I tried it, but nothing. =( it was a error too =(
try changing user = root to change to admin. That is if you logon to the box as admin.
I tried it, but nothing. =( it was a error too =(
To quote a post from earlier in this thread:
All the ^M characters you see in the log are linefeed characters. They are probably in the config file because you edited it on a windows/dos (mac?) machine.
Make sure there are no more line feed characters in the file, for instance by starting over using vi.
http://www.brandonhutchinson.com/DOS...haracters.html
hi all!
I have a WL500gP with Oleg's firmware v.1.9.2.7-10
Canon i-SENSYS MF4010 is connected to the router. Printing is no problem,but scanning...
On the sane-project.org it is said that the device may be supported but is untested.
sane-find-scanner says that it's found USB scanner:
but scanimage -L says thatPHP Code:
found USB scanner (vendor=0x04a9 [Canon Inc.], product=0x26b4 [MF4010]) at libusb:003:002
Has anybody managed to scan with this device using SANE?PHP Code:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Could anybody please say if there is some working backend for this device?
Thanks.
Further investigations
pixma backend is of 0.14.3 version:
I have installed sane-backends_1.0.19+cvs20080315-3_mipsel.ipkPHP Code:
$ SANE_DEBUG_PIXMA=21 scanimage -L
[sanei_debug] Setting debug level of dll to 0.
[sanei_debug] Setting debug level of pixma to 21.
[pixma] pixma version 0.14.3
[pixma] pixma_find_scanners() found 0 devices
But there is pixma v.0.15 in CVS already! I've googled in linux.debian.bugs.dist, that
I'm not very familiar with compiling... Could somebody do this good job and recompile sane-backends 1.0.19 including latest CVS?"several new ImageCLASS
MFPs are now supported by the pixma backend in CVS (v. 0.15.0).
Plus, the new pixma backend also supports BJNP network scanning for
several PIXMA MFPs, which would probably be welcomed by PIXMA
owners."
It would be greatly appreciated by many users of new Canon devices...
Last edited by hooke; 19-02-2009 at 09:06.
WL500gP(Oleg's firmware v.1.9.2.7-10) + USB Flash 1024Mb. 3-4 wifi users. Printer Canon i-SENSYS MF4010 via USB - printing OK (WAN&LAN). SANE installed, and pixma backend does work! FTP server - OK (WAN&LAN, vsftpd v.2.0.7)
Hello all,
I'd like to ask anyone for help. I have an Epson DX4400 printer/scanner combo. I did everythink as described in the walkthrough, but I'm getting some strange error messages:
Result of sane-find-scanner
scanimage -L says nothing found.found USB scanner (vendor=0x04b8 [Language Error], product=0x083f [Language Error]) at libusb:001:002
Any ideas?
EDIT: While I was googling around a bit, I found that I'm most likely missing the epkowa backend... Is there a chance of somebody compiling it for Oleg's firmware for WL500g Premium?
Last edited by corwin_x; 12-03-2009 at 12:29.
Hi,
I've got the following problem.
I set up the sane-server on my WL500gP. Now I try to connect a Canon MP830 to the server.
scanimage -L
andCode:[admin@ASUS_WL500GP root]$ scanimage -L device `pixma:04A91713' is a CANON Canon PIXMA MP830 multi-function peripheral
look good in my opinion.Code:found USB scanner (vendor=0x04a9 [Canon], product=0x1713 [MP830]) at libusb:003:005
The sane-service is also started:
Code:Service configuration: saned id = saned flags = IPv4 socket_type = stream Protocol (name,number) = (tcp,6) port = 6566 wait = no user = 0 group = 0 Groups = no PER_SOURCE = -1 Bind = All addresses. Server = /opt/sbin/saned Server argv = saned Only from: localhost(HOST) 10.0.0.0/255.0.0.0(NET)172.16.0.0 255.240.0.0(NET) 192.168.0.0/255 .255.0.0(NET) No access: No blocked sites Logging to syslog. Facility = authpriv, level = info Log_on_success flags = HOST PID Log_on_failure flags = HOST 09/3/15@16:40:51: DEBUG: 1206 {cnf_start_services} Started service: saned
Now if I try to scan an image out of XSane, I get the error-message
Any idea what could be the reason for that?Code:ERROR DURING READ: Error during device I/O
Thanks
Oliver
Last edited by carterb; 15-03-2009 at 15:45.
