[HowTo] Sane Scanner-Server with XSane Frontend

[Bogie67]

madi123,

Hi!

I done the first step - editing of ipkg.conf. It is located at folder /opt/etc/

Now I am figuring out how can I transfer the sane-backends-1.0.23 from sda3(partition 3) or from my pc going to opt/etc(partition 2). I have a 500 gb hdd being partitioned to swap, opt & sda3.

Is the command? Ipkg -d /opt/etc install /sda3/sane-backends-1.0.23

[madi123]

madi123,

Hi!

I done the first step - editing of ipkg.conf. It is located at folder /opt/etc/

Now I am figuring out how can I transfer the sane-backends-1.0.23 from sda3(partition 3) or from my pc going to opt/etc(partition 2). I have a 500 gb hdd being partitioned to swap, opt & sda3.

Is the command? Ipkg -d /opt/etc install /sda3/sane-backends-1.0.23

So, you are almost there.

First "ipkg remove sane-backends" then "cd /sda3" if it is a a folder were *.ipk file is located. Then "ipkg install sane sane-backends_git20121025-1_mipsel.ipk".

I don't think you need to specify -d option since it will be installed in default location anyway. I hope you followed all instructions from the first post before removing the old backends and installing new ones.