W-Lan mit Asus WL500b V2?!?

[systemfehler.ac]

Hello everyone,

I've used the Firmware from Asus in version 1.8.1.9 on my WL500b router.
Now I upgrade to 1.9.2.7-7f for Asus WL-500b in version 2, because of crash every few days.
The new version of firmware is very great. A lot of new powerful feautures.
Thank a lot!
But there a some problems with wlan. I found on the config-page of the router the product id. It seems that I have version 2 of the Asus WL500b router.
Thats means I have a Ralink Wireless PCI Adapter RT2400 / RT2460 wlan-module.
Here some logs:

"message.log":

Jan 1 01:00:03 syslogd started: BusyBox v1.1.3
Jan 1 01:00:03 kernel: 0x000ec4e4-0x003f0000 : "rootfs"
Jan 1 01:00:03 kernel: 0x003f0000-0x00400000 : "nvram"
Jan 1 01:00:03 kernel: 0x003e0000-0x003f0000 : "flashfs"
Jan 1 01:00:03 kernel: sflash: chipcommon not found
Jan 1 01:00:03 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jan 1 01:00:03 kernel: IP Protocols: ICMP, UDP, TCP
Jan 1 01:00:03 kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Jan 1 01:00:03 kernel: TCP: Hash tables configured (established 1024 bind 2048)
Jan 1 01:00:03 kernel: ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
Jan 1 01:00:03 kernel: ip_conntrack_pptp version 1.9 loaded
Jan 1 01:00:03 kernel: ip_nat_pptp version 1.5 loaded
Jan 1 01:00:03 dnsmasq[51]: read /etc/hosts - 4 addresses
Jan 1 01:00:03 dnsmasq[51]: reading /tmp/resolv.conf
Jan 1 01:00:03 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 1 01:00:03 kernel: ipt_time loading
Jan 1 01:00:03 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 1 01:00:03 kernel: IPv6 v0.8 for NET4.0
Jan 1 01:00:03 kernel: IPv6 over IPv4 tunneling driver
Jan 1 01:00:03 kernel: NET4: Ethernet Bridge 008 for NET4.0
Jan 1 01:00:03 kernel: 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
Jan 1 01:00:03 kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan 1 01:00:03 kernel: FAT: bogus cluster size 19
Jan 1 01:00:03 kernel: FAT: bogus cluster size 19
Jan 1 01:00:03 kernel: NTFS: Unable to set blocksize 512.
Jan 1 01:00:03 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:00:03 kernel: Mounted devfs on /dev
Jan 1 01:00:03 kernel: Freeing unused kernel memory: 72k freed
Jan 1 01:00:03 kernel: Warning: unable to open an initial console.
Jan 1 01:00:03 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 01:00:03 kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
Jan 1 01:00:03 kernel: eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
Jan 1 01:00:03 kernel: device eth0 entered promiscuous mode
Jan 1 01:00:03 kernel: br0: port 1(eth0) entering listening state
Jan 1 01:00:03 kernel: br0: port 1(eth0) entering learning state
Jan 1 01:00:03 kernel: br0: port 1(eth0) entering forwarding state
Jan 1 01:00:03 kernel: br0: topology change detected, propagating
Jan 1 01:00:04 kernel: usb.c: registered new driver usbdevfs
Jan 1 01:00:04 kernel: usb.c: registered new driver hub
Jan 1 01:00:04 kernel: usb-ohci.c: USB OHCI at membase 0xb8004000, IRQ 2
Jan 1 01:00:04 kernel: usb-ohci.c: usb-00:04.0, PCI device 14e4:4715
Jan 1 01:00:04 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 01:00:04 kernel: hub.c: USB hub found
Jan 1 01:00:04 kernel: hub.c: 2 ports detected
Jan 1 01:00:05 kernel: lp0: using parport0 (polling).
Jan 1 01:00:05 kernel: usb.c: registered new driver usblp
Jan 1 01:00:05 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 01:00:07 kernel: usb.c: registered new driver audio
Jan 1 01:00:07 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 01:00:07 kernel: Linux video capture interface: v1.00
Jan 1 01:00:08 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 01:00:09 kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:09 kernel: usb.c: registered new driver usb-storage
Jan 1 01:00:09 kernel: USB Mass Storage support registered.
Jan 1 01:00:12 pppd[84]: Plugin rp-pppoe.so loaded.
Jan 1 01:00:12 pppd[84]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
Jan 1 01:00:12 pppd[85]: pppd 2.4.2 started by admin, uid 0
Jan 1 01:00:12 kernel: lp driver: get device ID
Jan 1 01:00:12 kernel: neg fail
Jan 1 01:00:17 pppd[85]: PPP session is 25088
Jan 1 01:00:17 pppd[85]: Using interface ppp0
Jan 1 01:00:17 pppd[85]: Connect: ppp0 <--> eth1
Jan 1 01:00:18 kernel: lp driver: get device ID
Jan 1 01:00:18 kernel: neg fail
Jan 1 01:00:18 kernel: neg fail

.... lsmode ....

Module Size Used by
usb-storage 62184 0 (unused)
sd_mod 13292 0 (unused)
scsi_mod 70216 1 [usb-storage sd_mod]
videodev 8344 0 (unused)
audio 50680 0 (unused)
soundcore 5320 0 [audio]
printer 12676 0 (unused)
lp 8668 0
parport_splink 2956 1
parport 25696 1 [lp parport_splink]
usb-ohci 21940 0 (unused)
usbcore 77264 1 [usb-storage audio printer usb-ohci]
ipt_NETMAP 992 2
ip_nat_starcraft 2224 0 (unused)
et 34912 0 (unused)


... ifconfig....

br0 Link encap:Ethernet HWaddr 00:0E:A6:16:22:C9
inet addr:192.168.6.10 Bcast:192.168.6.255 Mask:255.255.255.0
inet6 addr: fe80::20e:a6ff:fe16:22c9/10 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:320019 errors:0 dropped:0 overruns:0 frame:0
TX packets:338647 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:25002664 (23.8 MiB) TX bytes:392808403 (374.6 MiB)

eth0 Link encap:Ethernet HWaddr 00:0E:A6:16:22:C9
inet6 addr: fe80::20e:a6ff:fe16:22c9/10 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:320019 errors:0 dropped:0 overruns:0 frame:0
TX packets:383913 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:30763006 (29.3 MiB) TX bytes:395524401 (377.2 MiB)
Interrupt:3 Base address:0x2000

eth1 Link encap:Ethernet HWaddr 00:0E:A6:16:22:C9
inet6 addr: fe80::20e:a6ff:fe16:22c9/10 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:290725 errors:2 dropped:0 overruns:0 frame:1
TX packets:319621 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:372125002 (354.8 MiB) TX bytes:29664928 (28.2 MiB)
Interrupt:4 Base address:0x8000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1
RX packets:105275 errors:0 dropped:0 overruns:0 frame:0
TX packets:105275 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9029433 (8.6 MiB) TX bytes:9029433 (8.6 MiB)

ppp0 Link encap:Point-Point Protocol
inet addr:xx.xx.xx.xx P-t-P:xx.xx.xx.xx Mask:255.255.255.255
UP POINTOPOINT RUNNING MULTICAST MTU:1492 Metric:1
RX packets:274778 errors:0 dropped:0 overruns:0 frame:0
TX packets:303669 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:363958708 (347.0 MiB) TX bytes:22477931 (21.4 MiB)

It seems that no module for wlan is loaded. A modprobe wl do not work.
What can I do?

Thanks
Manuel