Oleg's firmware 1.9.2.7-7f, WLHDD static IP, no DNS resolv

[wengi]

ok. Here we go.
Try to edit /etc/resolv.conf. (symlink, but anyway.)

add a line:
nameserver IP.OF.YOUR.ROUTER

save. Do NOT reboot.

try nslookup google.com.
Does this work?

wengi

[Martin1802]

Hi Wengi,

Thanks ... I searched around with some other keywords ... found the solution (I think and it works) ... inside the russian part of the forum ...

Found here in russian forum

That's what I able to understand in the russian post :-) ... replace nameserver IP with yours ...

NAMESERVER error in olegs firmware for static IP

echo "nameserver 192.168.0.254" >>/usr/local/etc/resolv.conf; flashfs save; flashfs commit; flashfs enable

echo "cp /usr/local/etc/resolv.conf /tmp/; killall -sighup dnsmasq" >>/usr/local/sbin/post-boot

Hope Oleg will read this post, so he will be able to correct the problem in next version :-)

Now my next project will be (maybe) ... there are some posts "RAM upgrade" ... and connect a small lcd display and some keys to wlhdd ...

THX
Martin

[wengi]

Now my next project will be (maybe) ... there are some posts "RAM upgrade" ... and connect a small lcd display and some keys to wlhdd ...

That would be .......

[DJans]

try nslookup google.com.
Does this work?
wengi

I have the same problem. When using Static IP dns does not work. I tried the steps described here but without success. Any ideas?

[wengi]

I have the same problem. When using Static IP dns does not work. I tried the steps described here but without success. Any ideas?

Post content of your resolf.conf and post-boot.

wengi

[DJans]

I have solved it. I forgot the flashfs save/commit/enable stuff so the new file was not saved into the flash.