Results 1 to 6 of 6

Thread: kein Sound an USB Soundkarte

  1. 16-03-2011, 18:14 #1
    Paddy65305
    Paddy65305 is offline Member
    Join Date
    Dec 2008
    Posts
    31

    kein Sound an USB Soundkarte

    Ich hab letzte Woche das tolle Anleitung gesehen bei der man über usbsound-karte also habsch mir mal eine billig 3€ Teil (noname mit aufdruck eCom 3D Sound) gekauft und wollte das mal probieren.
    wenn ich nun per konsolle
    madplay test.mp3


    eintippe dann kommt kein sound(nur:MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al. als ausgabe) kann mir also sparen weiter am phpsound-Script zu arbeiten.

    Hat jmd ne Ahnung woran das liegen kann. oder muss man da noch was zusätzliches installieren für den treiber oder so?




    im LogFile steht zumind mal drin:

    Mar 16 18:36:13 kernel: hub.c: new USB device 00:04.0-1, assigned address 2
    Mar 16 18:36:13 kernel: usb.c: USB device 2 (vend/prod 0x1130/0xf211) is not claimed by any active driver.
    Mar 16 18:36:13 USB audio: attached
    Mar 16 18:36:14 kernel: usb.c: registered new driver audio
    Mar 16 18:36:14 kernel: usbaudio: device 2 audiocontrol interface 0 has 1 input and 1 output AudioStreaming interfaces
    Mar 16 18:36:14 kernel: usbaudio: device 2 interface 2 altsetting 1 channels 1 framesize 2 configured
    Mar 16 18:36:14 kernel: usbaudio: valid input sample rate 24000
    Mar 16 18:36:14 kernel: usbaudio: device 2 interface 2 altsetting 1: format 0x00000010 sratelo 24000 sratehi 24000 attributes 0x00
    Mar 16 18:36:14 kernel: usbaudio: device 2 interface 1 altsetting 0 does not have an endpoint
    Mar 16 18:36:14 kernel: usbaudio: device 2 interface 1 altsetting 1 channels 2 framesize 2 configured
    Mar 16 18:36:14 kernel: usbaudio: valid output sample rate 48000
    Mar 16 18:36:14 kernel: usbaudio: device 2 interface 1 altsetting 1: format 0x01000010 sratelo 48000 sratehi 48000 attributes 0x00
    Mar 16 18:36:14 kernel: usbaudio: registered dsp 14,3
    Mar 16 18:36:14 kernel: usbaudio: registered mixer 14,0
    Mar 16 18:36:14 kernel: usbaudio: registered mixer 14,16
    Mar 16 18:36:14 kernel: audio.c: v1.0.0:USB Audio Class driver
    Mar 16 18:36:14 kernel: usbaudio: set_format_out(): failed to find desired format/speed combination.
    Mar 16 18:36:14 kernel: usbaudio: set_format_out(): failed to find desired format/speed combination.
    Mar 16 18:36:14 kernel: usbaudio: set_format_out(): failed to find desired format/speed combination.
    Mar 16 18:36:14 kernel: usbaudio: set_format_out(): failed to find desired format/speed combination.
    Reply With Quote Reply With Quote
  2. 16-03-2011, 22:32 #2
    jojo_m
    jojo_m is offline Member
    Join Date
    Apr 2007
    Posts
    42
    Also mein Systemlog sieht so aus (s.u.), und madplay funktioniert. Vielleicht ist deine No-name-Soundkarte nicht in Ordnung, oder sie hat nicht die notwendigen Sample-Raten? Es könnte z.B. sein dass deine Sounds z.B. 44.100 kHz haben, aber die Soundkarte unterstützt nur 48.000 kHz

    Code:
    Feb 16 12:06:18 kernel: usb.c: registered new driver audio
Feb 16 12:06:18 kernel: usbaudio: device 2 audiocontrol interface 0 has 1 input and 1 output AudioStreaming interfaces
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 1 channels 2 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 48000
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 1: format 0x01000010 sratelo 48000 sratehi 48000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 2 channels 1 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 48000
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 2: format 0x00000010 sratelo 48000 sratehi 48000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 3 channels 2 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 44100
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 3: format 0x01000010 sratelo 44100 sratehi 44100 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 4 channels 1 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 44100
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 4: format 0x00000010 sratelo 44100 sratehi 44100 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 5 channels 2 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 32000
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 5: format 0x01000010 sratelo 32000 sratehi 32000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 6 channels 1 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 32000
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 6: format 0x00000010 sratelo 32000 sratehi 32000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 7 channels 2 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 22050
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 7: format 0x01000010 sratelo 22050 sratehi 22050 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 8 channels 1 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 22050
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 8: format 0x00000010 sratelo 22050 sratehi 22050 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 9 channels 2 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 16000
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 9: format 0x01000010 sratelo 16000 sratehi 16000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 10 channels 1 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 16000
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 10: format 0x00000010 sratelo 16000 sratehi 16000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 11 channels 2 framesize 1 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 16000
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 11: format 0x01000040 sratelo 16000 sratehi 16000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 12 channels 1 framesize 1 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 16000
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 12: format 0x00000040 sratelo 16000 sratehi 16000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 13 channels 2 framesize 1 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 8000
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 13: format 0x01000040 sratelo 8000 sratehi 8000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 14 channels 1 framesize 1 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 8000
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 14: format 0x00000040 sratelo 8000 sratehi 8000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 15 channels 2 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 11025
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 15: format 0x01000010 sratelo 11025 sratehi 11025 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 16 channels 1 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 11025
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 16: format 0x00000010 sratelo 11025 sratehi 11025 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 17 channels 2 framesize 1 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 11025
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 17: format 0x01000040 sratelo 11025 sratehi 11025 attributes 0x00
Feb 16 12:06:18 kernel: o: device 2 interface 2 altsetting 18 channels 1 framesize 1 configured
Feb 16 12:06:18 kernel: usbaudio: valid input sample rate 11025
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 2 altsetting 18: format 0x00000040 sratelo 11025 sratehi 11025 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 0 does not have an endpoint
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 1 channels 2 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 32000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 48000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 44100
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 1: format 0x01000010 sratelo 32000 sratehi 48000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 2 channels 1 framesize 2 configured
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 32000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 48000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 44100
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 2: format 0x00000010 sratelo 32000 sratehi 48000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 3 channels 2 framesize 1 configured
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 32000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 48000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 44100
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 3: format 0x01000040 sratelo 32000 sratehi 48000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 4 channels 1 framesize 1 configured
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 32000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 48000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 44100
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 4: format 0x00000040 sratelo 32000 sratehi 48000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 5 channels 2 framesize 1 configured
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 32000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 48000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 44100
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 5: format 0x01000008 sratelo 32000 sratehi 48000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 6 channels 1 framesize 1 configured
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 32000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 48000
Feb 16 12:06:18 kernel: usbaudio: valid output sample rate 44100
Feb 16 12:06:18 kernel: usbaudio: device 2 interface 1 altsetting 6: format 0x00000008 sratelo 32000 sratehi 48000 attributes 0x00
Feb 16 12:06:18 kernel: usbaudio: registered dsp 14,3
Feb 16 12:06:18 kernel: usbaudio: registered mixer 14,0
Feb 16 12:06:18 kernel: usbaudio: no mixer controls found for Terminal 5
Feb 16 12:06:18 kernel: audio.c: v1.0.0:USB Audio Class driver
    und hier die Ausgabe von madplay (Ton kommt raus!):

