Hi Engy,
Please read below. I think I found what you need to modify the firmware.
Engy,
Here is the letter from the guy who changed the firmware for the similar CDMA mode.
Please read below. I trunslated it in English.
If you can change the Flash-file system for the Asus, you should put the following file from the attached archive to the folder
/usr/local/custom/
dial
dialup
dialup.chat
update
The file post-boot should be placed /usr/local/sbin/post-boot
More details about this issue at
http://oleg.wl500g.info,
http://www.wl500g.info/showthread.ph...ighlight=mkswa
p).
In the above discribed files you should change the "vendor=0x16D8
product=0x5533" to the ID of your modem, you can find out about the ID at the Widows Device manager.
In UI Adam Firmware you should choose 'dialup', this is the one where you can find login/password/dial number.
Engy here is my Modem ID.
USB\Vid_16d8&Pid_5543&Rev_0000
USB\Vid_16d8&Pid_5543
Engy I am attaching the file on the bottom in russian. Just for your reference. This is the original.
Если Вы умеете менять flash-файловую систему на раутере, то
поместите следующие файлы из приаттаченного архива в папку
/usr/local/custom/
dial
dialup
dialup.chat
update
А файл post-boot поместить /usr/local/sbin/post-boot
(подробнее об этом http://oleg.wl500g.info,
http://www.wl500g.info/showthread.ph...ighlight=mkswa
p).
В вашеперечисленных файлах поменяйте "vendor=0x16D8
product=0x5533" на ID Вашего модема, узнать ID можно в
Windows Device Manager.
В UI прошивки Адама нужно выбрать опцию 'dialup', это та,
где есть только login/password/dial number.
Skier.