solve your probs. But this will take some days.
The main question: Will we use transmission or transmissiond in future?
The transmission we know until now is called transmissiond in future. (Version 1.22 atm)
The new transmission (Version 1.33 atm) comes with clutch as webinterface
wengi
That makes sense! Thanx for your fast response, I'll try the other version.Quote:
Originally Posted by wengi
Hope It'll work. Allthough I might check the scripts if this version has different commands.
Hello Wengi!
The latest version of Transmission works for me really good, so I think I'll start using it. It is really rich in features, really fast, no big cou resource needed, so I've got only good experience with it! ;);
Thx for your answers again.
Valentin
Quote:
Originally Posted by Valentin
Is there any client that can select files in torrent?:confused:
Hi,Quote:
Originally Posted by kelvinowngyw
i do not understand the question :confused:
wengi
I think what he ment is:Quote:
Originally Posted by wengi
when you are using a client like bitcomet, you can select wich files to download from the torrent.
torrents can describe multiple files (as you probably know), so sometimes you only want to download a small file, and not all the files, wich would take hours:p
that what is want to ask. thanksQuote:
Originally Posted by wpte
sorry for my bad
after an upgrade/update from 1.22 to 1.33 transmission went bad:
"Connection Interrupted
The connection to the server was reset while the page was loading.
The network link was interrupted while negotiating a connection. Please try again."
how I fix this thing?
Hi wengi, when can we expect an update to your how-to using the new transmission package? thanks!
dear wengi,
would you be so kind add your tutorial , installing mediatomb media server ,I've been trying to install from another thread http://www.wl500g.info/showthread.php?t=13963 , but have no luck allways get error " terminate called after throwing an instance of 'zmm::Exception' ".:confused:
thx
sas
@zexe
You should have read at least the last few posts:
http://wl500g.info/showpost.php?p=109189&postcount=379
@terabyte
I will wait until oleo finished the changes.
Until then i will use the transmissiond package in the howtos.
@hdmovie
Sorry, but i will only add things to the howto if i am using them myself.
This is the only way to give a good support.
No media server on my wl-hdd means no media server in the howto.
You will have to use other howtos in this board.
wengi
if i want to turnoff the hdd, is there any step i must do? and when i turn it on again?
how to download from a direct link?
tq
Do a forum search for hdd spindown.Quote:
Originally Posted by mataanjin
with wget. 'wget http://www......'Quote:
Originally Posted by mataanjin
wengi
Hi, I believe this is option is standard available. But, if you use the hdd for swap and/or have cron installed (which accesses the hdd every minute) the hdd doesn't have any 'inactive' time so it won't spin down. Also, from what I read from the forum is that the WiFi WLAN function causes hdd-access so it won't spin down when WLAN is enabled.Quote:
Originally Posted by mataanjin
anyway, the following link should provide information: http://wlhdd.co.uk/wiki/HDD_Standby
code: (for spindown after 10 minutes)
(info taken from thread: http://www.wl500g.info/showthread.ph...highlight=spin)Code:hdparm -S 120 /dev/discs/disc0/disc
HTH
Hi,
I already installed Oleg, before I was using OpenWRT on my Asus wl500gp.
All works fine for me,but I have problem with permissions to /opt dir.
the same or similar when I trying:Quote:
[root@WL-001BFC918B60 root]$ mkdir -p /opt/tmp
mkdir: Cannot create directory `/opt/tmp': Read-only file system
- mkdir -p /opt/tmp
- ipkg.sh install ipkg-opt
- mkdir /opt/tmp
I searched the web with google and I can't find any solution when I'm not using an external usb-hdd. I want to install ipkg, mc, nano, iptraf and maybe 4 apps more - I don't need usb-hdd.... I think ;)
Quote:
[root@WL-001BFC918B60 root]$ mount
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
thanks for your time :)Quote:
[root@WL-001BFC918B60 root]$ df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 2.9M 2.9M 0 100% /
ps
sorry for my gramma (if there are some mistakes;) ), english isn't my native language, but I'm trying :D
when I'm looking for same solution :D
Hi,
no need to browse the web.
