How do I enable IPv6? I want to use the sixxs.net tunnel and use IPv6 in my local network (IP via DHCP)
So i install this build, no problem here in 1 day.
Upgrade is done via web iface, all services are up and running, plus rtorrent, squid, tor, some rrd scripts too.
Everything look fine, cpu is under 5% with spikes from ntpd every hour.
I cant see any changes, web browsing is good, but was good before -d, i have 8M/1M, and cpu was same before this.
Single thing i see is stable, so anyone can use -d without fear, even for testing.
And no pppd here, nor dhcpd on wan, i have fixed ip .
Last edited by poiu; 09-02-2009 at 19:31.
How do I enable IPv6? I want to use the sixxs.net tunnel and use IPv6 in my local network (IP via DHCP)
IPv6 is disabled by default, since it is useless for most people in home application and flash size is very limited for some router models (520gU, 500gx, 550gE).
You have to recompile firmware from sources with enabled IPv6 in kernel, busybox and other networking packages configs.
Last edited by lly; 12-02-2009 at 11:48.
- http://code.google.com/p/wl500g/wiki...tomFirmware_en
- Change src/linux/linux/.config (see kernel Documentation)
- Change src/gateway/.config
- Change busybox config
We are not test IPv6 functionality at all. Moreover, some packages can't fully support IPv6 itself.
Can You relase one more version of the fw for wl500gpv1 with all included as standard? (IPv6, layer-7).
I hope that it will not be a problem for you.
best regards
Damian Lesiuk
I tried "wl500g-1.9.2.7-d7 (2009-01-24)" on my WL500Gp, works great and stable until now! Good job!
What I really recognized is, thad CIFS access is now really fast against the Koppel-Firmware I used before.
An issue that is still open concerns the sound-interface. The USB audio-adapter I use still only produces a constant beep when playing over esd or by use of madplay. Can this issue ever be fixed on kernel 2.4.x?
Is there any chance to have NTFS or HFS+ write support ?
support for DNS-O-Matic ?
on dns-o-matic they say dd-wrt supports it, so maybe we can rip it from the sources and magicly put it in the oleg sources
http://www.dnsomatic.com/wiki/dd-wrt
but I have this weird feelin that olegs firmware also might be able to do this... since you can specify the server:
I'm sure this must be a value somewhere in olgesDYNDNS Server: updates.dnsomatic.com
I already like the D release, so I can't wait till the full one, keep it up
DD-WRT uses inadyn. Olegs firmware uses ez-ipupdate. Our firmware adds ability to use custom config /etc/ddns.conf (appendable with /usr/local/etc/ddns.conf). If someone confirm that ez-ipupdate works with dns-o-matic, we can add this parameters to predefined list in web-interface.