Hi!
Since my connection speed has been raised from 2000 kBit/s to 6000 kBit/s I only get 1000 kBit/s downstream and about 180 kBit/s upstream. The WL500g is flashed with the current firmware v1.9.2.7CR7e. Everything worked fine with the line speed at 2000 kBit/s. Now, if I connect the pc directly to the Xentrix modem, I get full speed (6000/640). Connected to the router, I get the low speed either via WLAN and LAN. Changing the MTU/MRU in the router configuration didn't help. Disabling the Firewall didn't do it either.
Any suggestions?
Problem with the PPoE driver?
Do I have to buy a new router?
Thanks in advance.
Best Regards
hvonjomega
