не стоит перевирать цитаты. Там высказана чистая гипотеза.В новом Asus RT-N26 скоро будет работать Dual Band - 2.4/5 Ghz
+1 Правда, в Asus RT-N16 он работает только на 2.4 Ghz (2TX/2RX MIMO) ...
2.4 Ghz Power Amp SE2528L : http://www.sige.com/uploads/briefs/D...ep-10-2008.pdf
В новом Asus RT-N26 скоро будет работать Dual Band - 2.4/5 Ghz ?
На BCM4322 ? http://forums.whirlpool.net.au/forum...5305#r20595305
http://www.broadcom.com/products/Wir...b=features-tabBCM4718 - Intensi-fi® XLR 802.11n Simultaneous Dual-Band (2.4/5 GHz) Router System-on-Chip
The BCM4718 integrates a 533MHz CPU architecture with a high performance memory architecture to push
the limits of simultaneous dual-band performance for high-end Gigabit Ethernet routers, and features USB
host ports to support media storage routers. Simultaneous dual-band routers enable consumers to
dedicate the 5 GHz portion of their wireless network for video streaming and VoIP calls, while using the
2.4 GHz band for typical data applications. Intensi-fi technology offer greater 5 GHz channel options with
regulatory certification for dynamic frequency selection (DFS). Intensi-fi XLR technology offers greater
channel options on which to transmit video, voice and data.
The BCM4718 processor is the highest performing System-on-a-Chip (SoC) in the Intensi-fi XLR processor family.
It combines a Draft 802.11n CPU/MAC/baseband/radio router solution with a powerful 533 MHz MIPS32® 74KTM
core and an enhanced CPU memory subsystem to increase system performance. It also features Accelerange™
technology to ensure robust wireless signals over a larger coverage area, which is critical for video streaming
and other low-latency applications.
Features * Product Info Product Brief BCM4716/BCM4717/BCM4718
- High-performance System-on-a-Chip processor
- Draft IEEE 802.11n-compliant CPU/MAC/baseband/radio wireless router solution
- Simultaneous dual-band operation provides data rates of up to 300 Mbps in both the 2.4 GHz and 5 GHz bands
- Integrated 533-MHz MIPS32 74K core with 32-KB I-cache, 32-KB D-cache and 64-entry translation lookaside buffer (TLB)
- Worldwide DFS certification to provide 27 channels in the 5 GHz band
Олег уже разгонял до 532 Mhz : http://wl500g.info/showpost.php?p=132818&postcount=90
Code:CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Thu Dec 4 16:48:54 CST 2008 (root@localhost.localdomain) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 262144(0x40000) et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.3 CPU type 0x19740: 532MHz Tot mem: 131072 KBytes CFE mem: 0x80700000 - 0x8079AE30 (634416) Data: 0x80731670 - 0x807343A0 (11568) BSS: 0x807343A0 - 0x80734E30 (2704) Heap: 0x80734E30 - 0x80798E30 (409600) Stack: 0x80798E30 - 0x8079AE30 (8192) Text: 0x80700000 - 0x80731670 (202352) Device eth0: hwaddr 00-90-4C-08-00-2D, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set Null Rescue Flag. Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .... 1585152 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 CPU ProcId is: 0x00019740, options: 0x000021cd Primary instruction cache 32kb, linesize 32 bytes (4 ways) Primary data cache 32kb, linesize 32 bytes (4 ways) Linux version 2.4.20 (root@localhost.localdomain) (gcc version 3.2.3 with Broadcom modifications) #18 Thu Dec 4 11:19:32 CST 2008 Determined physical RAM map: memory: 07fff000 @ 00000000 (usable) On node 0 totalpages: 32767 zone(0): 32767 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM4716 rev 1 at 532 MHz Calibrating delay loop... 265.42 BogoMIPS Memory: 127872k/131068k available (1352k kernel code, 3196k reserved, 112k data, 64k init, 0k highmem) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Using membase 8000000 PCI: Initializing host PCI: Reset RC PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Fixing up bridge PCI: Enabling device 01:00.1 (0004 -> 0006) PCI: Fixing up bus 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 8) is a 16550A PPP generic driver version 2.4.2 Amd/Fujitsu Extended Query