[HowTo] Sane Scanner-Server with XSane Frontend

[Radon]

I also trying to get samsung scx-4200 working, first all look fine scanimage is working just fine so driver is working. But can't connect from my desktop computer to scanner, telnet to port 6566 can't connect.

added /etc/service "saned 6566/tcp" because that not been there but no help, and /opt/etc/init.d/S01sane-backends look just correct.

So now im just out of idea what im doing wrong, so little help is welcome. Only diffrence to tutorial is my firmware is koppel made if that marks anything.

EDIT: Checked all again and noticed that port again lost from /etc/service/saned file after i reboot my router, so what to do to correct this problem?

Xinetd -d Also give erros and not to start.

10/4/28@16:08:35: DEBUG: 129 {handle_includedir} Reading included configuration
file: /opt/etc/xinetd.d/saned [file=/opt/etc/xinetd.conf] [line=15]
10/4/28@16:08:35: ERROR: 129 {service_fill} Port not specified and can't find se
rvice: saned with getservbyname
Service defaults
        Instances = 60
        CPS = max conn:25 wait:30
        Bind = All addresses.
        Only from:  localhost(HOST) 10.0.0.0/255.0.0.0(NET) 172.16.0.0/255.240.0
.0(NET) 192.168.1.0/255.255.255.0(NET)
        No access: No blocked sites
        Logging to syslog. Facility = authpriv, level = info
        Log_on_success flags = HOST PID
        Log_on_failure flags = HOST

10/4/28@16:08:35: DEBUG: 129 {cnf_start_services} mask_max = 0, services_started
 = 0
10/4/28@16:08:35: CRITICAL: 129 {init_services} no services. Exiting...

EDIT: Full reinstall helps and scanner is working now, not know what was wrong previusly, noticed my router network connection have random dropouts (ipkg give random unknow host errors) problem is on 500gp side, network connection is working fine other computers.