Results 1 to 11 of 11

Thread: Firmware v1.8.1.9

  1. #1
    Join Date
    Sep 2004
    Location
    Russia, Saint-Petersburg
    Posts
    422

    Exclamation Firmware v1.8.1.9

    USE THIS FIRMWARE AT YOUR OWN RISK!
    Firmware for the WL-300g can be found here:

    http://www.asus.com/pub/ASUS/wireles..._WL300g_EN.zip
    http://www.asus.com.tw/pub/ASUS/wire..._WL300g_EN.zip
    ftp://ftp.asus.com.tw/pub/ASUS/wirel..._WL300g_EN.zip
    http://www.asuscom.de/pub/ASUS/wirel..._WL300g_EN.zip
    http://www.asus.it/pub/ASUS/wireless..._WL300g_EN.zip
    ftp://www.asus.it/pub/ASUS/wireless/..._WL300g_EN.zip

    Changelog:
    currently not known

    important!!
    When upgrading from 1.7.x.x based firmware: you MUST Reset your WL300g to defaults via the restore button at the back when the power is already on after upgrading to this firmware!

    you do not have to do this when you upgrade from 1.8.x.x based firmware!
    but it is suggested when you encounter problems

    Do not import saved settings from older/other firmwares! this can cause unstability to your device
    Last edited by Antiloop; 05-10-2004 at 00:00.

  2. #2
    Join Date
    Sep 2004
    Location
    Russia, Saint-Petersburg
    Posts
    422
    Now! WPA Secure Mode work in WDS Bride connention mode.

  3. #3
    Join Date
    Feb 2004
    Location
    Rotterdam, Netherlands
    Posts
    18
    posted link does not work anymore ... :-(

    does anybody have a link that works ???

    edit : oh wait, it works now !! don't know what happened, but i'm downloading.
    thanks !!

    wonder why they didn't put it on their regular wl-300g page ??
    http://www.asus.com.tw/support/downl...elName=WL-300G
    Last edited by Goner; 04-10-2004 at 15:28.

  4. #4
    Join Date
    Feb 2004
    Location
    Rotterdam, Netherlands
    Posts
    18
    anybody else tried this one ??

    i had to reset the AP to it's defaults because i couldn't log in as 'admin' anymore. not with the password i set and not with the default password ... so i had to set it up again completely ; WEP, MAC-filter etc.

    and it thinks it's Jan 1 1970 ... ('date -s' command doesn't seem to work).

  5. #5
    Join Date
    Sep 2004
    Location
    Russia, Saint-Petersburg
    Posts
    422
    Quote Originally Posted by Goner
    anybody else tried this one ??

    i had to reset the AP to it's defaults because i couldn't log in as 'admin' anymore. not with the password i set and not with the default password ... so i had to set it up again completely ; WEP, MAC-filter etc.

    and it thinks it's Jan 1 1970 ... ('date -s' command doesn't seem to work).
    How and where send "data -s" command?

  6. #6
    Join Date
    Feb 2004
    Location
    Rotterdam, Netherlands
    Posts
    18
    Quote Originally Posted by Viper_Rus
    How and where send "data -s" command?
    use : http://<ip-address>/Main_AdmStatus_Content.asp
    you can then give Linux commands - this was first used for the WL-300g power-hack.

    edit : use 'date 100622522004' (mmddhhmmccyy) to set date/time to 6 oct 2004 22:52
    Last edited by Goner; 06-10-2004 at 22:53.

  7. #7

    Radio Control

    Under Status & Log / Wireless, there is a new option "radio control", which can be enabled or disabled. Anyone knows what this does?

  8. #8
    Join Date
    Nov 2003
    Location
    Eindhoven
    Posts
    2,407
    Quote Originally Posted by CanterwoodBoy
    Under Status & Log / Wireless, there is a new option "radio control", which can be enabled or disabled. Anyone knows what this does?
    yeah

    it enables or disables your radio(thus your wireless)

    My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook



    WL500g Forum Asus Files OpenDir

    Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO

  9. #9
    Join Date
    Sep 2004
    Location
    NL
    Posts
    206

    Rtfm

    Quote Originally Posted by CanterwoodBoy
    Under Status & Log / Wireless, there is a new option "radio control", which can be enabled or disabled. Anyone knows what this does?
    This was already present in 1.6.5.3, the manual on the CD that came with your router will tell you what it's doing
    Brubber

    WL-500g, WL-138g, WL-160g

  10. #10
    Is the WL330G also supported with this firmware ?

  11. #11
    Join Date
    Nov 2003
    Location
    Eindhoven
    Posts
    2,407
    Quote Originally Posted by Lionking
    Is the WL330G also supported with this firmware ?
    no certainly not

    AFAIK it is not linux based at this moment.. and perhaps never will be

    if someone wants to sponsor me a WL330g i'll see if there is potentional to add a forum for it

    My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook



    WL500g Forum Asus Files OpenDir

    Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •