Hi, I hope I came to the right place since I like to equip both my 500s with DD-WRT23v2 firmware to set up my network configuration as shown in the drawing. At this very moment I am using the Davolink only, but it will change soon. My setup is described below, when all works properly I will move on to enable USB(2) support on both Asus routers, I guess I will have to equip both Asus 500g routers with either the mini or nokaid to enable USB support (also for optware). I noticed "Assign WAN Port to Switch" did not work for the Davolink, but maybe I was to impatient and will sort this out later...
1. TELE2 Davolink modem (192.168.1.1/5) should be functioning as a dumb modem, so no NAT, no wireless and no DHCP, also the Asus 500g will be connected via LAN directly to this Davolink modem, possibly via WAN port as said earlier.
2. Asus 500g (192.168.1.6) should be functioning as a WLAN (bridge) to Asus 500g deluxe thus excluding Asus 330g. Also port forwarding (NAT), no DHCP and SID "TEST" and last but not least two wired PCs.
3. Asus 500g deluxe (192.168.1.7) should be functioning as a WLAN (bridge) to Asus 500g, also the Asus 330g should be able to connect to this router. No port forwarding, DHCP server enabled, SID "TEST", one wired PC and USB2 printer support.
4. Asus 330g (192.168.1.8) should be functioning as a WLAN client connecting ONLY to Asus 500g deluxe to "TEST" and one PC enabled
5. Both my Nokia 95 and laptop should be able to connect via DHCP to the Asus 500g Deluxe




. My setup is described below, when all works properly I will move on to enable USB(2) support on both Asus routers, I guess I will have to equip both Asus 500g routers with either the mini or nokaid to enable USB support (also for optware). I noticed "Assign WAN Port to Switch" did not work for the Davolink, but maybe I was to impatient and will sort this out later...
Reply With Quote
