pin10 did the trick ... :cool:
Type: Posts; User: piri
pin10 did the trick ... :cool:
hi,
i experimented with a new dd-wrt version on my wl-500g and after reboot my router did not respond anymore (power led on, radio off, connected lan on) and is not pingable
it's a wl-500g with...
thanks for your reply!
do you have a how-to how-to do that? :-)
hmmm, to tell a mac user that he shall buy a pc ....;)
hey,
is there a chance that a HFS+ formatted hdd is supported by upcoming oleg's firmwares ... i've read somewhere in the forum that it's currently not supported and that hdds shall be formatted...
hmmm, tried both tkip and aes only, but didn't work....
only when unhiding SSID with those settings you can connect, but without a password (i.e. no encryption at all!!!) - seems that the whole wpa...
tried official asus 1.9.2.7. fw and didn't work either.
sorry for blaming you oleg :-/
since the firmware upgrade my wireless connection in ap mode with wpa-psk (tkip+aes) encryption won't come up anymore.
only wep is working correctly....
cheers, thomas.
oleg, you're the greatest, this firmware fixed the dnsmasq/starcraft problem for me :)
loadsa cheers, thomas.
yep thanks, have tried this as well, unfortunately with no effect....
noop, didnt...
I don't know what it is, but as long as I've got starcraft enabled everything is working as should...
on the router
$ nslookup www.chupa.nl 127.0.0.1
Server: localhost.localdomain
Address: 127.0.0.1
Name: www.chupa.nl
Address: 217.67.235.46
no effect with above command...
also iptables output for INPUT and OUTPUT chains does not differ for both options (starcraft enabled/disabled)
the answer might be found in those suspect...
disabled starcraft and issued both commands, but no change...
but lsmod doesnt show these modules anyway....
when enabled though both modules show up, the ip_nat_starcraft module in unused...
i think i found the reason....
found out that only when I disable the Starcraft(Battle.Net) option in the DMZ properties page of the web console, the problem of not resolving DNS entries between...
thanks oleg, i suspected that....
here is my dnsmasq.conf:
user=nobody
interface=br0
dhcp-leasefile=/tmp/dnsmasq.log
dhcp-range=lan,192.168.1.2,192.168.1.254,86400
read-ethers
Oleg, can you please explain what services are responsible for DNS and DHCP for LAN/WLAN that I can take a closer look into.
It's still so that after a router reboot a WAN DNS lookup is not...
Now I got it: DNS requests from WAN to LAN/WLAN are not processed anymore, i.e. www.chupa.nl is pingable on the router, but not on the client machines (hostname not found).
I tried to restart...
First of all thanks a lot guys for all your help!!!
No, to be on the safe side I entered all settings manually...
Only the one from WL-500g, which is enabled by default...
Thanks for your quick replies guys,
In the meantime I tried the following:
- Resetting the router to defaults, rebooting
- Making a "clean" install of 1.8.1.7-3 via recovery tool
- Resetting...
I just found out that it also must have something to do with DNS resolution:
- After rebooting only websites that I surfed before reboot seem to work (must be somewhere in a cache), all others...
hey!
I'm not sure if it's the famous "wan dies" issue but I have the following problem:
- Wl-500g running in Homegateway mode connected to Cable Modem with fixed IP and fixed DNS
- Running the...
Tested: WORKING
Model: WL-500g
Firmware: 1.7.5.9-4 [oleg]
Parallel Port: YES (working with RAW on 9100)
URL To manufacturer: http://www.canon.com
URL To product:...
Hey,
(1) A good place to start and to download the rootfs is oleg's step by step howto on http://wl500g.dyndns.org
(2) As an example I have my 256MB usb stick partitioned into
- a 230MB fat...
1: yes
2: yes
3: yes
Not getting connection.
I have the same problem like you.
I's not working even when assigning static 192.168.2.x IP's to the wireless MAC.
It's only working with...
antiloop,
when we use this firmware, can we use it together with the USB root fs for 1.7.5.6-CR2?
i'm quite confused what comes from the firmware and what from the external USB source....at...
Technik and erik_bies (and oleg of course ;) )
thanks guys, knoppix with qtparted did the job! now running with oleg's 1.7.5.6-CR2 on the cruzer :)
you do a great job out there m8s,
cheers,...