Ok other good ideas?Originally Posted by Rick
Thx for replying so quickly but unfortunatly it did not help....................
I have read some where that u can press the copy button to select a diffrent start up script but i did not get lucky to do this.......
But when i instal firmware 2.0.0.7 i am able to telnet to the router.
but when i go back to kfurge 1.0.7.8 i still have the same problem.
any other good ideas ?
Groeten
With Kfurge 1.0.7.8 (the latest) you have to wait for about 3 minutes after booting the Asus before the ready lights starts to blink. It will shine all the time before that moment. When it blinks, press the copy button and hold it until the ready light stops blinking.
Then the default rc.local will be executed, your /shares/MYVOLUME1/opt will not be placed over /opt, and well, this should lead to a state that telnet is possible.
Second idea: if you can telnet with firmware 2.0.0.7 (this is an extremely dangerous firmware, and if I were you, I would remove the WAN-cable before installing 2.0.0.7), you should be able to do something about /shares/MYVOLUME1/opt/etc/rc.local. Maybe rename it or so (mv rc.local rc.vocal)
Good luck
en de groeten terug
Marc
Reply With Quote
