[HowTo] Install and configure Oleg's firmware

[wengi]

Your hdd is not mounted at all.
what about your syslog?
Any entries regarding hdd?
maybe there is a e2fsck running in background?

wengi

[maurer]

I'm a newbie in this OS although i know some linux.
how do i check syslog?

[wengi]

Have a look at /opt/var/log
there is the syslog/messages.
also type ps axf and see if there is e2fsck running

wengi

[maurer]

i don't have /opt available - 'cause hdd is not mounted.

output from syslog:

Jan 1 01:00:04 kernel: usb.c: registered new driver usbdevfs
Jan 1 01:00:04 kernel: usb.c: registered new driver hub
Jan 1 01:00:04 kernel: usb-uhci.c: $Revision: 1.275 $ time 17:43:15 Jun 21 2009
Jan 1 01:00:04 kernel: usb-uhci.c: High bandwidth mode enabled
Jan 1 01:00:04 kernel: PCI: Enabling device 01:02.0 (0000 -> 0001)
Jan 1 01:00:04 kernel: UHCI: Enabling VIA 6212 workarounds
Jan 1 01:00:04 kernel: usb-uhci.c: USB UHCI at I/O 0x100, IRQ 12
Jan 1 01:00:04 kernel: usb-uhci.c: Detected 2 ports
Jan 1 01:00:04 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 01:00:04 kernel: hub.c: USB hub found
Jan 1 01:00:04 kernel: hub.c: 2 ports detected
Jan 1 01:00:04 kernel: PCI: Enabling device 01:02.1 (0000 -> 0001)
Jan 1 01:00:04 kernel: UHCI: Enabling VIA 6212 workarounds
Jan 1 01:00:04 kernel: usb-uhci.c: USB UHCI at I/O 0x120, IRQ 12
Jan 1 01:00:04 kernel: usb-uhci.c: Detected 2 ports
Jan 1 01:00:05 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan 1 01:00:05 kernel: hub.c: USB hub found
Jan 1 01:00:05 kernel: hub.c: 2 ports detected
Jan 1 01:00:05 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interfa
ce driver
Jan 1 01:00:05 kernel: PCI: Enabling device 01:02.2 (0000 -> 0002)
Jan 1 01:00:05 kernel: ehci_hcd 01:02.2: PCI device 1106:3104
Jan 1 01:00:05 kernel: ehci_hcd 01:02.2: irq 12, pci mem c0147000
Jan 1 01:00:05 kernel: usb.c: new USB bus registered, assigned bus number 3
Jan 1 01:00:05 kernel: EHCI: Enabling VIA 6212 workarounds
Jan 1 01:00:05 kernel: ehci_hcd 01:02.2: USB 2.0 enabled, EHCI 1.00, driver 10
Dec 2004/2.4
Jan 1 01:00:05 kernel: hub.c: USB hub found
Jan 1 01:00:05 kernel: hub.c: 4 ports detected
Jan 1 01:00:05 kernel: usb.c: registered new driver usblp
Jan 1 01:00:05 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 01:00:05 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 01:00:06 kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:06 kernel: usb.c: registered new driver usb-storage
Jan 1 01:00:06 kernel: USB Mass Storage support registered.

also e2fsck is not in ps (no ps axf available also)

[wengi]

okay, that was stupid sorry.
There is no hdd detected in your syslog.
remove all usb devices (printers, hubs, etc).
Only leave hdd connected.

reboot and have a look at the syslog.

wengi

[maurer]

I'll just that when I reach home.
I forgot to mention I'm working remotely - currently at work

[maurer]

i fixed my issue with the HDD by just unplug and then plug it back.

Now I need a tutorial to install the vsftpd.
I found some : macsat, nslu2 - but i have'n succeeded running ftp.

I noticed that in my r381 firmware the vsftpd is installed by default.
How can i fixed the configuration according to my needs?

[wengi]

You can configure the built in ftp via the webinterface.
If this is not working for your needs you can create your own conf and save it in flash.

wengi

[maurer]

how can i forward port 51413 for transmission?

[Lesiuk]

how can i forward port 51413 for transmission?

iptables -I INPUT -m tcp -p tcp --dport 51413 -j ACCEPT

[claudiuid]

Hi

I am a new member of this forum and also new to Linux
I want to thx wengi for this great how
everything worked fine ... till samba
i've installed xinetd then samba2
i have made all the changes in swat settings and everything looked ok but
when i've changed the ip in host alow setting and entered 192.168.1.18/24
and reboot i received

400 Server Error
Samba is configured to deny access from this client
Check your "hosts allow" and "hosts deny" options in smb.conf

i removed and install samba back....same thing
i have a lot of torrents on my usb hdd and i want to copy them to my xp pc

pls help

[EdP]

The solution is right there, in your own post:

Samba is configured to deny access from this client
Check your "hosts allow" and "hosts deny" options in smb.conf

[claudiuid]

Hi again

I checked the settings a few times more and now seems to be ok
thx for the quick answer
now in my workgroup I can see the router but when I try to open it
I get the message

\\Wl-0022152740da\disk0-3is not accessible.You might not have permissionthis network resource.Contact the administrator of this server to find out if u have access permision.
This network name cannot be found.



This is the config pf my samba# Samba config file created using SWAT
# from 192.168.1.18 (192.168.1.18)
# Date: 1970/01/01 01:08:35

# Global parameters
[global]
netbios name = WL-0022152740DA
server string = Samba Optware Server
security = SHARE
admin log = Yes
log file = /opt/var/log/samba/log.%m
max log size = 50
load printers = No
dns proxy = No
guest account = admin
hosts allow = 192.168.1.18

[homes]
comment = Home Directories
read only = No
browseable = No

[printers]
comment = All Printers
path = /opt/var/spool/samba
printable = Yes
browseable = No

[tmp]
comment = Temporary file space
path = /tmp
read only = No
guest ok = Yes

[www]
comment = HTTP server files
path = /opt/share/www
read only = No
guest ok = Yes

[torrent]
comment = torrent files
path = /tmp/mnt/torrent
read only = No
guest ok = Yes


Thx again in advance

[wengi]

... the ip in host alow setting and entered 192.168.1.18/24

Hi and welcome to the forum,

If you are using subnets with /24 you should use a .0 IP.
Try 192.168.1.0/24

wengi

[claudiuid]

thx for the reply wengi
but i need help for the problem described in post #704