Missing:
Timezones at least for (GMT) Portugal
Nice:
Status & Log - DHCP Leases show the manual ip
WARNING: BETA VERSION
TRY AT YOUR OWN RISK!
DO NOT UPGRADE UNLESS YOU KNOW WHAT YOU ARE DOING
DOWNGRADE IS NOT EASILY POSSIBLE!!
Changelog:
important!!Fix 10 problems:
1. P2P networks causing lost of connectivity due to limited number of connections which firewall is keeps tracking (1024 by default)
2. Missing timezones at least for Australia, Azores Islands.
3. Radius authentication does not work.
4. Client mode does not work as expected: could not access internet in client mode.
5. Idle timeout and Tx only does not work with PPPoE.
6. Encryption WPA-PSK AES and WEP, WEP functions like it should but WPA-PSK AES does not function right.
7. WDS using WPA encryption does not function. No connection is established.
8. Bandwidth management page treat rate values as kilobytes, not kilobits.
9. WAN DHCP IP renewal does not work correctly with some ISP configurations, connections get dropped due to reacquiring of IP address.
10. Internal ftp server does not truncate files before overwriting, resulting in corrupted file if newer file is smaller than old one.
find files here:When upgrading from 1.7.x.x based firmware: you MUST Reset your WL500g to defaults via the restore button at the back after upgrading to this firmware!
you do not have to do this when you upgrade from 1.8.x.x based firmware!
but we RECOMMEND you to do a restore to defaults.
Do not import saved settings from older/other firmwares! this can cause unstability to your device
Mirror @ Chupa.nl
http://files.wl500g.info/asus/wl500g...1.9.3.5_EN.zip
Last edited by Antiloop; 25-02-2005 at 08:41.
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO
Missing:
Timezones at least for (GMT) Portugal
Nice:
Status & Log - DHCP Leases show the manual ip
Last edited by int; 01-03-2005 at 16:23.
Home Page
Marco Sousa from PORTUGAL
[ WL-500g - fw: 1.9.2.7-7e [Oleg] | WL-500gP - fw: 1.9.2.7-7f-USB-1.63 [Oleg&koppel.cz] ]
I just installed the firmware 5 hours ago and i didnt noticed some strange things. I will post more results after a few days.
BUG
Reset Issue
I detected the same issue that i have in whole 1.9.X.X fw
Home Page
Marco Sousa from PORTUGAL
[ WL-500g - fw: 1.9.2.7-7e [Oleg] | WL-500gP - fw: 1.9.2.7-7f-USB-1.63 [Oleg&koppel.cz] ]
You dont noticed this?Originally Posted by Stevio
Bug
Sytem Time dont update to NTP Server
Home Page
Marco Sousa from PORTUGAL
[ WL-500g - fw: 1.9.2.7-7e [Oleg] | WL-500gP - fw: 1.9.2.7-7f-USB-1.63 [Oleg&koppel.cz] ]
How typical....bigpond support is broken, does its usual 'Network host unreachable' uslness manual IP specified for Heartbeat server
Well i dont have this message in the system log. Maybe u got this bug from another log tell me. For me it works Now i am trying to get the WDS workingOriginally Posted by int
Feb 26 16:21:07 ntp client: time is synchronized to pool.ntp.org
seems to work ok for me
what I can't get to work and haven't yet is my webcam a trust 150 spacecam portable, i change to the correct driver OV* but as soon as i save it reverts to the other driver
Anybody else has WPA-PSK: TKIP problems with 1.9.2.7 and up, including custom firmware? I know I did (/do). But I didn't seem to have any for close to 12 hours with this firmware (I stopped because of problems ASUS still hasn't solved that custom firmware has).
.7. WDS using WPA encryption does not function. No connection is established
wont work, just as the other firmwares. Someone else tried this firmware and got it working. tell me how u did it
Seems that not all process automatically start after each reboot (like pppoe connection to isp, ntp server, dyndns update or even dhcp-manual assignement...) or are executed with very long delays!
Problems occurs randomly, I think
I also noticed that the asus gateway upnp icon (under win XP) does'nt appear immediately after 1st boot... and when It shows up, it does'nt desapear even when the router is unplugged
So... lot of strange behaviours that I never encounter with previous fw!
Did you reset to defaults properly?Originally Posted by Spot
Everytime I upgrade (or downgrade ), I do a software restore, than I change fw with the restoration tool, than I do a hardware reset and finaly, I unplug my router for more than 10 minits... so I guess I take care enough ...Originally Posted by Styno
But , yesterday, before doing this upgrage, I noticed that trying to change some params in my setup (fw 1.9.2.7 cr3), they didn't stay permanents after reboot!
Do you thing that has something to do with my results?
HelloIdle timeout and Tx only does not work with PPPoE.
can any one say me for what Tx only stand
i think my router 500g dous not terminate the conecting to isp with idle time 300
what must i do
Thanks
Twisterchen
Idle timer only resets on Tx (transmit = from you to your ISP).Originally Posted by Twisterchen
There are other members like you having the same problem. Theoretically the Tx only option should be turned on for you, but it apparently doesn't work with most firmwares.i think my router 500g dous not terminate the conecting to isp with idle time 300
Search this forum for some of our Portugese members as they reported the same problem. http://wl500g.info/showthread.php?t=782