Table v1.3 at 0x0040 number of CFI chips: 1 Flash device: 0x2000000 at 0x1c000000 Physically mapped flash: cramfs filesystem found at block 918 Creating 4 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "boot" 0x00040000-0x01fe0000 : "linux" 0x000e5a94-0x01fe0000 : "rootfs" 0x01fe0000-0x02000000 : "nvram" Found a 0MB serial flash sflash: found no supported devices NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (1023 buckets, 8184 max) - 344 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_time loading NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 64k freed Using /lib/modules/2.4.20/kernel/drivers/net/emf/emf.o Using /lib/modules/2.4.20/kernel/drivers/net/igs/igs.o Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o Using /lib/modules/2.4.20/kernel/drivers/net/bcm57xx/bcm57xx.o insmod: init_module: bcm57xx: No such device Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o Hit enter to continue... BusyBox v0.60.0 (2008.11.17-08:51+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. # # cat /proc/cpuinfo system type : Broadcom BCM4716 chip rev 1 processor : 0 cpu model : V4.0 BogoMIPS : 265.42 wait instruction : no microsecond timers : yes tlb_entries : 64 extra interrupt vector : no hardware watchpoint : yes VCED exceptions : not available VCEI exceptions : not available unaligned_instructions : 0 System clocks (cpu/mem/si/xtal) : 532/266/133/20 Mhz. dcache hits : 2147483648 dcache misses : 3750653946 icache hits : 2147483648 icache misses : 1840993899 instructions : 2147483648 # wl revinfo vendorid 0x14e4 deviceid 0x4329 radiorev 0x72056000 chipnum 0x4716 chiprev 0x1 corerev 0x11 boardid 0x4cf boardvendor 0x14e4 boardrev P221 driverrev 0x50a3803 ucoderev 0x1fc0066 bus 0x0 phytype 0x4 phyrev 0x5 anarev 0x8 # wl status SSID: "Broadcom" Mode: Managed RSSI: 0 dBm noise: 0 dBm Channel: 11 BSSID: 00:90:4C:09:00:2D Capability: ESS ShortSlot Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ] 802.11N Capable: Chanspec: 2.4GHz channel 11 20MHz (0x2b0b) Control channel: 11 802.11N Capabilities: Supported MCS : [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] # wl cap ap led wme pio 802.11d 802.11h rm cqa mbss16 afterburner ampdu amsdurx amsdutx
Эти фотки взяты отсюда :
http://wl500g.info/showthread.php?t=19629
https://fjallfoss.fcc.gov/prod/oet/f...ive_or_pdf=pdf
Last edited by Omega; 14-11-2009 at 02:40. Reason: добавил ссылки и фото
• Oleg's FAQ • Mini FAQ • Все об Asus RT-N16 • Все об Asus RT-N66U • VectorMM.net • Wiki-HUB.ru • WikiDevi • Wi-Cat.ru •
не стоит перевирать цитаты. Там высказана чистая гипотеза.В новом Asus RT-N26 скоро будет работать Dual Band - 2.4/5 Ghz
Любопытно было бы сделать хардмод для поддержки 5GHz.
Ибо если чип поидее поддерживает то огрпничение или в софте или (скорее всего) в выскочастотной части.
Приобрел этот роутер. Подключил и уже возникли проблемы, настройки почему-то не сохраняются, веб-интерфейс жутко глючит, кнопки в нем (применить, перезагрузка и т.д.) не вызывают вообще никакой реакции
Last edited by Wachovski; 29-10-2009 at 23:02.
Собственно проблема была в касперском - он полностью блокировал любые действия в веб-интерфейсе, судя по всему нужно добавить адрес 192.168.1.1 в его список исключений
Однако возникла другая проблема после прошивки на версию 9.3.3.7 и его перезагрузки через тот же веб-интерфейс - роутер судя по всему перестал отвечать. Постоянно мигает лампочка питания... (не быстро, а примерно с секундным интервалом)
Last edited by Wachovski; 30-10-2009 at 08:58.
Попробовал через Firmware Restoration, но программа не обнаружила роутера в режиме восстановления.
• Oleg's FAQ • Mini FAQ • Все об Asus RT-N16 • Все об Asus RT-N66U • VectorMM.net • Wiki-HUB.ru • WikiDevi • Wi-Cat.ru •
Касперского перед этим естественно отключил
А эта утилита работает по кабелю, или только через Wi-Fi?
Last edited by Wachovski; 30-10-2009 at 10:04.
я так предполагаю что ТОЛЬКО по КАБЕЛЮ
Странно, я и пробую по кабелю, с отключенным касперским, ресторатор не видит роутер и все тут ((