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
Hello,
i have problems with a wl500gx Oleg 1.9.2.7-10
i have install sane but i downt get my HP AIO 5610 to run
i Have ead in the thread that it gives a hplip in the reository but how can
i install it ?
dit some one have run a working installation with a hp aio scanner ?
thanks Powertrain
What's wrong?Code:[admin@WL-001FC642402C modules]$ ipkg install sane-backends Nothing to be done An error ocurred, return value: 4. Collected errors: Cannot find package sane-backends. Check the spelling or perhaps run 'ipkg update' [admin@WL-001FC642402C modules]$ cat /opt/etc/ipkg.conf #Uncomment the following line for native packages feed (if any) #src/gz native http://ipkg.nslu2-linux.org/feeds/optware/oleg/native/stable #src/gz optware http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable src unslung http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable dest /opt/ / #option verbose-wget
Hi everybody,
for all of you, who have problems by setting up a sane scanne-server on your Asus-Router:
I compiled the actual stable version of the sane-server on my router and it works fine. The ipkg-package is not up to date, many scanners are not supported and you also need a newer version of router-firmware.
I wrote a little HowTo on how to setup the scanner-server with the XSane Frontend in the german Forum. If there are many users interested in a english translation, I can translat it an post it in the Tutorials section.
If you are able to read it in german language look here.
Edit: Here is the english translation of the Sane-Server How-To
Regards
Oliver
Last edited by carterb; 16-09-2009 at 09:58.
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
Hi all,
While getting scanner to work, I can't execute xinetd binary file from USB flash:
Package inetd is not found.Code:/opt/etc/init.d/S10xinetd: line 14: /opt/sbin/xinetd: not found $ /opt/sbin/xinetd -d -sh: /opt/sbin/xinetd: not found $ ls -l /opt/sbin/xinetd -rwxr-xr-x 1 admin root 195092 Jul 11 2008 /opt/sbin/xinetd
I tried both VFAT and ext3 journaling system (by mke2fs -j).
Hi,
tell us some more about your issue.
What system are you using, wich firmware?
How did you install the sane-scanner-server? Self-compiled or ipkg?
Did you try it after my tutorial?
If yes, please ask in the according thread, this thread is not well supported.
Bye
Oliver
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
Hi,
I'm using Oleg firmware 1.9.2.7 on DLink DIR-320. sane-backends and xinetd are installed by ipkg.
I'll try your tutorial later (I've seen it before), but the strange is I can't execute any executable file from my USB flash even when it is ext3 formatted. Of course, it's a bit off-topic here.
Maybe I'll try another USB flash disk.
Hi,
is your Disk mounted correctly?
Any other software working with xinetd.
Please post the output of:
and:Code:df
and move to folder /opt/Code:free
and do aCode:cd /opt
Please post all the outputs. I'm not that familiar with your hardware.Code:ls -all
Didi you setup your Router after wengis tutorial?
No problem, the whole thread is out of dateOf course, it's a bit off-topic here
Last edited by carterb; 25-09-2009 at 09:55.
Regards / Grüße,
Oliver
[How-To] Sane Scanner-Server mit XSane Frontend "german"
[How-To] Sane Scanner-Server with XSane Frontend "english"
Router: Wl500gP v1 nach Wengi's HowTo mit FW 1.9.2.7-d-r599
Speicher: Trekstor DataStation maxi 1 Tb
Clients: Kathrein UFS910 FullHD Sat Receiver, PS3, PCs, Canon MP830 an Sane Scanner-Server, Kyocera-Mita FS1020D über Printserver
I'm trying to follow alex_g's suggestions from 23-08-2005 -
6) add the following line to /etc/services:
saned 6566/tcp # SANE network scanner daemon
but I can't seem to edit my /etc/services file. It seems the filesystem is read-only, and I can't figure out how to make it rw. I'm running dd-wrt on an ASUS WL-520GU.
root@asus_router:/# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
/dev/mtdblock/4 on /jffs type jffs2 (rw)
/dev/discs/disc0/part1 on /opt type ext3 (rw)
I've tried lots of variations of the "mount" command to change it to rw, including
mount -no rw /
and other similar iterations. Every time I go back and check the status, the root fs is still (ro). Does anyone know how to change this?