Results 1 to 2 of 2

Thread: wl700ge / ipv6 sux?

  1. #1
    Join Date
    May 2007
    Location
    amsterdammed
    Posts
    15

    Smile wl700ge / ipv6 sux?

    hello
    just got a f3jc asus notebook with giga nic and noticed that after a while the
    whole internet on my lan crashed...odd. then noticed that this laptop is using
    ipv6+ipv4. would that cause this problem? next issue that happened is that the
    router died shortly after messing around with a reinstall of the 1042 nas firmware

    leaving it off for a day or so then will power up but i can not http:// to 192.168.1.1
    nor ping. only when i use static ip 1.2 on my nic i can sucksesfully
    ping the address but still is a nogo. hdd spins but seems to be empty. also ftp
    in dosbox fails. my lack of knowledge also sux cause i have not yet searched
    this forum for how to restore from scratch.

    anyone in amsterdammed city can help?

  2. #2
    Join Date
    May 2007
    Location
    amsterdammed
    Posts
    15
    just spend 8min on this forum to have it solved with the upload of the 1042
    .nas file and the resque700g.exe tool...i can access the http://192.168.1.1
    again and still dono what happened to the wl700ge.

    i not sure about the ipv6 but i will deselect this from my network card.
    anyone tsted if i could use a notebook hdd 120gb on this router...less
    noise/heat. the default 160gb disk is starting to make noise in the nite
    \0/ if you cant fixit, dont fuckit

Similar Threads

  1. HOWTO use your WL-500g as IPv6 router
    By phedny in forum WL-500g/WL-500gx Tutorials
    Replies: 8
    Last Post: 17-02-2008, 07:19
  2. WL700ge as mail server (xmail)
    By hal2k1 in forum WL-700g Firmware Discussion
    Replies: 15
    Last Post: 21-06-2007, 16:45
  3. Asus SL 500 en ipv6
    By peet in forum Dutch Discussion - Nederlands
    Replies: 0
    Last Post: 04-02-2006, 12:59

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •