Quote Originally Posted by Pandabeer
Hello Oleg,

I presses like you sugessted the reset button on the board (right), the lan leds go to green (all 4) press the restore button, release restore button, release reset button, LAN lied go off, power led is stable on
This is not correct. You should release RESTORE after you've released RESET.
I.e. push RESTORE, push RESET, release RESET, wait for 5 seconds, release RESTORE.

so i thought to be clever and reset the unit once by unplug the power...and this was the result...a dead ASUS WL-500B
That's strange.

Is there another way to go to the flash memory en rewrite it with the good code?
Yes, if you're familar (unlikely) with JTAG port - this provides low level access to hardware and allows flashing dead/empty units...