Palantir - Streaming Video on WL-500g

[WlanMan]

Hi Folks

Audio input with the Philips Vesta Pro is realy working, it was as simple as raising volume up from zero .
Sadly, GSM coding is too much for 80 Mips, i got a 3sec audio slice every 10 seconds or so. Try it out, im very interrested if it works on other users too.

This is Smixer 1.0.4
I deleted all but the Mic setting in the conf, you can add others in the same manner if your sound devices supports them (Like output on a speaker) just use the name shown with the -p switch instead of mic. Range is from 0 to 100.

Decompress with "tar -xvzf smixer-mipsel.tgz" on the USB Disk or in /tmp, and run it with "./smixer -f smixer.conf".
Current settings can be printed with "./smixer -p".

Got the latest firmware, and yes, I have a sound device. But I do get it even without plugging a camera. So I guess it is not related. I don't get any new devices after plugging it.

Hi, i think now i understand you (long time, heh If you mean the files under /dev, this is normal thy get created at boot time. You have to look into dmesg output to see if your cam´s microphone is recognised.

Greets