Results 1 to 15 of 15

Thread: DHCP - Assign IP Address Manually

  1. #1

    DHCP - Assign IP Address Manually

    Hi!

    I have 3 workstation and i want use DHCP - Assign IP Address Manually feature for one worksation, but it doesn't work. I set the 'Enable Manual Assignment' option to 'Yes', i assigned the MAC address to IP address.
    The manually configured MAC address, always get the next free IP address, don't use the manually assigned IP list. Why? It's a bug or what wrong? I use firmware 1.8.1.9.

    Thanks!

    Derfel

  2. #2
    Join Date
    Nov 2004
    Location
    Germany
    Posts
    7
    It works here....

  3. #3
    Join Date
    Nov 2004
    Location
    Sweden
    Posts
    259
    I have tried it with 3 hosts/workstations. Two MAC addresses has been defined with fix IP addresses but the third. It works fine on 1.8.1.9 when the router delivers IP addresses via DCHP to the hosts.

  4. #4
    Quote Originally Posted by Tamadite
    I have tried it with 3 hosts/workstations. Two MAC addresses has been defined with fix IP addresses but the third. It works fine on 1.8.1.9 when the router delivers IP addresses via DCHP to the hosts.
    Hm! It's interesting! Can you send me the DHCP Server configuration page? And one more question: Do you use Wireless host? Thanks!

  5. #5
    Join Date
    Nov 2004
    Location
    Sweden
    Posts
    259
    Here you go...

    In fact, one of the assigned MAC addresses is used on a wireless laptop.
    Attached Images Attached Images  
    Last edited by Tamadite; 21-11-2004 at 23:32.

  6. #6
    Thanks! My settings is almost same as there, but doesn't work... My router IP address is: 192.168.1.254, not set domain, IP pool is: 192.168.1.4-192.168.1.253, and the manually assigned IPs is 192.168.1.2 and 192.168.1.3. The 192.168.1.2 is a PC with W-138g network card. The PC is get the 192.168.1.4.... Grrrr!

  7. #7
    Join Date
    Nov 2003
    Location
    Eindhoven
    Posts
    2,407
    Quote Originally Posted by Derfel
    Thanks! My settings is almost same as there, but doesn't work... My router IP address is: 192.168.1.254, not set domain, IP pool is: 192.168.1.4-192.168.1.253, and the manually assigned IPs is 192.168.1.2 and 192.168.1.3. The 192.168.1.2 is a PC with W-138g network card. The PC is get the 192.168.1.4.... Grrrr!
    eventually use a custom firmware, it should work then as it is using another dhcp daemon

    My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook



    WL500g Forum Asus Files OpenDir

    Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO

  8. #8
    Quote Originally Posted by Antiloop
    eventually use a custom firmware, it should work then as it is using another dhcp daemon
    Ehh! In other word the official v1.8.1.9 firmware's DHCP daemon is malfunctioning?
    Which one custom firmware is reliable?

  9. #9
    Join Date
    Nov 2003
    Location
    Eindhoven
    Posts
    2,407
    Quote Originally Posted by Derfel
    Ehh! In other word the official v1.8.1.9 firmware's DHCP daemon is malfunctioning?
    Which one custom firmware is reliable?
    possibly yes, I'm not using official asus firmware

    knocks at asus's door not mine

    you can just use version 1.8.1.7-3 find it here: https://wl500g.info/showthread.php?t=1169
    Last edited by Antiloop; 22-11-2004 at 10:09.

    My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook



    WL500g Forum Asus Files OpenDir

    Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO

  10. #10
    Quote Originally Posted by Antiloop
    possibly yes, I'm not using official asus firmware

    knocks at asus's door not mine

    you can just use version 1.8.1.7-3 find it here: https://wl500g.info/showthread.php?t=1169

    Many thanks!

  11. #11
    I think so, i found the bug... If i turn off the special applications [Starcraft(Battle.Net) to No on NAT Setting - Virtual DMZ], then the DHCP - Assign IP Address Manually feature doesn't work... It's really a bug or this is the normal operational mode?

  12. #12
    Join Date
    Nov 2004
    Location
    Germany
    Posts
    7
    Quote Originally Posted by Derfel
    IP pool is: 192.168.1.4-192.168.1.253, and the manually assigned IPs is 192.168.1.2 and 192.168.1.3.
    You're trying to manually assign an address that is not in your defined IP pool. Obviously, this cannot work...

  13. #13
    Join Date
    Sep 2004
    Location
    NL
    Posts
    206
    Quote Originally Posted by mojo
    You're trying to manually assign an address that is not in your defined IP pool. Obviously, this cannot work...
    Seems to work for Tamadite though; http://wl500g.info/showthread.php?p=7356#post7356
    Brubber

    WL-500g, WL-138g, WL-160g

  14. #14
    Quote Originally Posted by mojo
    You're trying to manually assign an address that is not in your defined IP pool. Obviously, this cannot work...
    It's work, if the special applications feature is turned of...

  15. #15
    Join Date
    Sep 2004
    Location
    Utrecht NL
    Posts
    6

    Maybe: difference in case

    Quote Originally Posted by Derfel
    Thanks! My settings is almost same as there, but doesn't work... My router IP address is: 192.168.1.254, not set domain, IP pool is: 192.168.1.4-192.168.1.253, and the manually assigned IPs is 192.168.1.2 and 192.168.1.3. The 192.168.1.2 is a PC with W-138g network card. The PC is get the 192.168.1.4.... Grrrr!
    I am using firmware v.1.7.5.9 CR5 and with that I have noticed that the system is case sensitive for the mac addresses. Maybe this also the problem for you.

    Mark

Similar Threads

  1. Cannot Manually Assign IP nos according to MAC adds
    By judgenick in forum WL-500g Q&A
    Replies: 9
    Last Post: 26-07-2005, 11:12
  2. WAN dropped connection - had to connect manually
    By sdspecy in forum WL-500g Q&A
    Replies: 1
    Last Post: 05-06-2005, 13:42
  3. Forced Assign IP Address To MAC Addresses
    By ArtM in forum WL-500g Q&A
    Replies: 4
    Last Post: 23-02-2005, 20:10
  4. more Manually Assigned IP ???
    By Viper_Jaro in forum WL-500g Q&A
    Replies: 5
    Last Post: 03-01-2005, 11:47
  5. edit smb.conf manually ?
    By martin700 in forum WL-HDD Q&A
    Replies: 4
    Last Post: 13-12-2004, 18:43

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •