[HowTo] Sane Scanner-Server with XSane Frontend

[adek24]

ok:

10/2/8@22:15:02: DEBUG: 244 {handle_includedir} Reading included configuration file: /opt/etc/xinetd.d/netbios-ns [file=/opt/etc/xinetd.conf] [line=15]
10/2/8@22:15:02: ERROR: 244 {addrlist_op} failed to parse 192.168.XXX.1/24 [file=/opt/etc/xinetd.d/netbios-ns] [line=9]
10/2/8@22:15:02: DEBUG: 244 {handle_includedir} Reading included configuration file: /opt/etc/xinetd.d/netbios-ssn [file=/opt/etc/xinetd.d/netbios-ssn] [line=11]
10/2/8@22:15:03: ERROR: 244 {addrlist_op} failed to parse 192.168.XXX.1/24 [file=/opt/etc/xinetd.d/netbios-ssn] [line=9]
10/2/8@22:15:03: DEBUG: 244 {handle_includedir} Reading included configuration file: /opt/etc/xinetd.d/saned [file=/opt/etc/xinetd.d/saned] [line=11]
10/2/8@22:15:03: ERROR: 244 {service_fill} Port not specified and can't find service: saned with getservbyname
Service defaults
        Instances = 60
        CPS = max conn:25 wait:30
        Bind = All addresses.
        Only from:  localhost(HOST) 10.0.0.0/255.0.0.0(NET) 172.16.0.0/255.240.0.0(NET) 192.168.0.0/255.255.0.0(NET)
        No access: No blocked sites
        Logging to syslog. Facility = authpriv, level = info
        Log_on_success flags = HOST PID
        Log_on_failure flags = HOST

Service configuration: netbios-ns
        id = netbios-ns
        flags = IPv4
        socket_type = dgram
        Protocol (name,number) = (udp,17)
        port = 137
        wait = yes
        user = 0
        Groups = no
        PER_SOURCE = -1
        Bind = All addresses.
        Server = /usr/sbin/nmbd
        Server argv = nmbd
        Only from:  localhost(HOST)
        No access: No blocked sites
        Logging to syslog. Facility = authpriv, level = info
        Log_on_success flags = HOST PID
        Log_on_failure flags = HOST

Service configuration: netbios-ssn
        id = netbios-ssn
        flags = IPv4
        socket_type = stream
        Protocol (name,number) = (tcp,6)
        port = 139
        wait = no
        user = 0
        Groups = no
        PER_SOURCE = -1
        Bind = All addresses.
        Server = /usr/sbin/smbd
        Server argv = smbd
        Only from:  localhost(HOST)
        No access: No blocked sites
        Logging to syslog. Facility = authpriv, level = info
        Log_on_success flags = HOST PID
        Log_on_failure flags = HOST

10/2/8@22:15:03: DEBUG: 244 {cnf_start_services} Started service: netbios-ns
10/2/8@22:15:03: ERROR: 244 {activate_normal} bind failed (Address already in use (errno = 125)). service = netbios-ssn
10/2/8@22:15:03: ERROR: 244 {cnf_start_services} Service netbios-ssn failed to start and is deactivated.
10/2/8@22:15:03: DEBUG: 244 {cnf_start_services} mask_max = 6, services_started = 1
10/2/8@22:15:03: NOTICE: 244 {main} xinetd Version 2.3.14 started with no options compiled in.
10/2/8@22:15:03: NOTICE: 244 {main} Started working: 1 available service
10/2/8@22:15:03: DEBUG: 244 {main_loop} active_services = 1
10/2/8@22:15:28: NOTICE: 244 {general_handler} Unexpected signal 2 (Interrupt)