Simply rtfm:
;)Quote:
Originally Posted by the fucking manual
Check your /etc/fstab and /usr/local/.files.
wengi
yes yes I know, RTFM :D
I wrote, without usb-hdd, internal flash only ;)
there's no fstab :/
in /usr/local: etc, root, sbin adn no files
In etc dir it's only dropbear dir, root is empty,
[root@WL-001BFC918B60 root]$ ls /usr/local/sbin/
post-boot post-firewall post-mount pre-mount pre-shutdown
all of this files are empty, only in post-boot is dropbear ;)
what version of oleg did you flash?Quote:
Originally Posted by r3ap3rpl
And by the way: No USB HDD/Stick -> No /opt !!!Quote:
Originally Posted by the fucking manual
No woman -> No cry :)
wengi
thanks a lot wengi ;)
I installed ver 1.9.2.7-9 (BCM47XX)
no usb-hdd no /opt, so I can't use ipkg and many other features...:(
It's the way to buy a usb-hdd :D
ok, thx
r3ap3rpl
Cant get cron to auto start at boot been following the guide but too much of a newb with linux please help. Will start it manualy so I can continue for now.
My PS axf results
My unslungCode:[admin@(none) root]$ ps axf
PID TTY STAT TIME COMMAND
1 ? S 0:01 /sbin/init
2 ? S 0:00 [keventd]
3 ? SN 0:00 [ksoftirqd_CPU0]
4 ? S 0:00 [kswapd]
5 ? S 0:00 [bdflush]
6 ? S 0:00 [kupdated]
7 ? S 0:00 [mtdblockd]
47 ? S 0:00 telnetd
48 ? S 0:00 httpd eth1
54 ? S 0:00 syslogd -m 0 -O /tmp/syslog.log -S -l 7
55 ? S 0:00 klogd
56 ? S 0:00 [dnsmasq]
58 ? Ss 0:01 nas /tmp/nas.lan.conf /tmp/nas.lan.pid lan
61 ? S 0:00 [khubd]
70 ? Ss 0:00 lpd
72 ? Ss 0:00 p9100d -f /dev/usb/lp0 0
75 ? Ss 0:00 waveservermain
77 ? Ss 0:00 rcamdmain
81 ? S 0:00 [usb-storage-0]
82 ? S 0:00 [scsi_eh_0]
86 ? Ss 0:00 infosvr br0
87 ? Ss 0:02 watchdog
91 ? Ss 0:00 \_ ntp
100 ? S 0:00 dropbear
107 ? Ss 0:01 \_ dropbear
113 pts/0 Rs 0:00 \_ -sh
129 pts/0 R+ 0:00 \_ ps axf
106 ? S 0:00 udhcpc -i eth1 -p /var/run/udhcpc0.pid -s /tmp/udhcpc
116 ? S 0:00 [kjournald]
117 ? S 0:00 [kjournald]
120 ? S 0:00 stupid-ftpd
127 ? S 0:00 upnp -D -L br0 -W eth1
My Post-boot only had the top 2 lines so I copied the rest from a post on the forum.Code:[admin@(none) root]$ vi /opt/etc/init.d/rc.unslung
# starting them in numerical order and
# stopping them in reverse numerical order
#
if [ $# -ne 1 ]; then
printf "Usage: $0 {start|stop}\n" >&2
exit 1
fi
daemons=`echo $(/usr/bin/dirname $0)/S??*`
[ $1 = "stop" ] && daemons=`echo $daemons | /usr/bin/tr " " "\n" | /usr/bin/sort
for i in $daemons; do
# Ignore dangling symlinks (if any).
[ ! -f "$i" ] && continue
# Write to syslog
logger -t rc.unslung "$1 service $i"
case "$i" in
*.sh)
# Source shell script for speed.
(
- /opt/etc/init.d/rc.unslung 1/34 2%
tarting them in numerical order and
# stopping them in reverse numerical order
#
if [ $# -ne 1 ]; then
printf "Usage: $0 {start|stop}\n" >&2
exit 1
fi
daemons=`echo $(/usr/bin/dirname $0)/S??*`
[ $1 = "stop" ] && daemons=`echo $daemons | /usr/bin/tr " " "\n" | /usr/bin/sort -r`
for i in $daemons; do
# Ignore dangling symlinks (if any).
[ ! -f "$i" ] && continue
# Write to syslog
logger -t rc.unslung "$1 service $i"
case "$i" in
*.sh)
# Source shell script for speed.
(
trap - INT QUIT TSTP
set $1
. $i
)
;;
*)
# No sh extension, so fork subprocess.
$i $1
;;
esac
done
Code:[admin@(none) root]$ vi /usr/local/sbin/post-boot
#!/bin/sh
dropbear
# test if USB disc has been attached
# if not - then insert needed modules
#
# uncoment the following 4 lines if using an USB HDD.
if [ ! -d /dev/discs ]
then
insmod scsi_mod && insmod sd_mod && insmod usb-storage && sleep 5s
fi
#Wait for /opt to mount
mount /dev/discs/disc0/part2 /opt
i=0
while [ $i -le 30 ]
do
if [ -d /opt/etc ]
then
break
fi
sleep 1
i=`expr $i + 1`
- /usr/local/sbin/post-boot 1/27 3%
#!/bin/sh
dropbear
# test if USB disc has been attached
# if not - then insert needed modules
#
# uncoment the following 4 lines if using an USB HDD.
if [ ! -d /dev/discs ]
then
insmod scsi_mod && insmod sd_mod && insmod usb-storage && sleep 5s
fi
#Wait for /opt to mount
mount /dev/discs/disc0/part2 /opt
i=0
while [ $i -le 30 ]
do
if [ -d /opt/etc ]
then
break
fi
sleep 1
i=`expr $i + 1`
done
Your original post-boot with the two lines is ok. Delete the rest again.
This was changed with firmewares -9 and newer.
Can you start cron manually?
Compare the content of /opt/etc/init.d/S10cron with the Howto.
wengi
Im on a wl-500w if that makes a difference. Thanks for your quick reply wengi, cron can be started manually. PS axf confirms itQuote:
Update solved cron problem dont know how but ps axf shows
129 ? Ss 0:00 /opt/sbin/cron
Pre-manual start
Post manual Start this line is added directly after 124Code:[admin@(none) root]$ ps axf
PID TTY STAT TIME COMMAND
1 ? S 0:01 /sbin/init
2 ? S 0:00 [keventd]
3 ? SN 0:00 [ksoftirqd_CPU0]
4 ? S 0:00 [kswapd]
5 ? S 0:00 [bdflush]
6 ? S 0:00 [kupdated]
7 ? S 0:00 [mtdblockd]
47 ? S 0:00 telnetd
48 ? S 0:00 httpd eth1
54 ? S 0:00 syslogd -m 0 -O /tmp/syslog.log -S -l 7
55 ? S 0:00 klogd
56 ? S 0:00 [dnsmasq]
58 ? Ss 0:00 nas /tmp/nas.lan.conf /tmp/nas.lan.pid lan
61 ? S 0:00 [khubd]
70 ? Ss 0:00 lpd
72 ? Ss 0:00 p9100d -f /dev/usb/lp0 0
75 ? Ss 0:00 waveservermain
77 ? Ss 0:00 rcamdmain
81 ? S 0:00 [usb-storage-0]
82 ? S 0:00 [scsi_eh_0]
86 ? Ss 0:00 infosvr br0
87 ? Ss 0:02 watchdog
91 ? Ss 0:00 \_ ntp
100 ? S 0:00 dropbear
120 ? Rs 0:00 \_ dropbear
126 pts/0 Ss 0:00 \_ -sh
131 pts/0 R+ 0:00 \_ ps axf
108 ? S 0:00 udhcpc -i eth1 -p /var/run/udhcpc0.pid -s /tmp/udhcpc
115 ? S 0:00 upnp -D -L br0 -W eth1
121 ? S 0:00 [kjournald]
122 ? S 0:00 [kjournald]
124 ? S 0:00 stupid-ftpd
Quote:
133 ? Ss 0:00 cron
Post boot edited too read
S10cron readsCode:#!/bin/sh
dropbear
Code:#!/bin/sh
#
# Startup script for cron
PIDFILE=/opt/var/run/cron.pid
case $1 in
start)
/opt/sbin/cron
;;
stop)
[ -f ${PIDFILE} ] && kill `cat ${PIDFILE}` ;;
*)
echo "usage: $0 (start|stop)"
exit 1
esac