- You have to flash firmware by wire, not by WiFi.
- Is web-interface accessible by wire? (If yes, you have mistake in your restrictions).
- You have to flash firmware by wire, not by WiFi.
- Is web-interface accessible by wire? (If yes, you have mistake in your restrictions).
Tnx for your reply.
Everything I've done only by wire,using Asus firmware restauration tool...everything is ok until I'm changing Mac Wireless Filter to permit a mac adress from my laptop to access the wireless network...after that no more acces to the webpage of the router using wired access,not wireless(wireless I've not tryed at all,only wired).Right now I'm downloading the firmware again,and flashing again to see if it happens again.
Cheers
I've tried on 2 asus wl500gP v1 ,also the build from 09 february ,same story,the routers frozen,nothing works,only with hard reset can log in again...with january build,no problem,it works,so something must be changed in latest builds..I don't have enabled any kind of security on wireless,no wep,no wpa,nothing,only MAC filter with permit access for 3 mac adress,1 laptop and 2 Nokia phones.
Tnx again
Last edited by viasat; 24-02-2009 at 16:45. Reason: update
Please try one more time,I've attached an printscreen where the modification is.If I click on Finish,Save&Restart ,it will never restart,no more log in into router,only after hard reset.Believe me,I don't want to waste your time,but the problem it's there,at least for me ,on two different routers...you don't need to have internet conection,just flash the router with your latest build,go on to the option from printscreen,select Accept,add an mac adress,Finish,Save%Restart,and you will see that never restarts,,at least for me...if works for you,it's ok,I give it up,I don't know anymore what else to try,and I'll wait your next releseas...
Tnx again and excuse my bad English!
Cheers
Last edited by viasat; 24-02-2009 at 17:16.
viasat
First of all, You modify wrong page!
On this page you define MAC rules for both wire & wireless clients!
Please, read carefully that written on screen BEFORE modifying anything.
Ok,tnx a lot,my mistake,I'll search better next time!
Cheers and thanck you for your work and help!
Best Regards