asterisk14-gui problems

[chi]

I recently installed asterisk14 from the optware repository. Works better for me the the 1.2 version.

I played around with the asterisk-gui on x86, and didn't have any problems installing and / or running it.

On the WL500 however, the gui seems to work only partialy, meaning I can access the non-static content (/httpstatus, /manager) but no luck trying to load the sample gui, which is located in the static part of the web-interface.

I tried to find anything solid on this subject on asterisk and optware pages, but again no luck... As I would hesitate to use this gui to configure company's PBX/IVR it would be a nice addition to a home VoIP / Answering machine...

Perhaps sb here already tried to run this GUI and succeeded ?

[ptabashov]

Hi!

Can you please detail the steps how you installed asterisk14? I tried installing it with ipkg and it did install, although wouldnt seem to start:

[admin@(none) sbin]$ /opt/sbin/asterisk -vv
-sh: /opt/sbin/asterisk: not found


Thanks

[thejew]

Having the exact same issues as the first user described.
i folowed this guide to activate the webgui
http://www.ip-phone-forum.de/showthread.php?t=122920


but i am not able to access "http://routerip:8088/asterisk/static/config/cfgadvanced.html" it gives me a "Nothing to see here. Move along." from the Asterisk Webserver. So basicly its on but I cant acces it, kinda weired.
Using a wl-500gp and asterisk14 + 14gui.
Hopey anyone can help me...

[sonice]

I have installed it and when I run it I am having such errors:

$ /opt/sbin/asterisk -vv
Asterisk 1.2.24, Copyright (C) 1999 - 2007 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'show license' for details.
=========================================================================
Errors detected in logger.conf: see above; default settings will be used.
Asterisk Event Logger Started /opt/var/log/asterisk/event_log
Asterisk Dynamic Loader loading preload modules:
  == Manager registered action Ping
  == Manager registered action Events
  == Manager registered action Logoff
  == Manager registered action Hangup
  == Manager registered action Status
  == Manager registered action Setvar
  == Manager registered action Getvar
  == Manager registered action Redirect
  == Manager registered action Originate
  == Manager registered action Command
  == Manager registered action ExtensionState
  == Manager registered action AbsoluteTimeout
  == Manager registered action MailboxStatus
  == Manager registered action MailboxCount
  == Manager registered action ListCommands
Feb 14 12:53:04 NOTICE[13951]: manager.c:1686 init_manager: Unable to open management configuration manager.conf.  Call management disabled.
Feb 14 12:53:04 NOTICE[13951]: cdr.c:1214 do_reload: CDR simple logging enabled.
  == RTP Allocating from port range 5000 -> 31000
Asterisk PBX Core Initializing
Registering builtin applications:
 [AbsoluteTimeout]
  == Registered application 'AbsoluteTimeout'
 [Answer]
  == Registered application 'Answer'
 [BackGround]
  == Registered application 'BackGround'
 [Busy]
  == Registered application 'Busy'
 [Congestion]
  == Registered application 'Congestion'
 [DigitTimeout]
  == Registered application 'DigitTimeout'
 [Goto]
  == Registered application 'Goto'
 [GotoIf]
  == Registered application 'GotoIf'
 [GotoIfTime]
  == Registered application 'GotoIfTime'
 [ExecIfTime]
  == Registered application 'ExecIfTime'
 [Hangup]
  == Registered application 'Hangup'
 [NoOp]
  == Registered application 'NoOp'
 [Progress]
  == Registered application 'Progress'
 [ResetCDR]
  == Registered application 'ResetCDR'
 [ResponseTimeout]
  == Registered application 'ResponseTimeout'
 [Ringing]
  == Registered application 'Ringing'
 [SayNumber]
  == Registered application 'SayNumber'
 [SayDigits]
  == Registered application 'SayDigits'
 [SayAlpha]
  == Registered application 'SayAlpha'
 [SayPhonetic]
  == Registered application 'SayPhonetic'
 [SetAccount]
  == Registered application 'SetAccount'
 [SetAMAFlags]
  == Registered application 'SetAMAFlags'
 [SetGlobalVar]
  == Registered application 'SetGlobalVar'
 [SetLanguage]
  == Registered application 'SetLanguage'
 [Set]
  == Registered application 'Set'
 [SetVar]
  == Registered application 'SetVar'
 [ImportVar]
  == Registered application 'ImportVar'
 [Wait]
  == Registered application 'Wait'
 [WaitExten]
  == Registered application 'WaitExten'
  == Manager registered action DBGet
  == Manager registered action DBPut
Asterisk Dynamic Loader Starting:
Feb 14 12:53:04 WARNING[13951]: loader.c:565 load_modules: Unable to open modules directory /opt/usr/lib/asterisk/modules.
Feb 14 12:53:04 WARNING[13951]: loader.c:565 load_modules: Unable to open modules directory /opt/usr/lib/asterisk/modules.
Feb 14 12:53:04 WARNING[13951]: loader.c:565 load_modules: Unable to open modules directory /opt/usr/lib/asterisk/modules.
Feb 14 12:53:04 WARNING[13951]: loader.c:565 load_modules: Unable to open modules directory /opt/usr/lib/asterisk/modules.
Asterisk Ready.
Executing last minute cleanups