    Code:
    madplay /opt/etc/mp3/Test.mp3
MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al.
error: frame 0: lost synchronization
124 frames decoded (0:00:03.2), -5.2 dB peak amplitude, 0 clipped samples
    Last edited by jojo_m; 16-03-2011 at 22:37.
    Reply With Quote Reply With Quote
  3. 17-03-2011, 13:51 #3
    Paddy65305
    Paddy65305 is offline Member
    Join Date
    Dec 2008
    Posts
    31
    also unter windows läuft die, also zumind nicht komplett defekt.
    Wie kann man den feststellen ob diese auf meinem WL-HDD nicht läuft

    was hast du den für ein Model wenns wirklich an dem stick liegt kann ich ja noch mal ein kauf risikieren.
    Reply With Quote Reply With Quote
  4. 17-03-2011, 19:02 #4
    jojo_m
    jojo_m is offline Member
    Join Date
    Apr 2007
    Posts
    42
    Servus, also ich habe im Lauf der Zeit 3 verschiedene Soundkarten im Einsatz gehabt:

    Nr. 1, Nr. 2 und Nr. 3, die ich momentan verwende. Übrigens auch an einer WL-HDD!

    Mich wundert, dass in deinem Syslog nur von 48.000 kHz Output-Samplingrate die Rede ist. Bei meinen Soundkarten war immer auch 44.100 dabei.

    Du solltest dir mal diesen Thread anschauen: http://wl500g.info/showthread.php?t=22897.

    Hast du den Waveserver im Webinterface wirklich aktiviert?

    Schau auch mal, ob diese Dateien vorhanden sind: /dev/sound/dsp und /dev/sound/mixer. Wenn nicht, wurde die Soundkarte nicht richtig initialisiert.
    Last edited by jojo_m; 17-03-2011 at 19:20.
    Reply With Quote Reply With Quote
  5. 17-03-2011, 21:16 #5
    Paddy65305
    Paddy65305 is offline Member
    Join Date
    Dec 2008
    Posts
    31
    bis auf die printing service (mein drucker kann alleine schon WLAN) ist alles auf YES.

    Code:
    [admin@WL-HDD root]$ cd /dev/sound
[admin@WL-HDD sound]$ ls
dsp  mixer  mixer1
    also wohl kacke soundkarte.
    Reply With Quote Reply With Quote
  6. 21-03-2011, 17:41 #6
    jojo_m
    jojo_m is offline Member
    Join Date
    Apr 2007
    Posts
    42
    Hi, jetzt hab ich mich noch an den entscheidenden Trick erinnert. Probiere mal folgendes:

    Bevor du den madplay-Aufruf machst, erst noch das hier aufrufen:

    Code:
    killall waveserver
killall waveservermain
    (sonst blockiert nämlich der Firmware-interne Waveserver die Soundkarte)

    Also: der Waveserver muss im Webinterface aktiviert sein (damit beim Booten die Sound-Treiber geladen werden), aber dann muss er mit killall wieder beendet werden.

    So müsste es gehen.

    Wenn es klappt, kannst du diese beiden killall-Befehle natürlich auch in die post-boot-Sequenz reinnehmen.
    Last edited by jojo_m; 21-03-2011 at 17:44.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. linuxrc bug? - WL-500g not booting from usb drive with hub
    By daniel632 in forum WL-500g Custom Development
    Replies: 5
    Last Post: 14-03-2012, 15:28
  2. Íåñêîëüêî âîïðîñîâ ïî Samba è USB HDD
    By falselight in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 188
    Last Post: 28-02-2012, 15:43
  3. 7.09 + USB + hotplug
    By oilinki in forum WL-700g Q&A
    Replies: 0
    Last Post: 18-11-2007, 12:51

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules