Firmware v1.8.1.9

[Viper_Rus]

USE THIS FIRMWARE AT YOUR OWN RISK!
Firmware for the WL-300g can be found here:

http://www.asus.com/pub/ASUS/wireles..._WL300g_EN.zip
http://www.asus.com.tw/pub/ASUS/wire..._WL300g_EN.zip
ftp://ftp.asus.com.tw/pub/ASUS/wirel..._WL300g_EN.zip
http://www.asuscom.de/pub/ASUS/wirel..._WL300g_EN.zip
http://www.asus.it/pub/ASUS/wireless..._WL300g_EN.zip
ftp://www.asus.it/pub/ASUS/wireless/..._WL300g_EN.zip

Changelog:

currently not known

important!!

When upgrading from 1.7.x.x based firmware: you MUST Reset your WL300g to defaults via the restore button at the back when the power is already on after upgrading to this firmware!

you do not have to do this when you upgrade from 1.8.x.x based firmware!
but it is suggested when you encounter problems

Do not import saved settings from older/other firmwares! this can cause unstability to your device

[Viper_Rus]

Now! WPA Secure Mode work in WDS Bride connention mode.

[Goner]

posted link does not work anymore ... :-(

does anybody have a link that works ???

edit : oh wait, it works now !! don't know what happened, but i'm downloading.
thanks !!

wonder why they didn't put it on their regular wl-300g page ??
http://www.asus.com.tw/support/downl...elName=WL-300G

[Goner]

anybody else tried this one ??

i had to reset the AP to it's defaults because i couldn't log in as 'admin' anymore. not with the password i set and not with the default password ... so i had to set it up again completely ; WEP, MAC-filter etc.

and it thinks it's Jan 1 1970 ... ('date -s' command doesn't seem to work).

[Viper_Rus]

anybody else tried this one ??

i had to reset the AP to it's defaults because i couldn't log in as 'admin' anymore. not with the password i set and not with the default password ... so i had to set it up again completely ; WEP, MAC-filter etc.

and it thinks it's Jan 1 1970 ... ('date -s' command doesn't seem to work).

How and where send "data -s" command?

[Goner]

How and where send "data -s" command?

use : http://<ip-address>/Main_AdmStatus_Content.asp
you can then give Linux commands - this was first used for the WL-300g power-hack.

edit : use 'date 100622522004' (mmddhhmmccyy) to set date/time to 6 oct 2004 22:52