at the same time I am not able to see the web page at

http://192.168.1.1:8088/asterisk/static/config/cfgadvanced.html

Also there is no asterisk process listed when I run PS command...

at the same time there are such files are present @ /opt/etc/asterisk/sample

adsi.conf           enum.conf           musiconhold.conf
adtranvofr.conf     extconfig.conf      osp.conf
agents.conf         extensions.ael      oss.conf
alarmreceiver.conf  extensions.conf     phone.conf
alsa.conf           features.conf       privacy.conf
asterisk.adsi       festival.conf       queues.conf
asterisk.conf       iax.conf            res_odbc.conf
cdr.conf            iaxprov.conf        rpt.conf
cdr_custom.conf     indications.conf    rtp.conf
cdr_manager.conf    logger.conf         sip.conf
cdr_odbc.conf       manager.conf        sip_notify.conf
cdr_pgsql.conf      meetme.conf         skinny.conf
cdr_tds.conf        mgcp.conf           telcordia-1.adsi
codecs.conf         misdn.conf          voicemail.conf
dnsmgr.conf         modem.conf          vpb.conf
dundi.conf          modules.conf        zapata.conf

file http.conf is not present there...

So the question is how to configure it and run?

It looks like I need to install modules into /opt/usr/lib/asterisk/modules but where can I get them?

Also it looks like I need to move config files from /opt/etc/asterisk/sample to /opt/etc/asterisk/ configure them and make them executable? Am I an the right way?

[sonice]

Any Help appreciated with this!

I was following this guide http://gentoo-wiki.com/HOWTO_Asterisk and was able to create some *.config files according to this guide http://econf.switch.ch/econfportal/w.../asterisk.html

Now asterisk starts but I still unable to connect to it with my XLite...

$ /opt/sbin/asterisk -vv
Asterisk 1.2.24, Copyright (C) 1999 - 2007 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'show license' for details.
================================================== =======================
== Parsing '/opt/etc/asterisk/logger.conf': Found
Asterisk Event Logger Started /opt/var/log/asterisk/event_log
Asterisk Dynamic Loader loading preload modules:
== Parsing '/opt/etc/asterisk/modules.conf': Found
== Manager registered action Ping
== Manager registered action Events
== Manager registered action Logoff
== Manager registered action Hangup
== Manager registered action Status
== Manager registered action Setvar
== Manager registered action Getvar
== Manager registered action Redirect
== Manager registered action Originate
== Manager registered action Command
== Manager registered action ExtensionState
== Manager registered action AbsoluteTimeout
== Manager registered action MailboxStatus
== Manager registered action MailboxCount
== Manager registered action ListCommands
Feb 15 10:08:35 NOTICE[670]: manager.c:1686 init_manager: Unable to open management configuration manager.conf. Call management disabled.
Feb 15 10:08:35 NOTICE[670]: cdr.c:1214 do_reload: CDR simple logging enabled.
== RTP Allocating from port range 5000 -> 31000
Asterisk PBX Core Initializing
Registering builtin applications:
[AbsoluteTimeout]
== Registered application 'AbsoluteTimeout'
[Answer]
== Registered application 'Answer'
[BackGround]
== Registered application 'BackGround'
[Busy]
== Registered application 'Busy'
[Congestion]
== Registered application 'Congestion'
[DigitTimeout]
== Registered application 'DigitTimeout'
[Goto]
== Registered application 'Goto'
[GotoIf]
== Registered application 'GotoIf'
[GotoIfTime]
== Registered application 'GotoIfTime'
[ExecIfTime]
== Registered application 'ExecIfTime'
[Hangup]
== Registered application 'Hangup'
[NoOp]
== Registered application 'NoOp'
[Progress]
== Registered application 'Progress'
[ResetCDR]
== Registered application 'ResetCDR'
[ResponseTimeout]
== Registered application 'ResponseTimeout'
[Ringing]
== Registered application 'Ringing'
[SayNumber]
== Registered application 'SayNumber'
[SayDigits]
== Registered application 'SayDigits'
[SayAlpha]
== Registered application 'SayAlpha'
[SayPhonetic]
== Registered application 'SayPhonetic'
[SetAccount]
== Registered application 'SetAccount'
[SetAMAFlags]
== Registered application 'SetAMAFlags'
[SetGlobalVar]
== Registered application 'SetGlobalVar'
[SetLanguage]
== Registered application 'SetLanguage'
[Set]
== Registered application 'Set'
[SetVar]
== Registered application 'SetVar'
[ImportVar]
== Registered application 'ImportVar'
[Wait]
== Registered application 'Wait'
[WaitExten]
== Registered application 'WaitExten'
== Manager registered action DBGet
== Manager registered action DBPut
== Parsing '/opt/etc/asterisk/enum.conf': Found
Asterisk Dynamic Loader Starting:
== Parsing '/opt/etc/asterisk/modules.conf': Found
Asterisk Ready.

Any idea how can I debug?

asterisk -c
Asterisk 1.2.24, Copyright (C) 1999 - 2007 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for d etails.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'show license' for details.
================================================== ==================== ===
[ Booting...Feb 15 10:26:49 NOTICE[748]: cdr.c:1214 do_reload: CDR sim ple logging enabled.
]
Asterisk Ready.
*CLI> set verbose 20
Verbosity was 0 and is now 20
*CLI> set debug 10
Core debug was 0 and is now 10
*CLI> extensions reload
No such command 'extensions' (type 'help' for help)
*CLI> show dialplan
-= 0 extensions (0 priorities) in 0 contexts. =-
*CLI> show modules
Module Description Use Count
0 modules loaded
*CLI>

here is the XLite log-

SEND TIME: 100235234
SEND >> 192.168.1.1:5060
INVITE sip:500@192.168.1.1 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.189:5060;rport;branch=z9hG4bKACBCC53B78B A4044BE064EF498717385
From: First Extension <sip:1234@192.168.1.1>;tag=564606588
To: <sip:500@192.168.1.1>
Contact: <sip:1234@192.168.1.189:5060>
Call-ID: AB4C3390-FB62-4A20-B48B-A87CD6E061F9@192.168.1.189
CSeq: 27023 INVITE
Max-Forwards: 70
Content-Type: application/sdp
User-Agent: X-Lite release 1103m
Content-Length: 297

v=0
o=1234 100224140 100224156 IN IP4 192.168.1.189
s=X-Lite
c=IN IP4 192.168.1.189
t=0 0
m=audio 8000 RTP/AVP 0 8 3 98 97 101
a=rtpmap:0 pcmu/8000
a=rtpmap:8 pcma/8000
a=rtpmap:3 gsm/8000
a=rtpmap:98 iLBC/8000
a=rtpmap:97 speex/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15

[thejew]

show me your extensions.conf and sip.conf and i maybe able to help ya.
btw. the gui is not really usefull at all even if you can make it run.
So you have to get used to config files anyway.

I hope I have some time in the fututre to wright some tutorials for asterisk on this forum. Had that plan allready some month ago!

[sonice]

thejew, thanks for your prompt reply!

I copied all config files from here: http://econf.switch.ch/econfportal/w.../asterisk.html

My extensions.conf file-

[general]
static=yes
writeprotect=yes

[globals]

[default]
exten => 1234,1,Dial(SIP/1234,20)
exten => 1234,2,Voicemail(1234)

exten => 1235,1,Dial(SIP/1235,20)
exten => 1235,2,Voicemail(1235)

[sonice]

Yes, the problem was resolved- I had an old asterisk version 1.2.24 installed.

I just did

ipkg uninstall asterisk

ipkg install asterisk14

reboot

I have such errors in the CLI log-

[Feb 17 02:10:55] WARNING[593]: file.c:568 ast_openstream_full: File vm-theperson does not exist in any format
[Feb 17 02:10:55] WARNING[593]: file.c:871 ast_streamfile: Unable to open vm-theperson (format 0x4 (ulaw)): No such file or directory

[thejew]

Hi again ...
Thats just a minor error you have their.
Asterisk seems to be unable to find some sound files that belong to the mailbox.
Have you installed any additional sound packages like:

ipkg install asterisk14-core-sounds-en-gsm

if not try to, could help.

its available in different codecs if gsm doesnt suit your needs.