Page 2 of 14 FirstFirst 123412 ... LastLast
Results 16 to 30 of 197

Thread: Помогите восстановить Asus WL-700gE

  1. #16
    Join Date
    Aug 2006
    Location
    Moscow, Russia
    Posts
    788
    unimozg, можно просто указать маску 255.255.254.0 на роутере и всех компах в lan1-lan2.

    kazak_vmik, у тебя тоже 700ge? Про него ничего сказать немогу. А прошивке Олега можно сделать любой из портов или группы портов LAN отдельным интерфейсом со всеми вытекающими (поиск по robocfg)

  2. #17
    У меня WL-500Gp, залита прошивка Олега. Так мне гуглить по robocfg? На форуме ничего путного (а главное конкретного) найти не удалось :-(Где взять подробное описание robocfg (желательно на русском)?
    Last edited by kazak_vmik; 24-07-2007 at 22:03.

  3. #18
    Join Date
    Aug 2006
    Location
    Moscow, Russia
    Posts
    788
    Quote Originally Posted by kazak_vmik View Post
    Так мне гуглить по robocfg? На форуме ничего путного (а главное конкретного) найти не удалось :-(
    Ну какже, в инструкции по настройки с нуля в 13-ом пункте про robocfg рассказывается. http://wl500g.info/showpost.php?p=20276&postcount=3
    Quote Originally Posted by kazak_vmik View Post
    Где взять подробное описание robocfg (желательно на русском)?
    robocfg --help
    А на русском информация я думаю что только на этом форуме есть, т.к. автор программы Олег.

    з.ы. Я думаю эта более подходящая тема для обсуждения wl500gp с прошивкой от Олега http://wl500g.info/showthread.php?t=8056
    Last edited by Mam(O)n; 24-07-2007 at 23:00.

  4. #19
    Join Date
    Apr 2007
    Location
    Ukraine, Kremenchug
    Posts
    11

    Помогите настроить мегадевайс ASUS WL-700gE

    Приобрёл два месяца назад мегадевайс ASUS WL-700gE
    в сети провайдер раздаёт инет через VPN.
    настроил на маршрутизаторе интернет через PPTP- всё замечательно работало. Но неделю назад провайдер чегото сделал с серверами и PPTP неподнимается, в логе пишется следующее
    Jul 25 16:44:26 pppd[1179]: Using interface ppp0
    Jul 25 16:44:26 pppd[1179]: local IP address 10.64.64.64
    Jul 25 16:44:26 pppd[1179]: remote IP address 10.112.112.112
    Jul 25 16:44:26 pppd[1179]: Starting link
    Jul 25 16:44:26 pppd[1179]: Serial connection established.
    Jul 25 16:44:26 pppd[1179]: Connect: ppp0 <--> /dev/pts/0
    Jul 25 16:44:41 pptp[1186]: warn[connect_timeoutptp_callmgr.c:359]: connect timeout for 15 seconds
    Jul 25 16:44:41 pptp[1186]: warn[open_inetsockptp_callmgr.c:391]: connect: Operation now in progress
    Jul 25 16:44:41 pptp[1186]: fatal[callmgr_mainptp_callmgr.c:134]: Could not open control connection to 192.168.1.2
    Jul 25 16:44:41 pptp[1184]: fatal[open_callmgrptp.c:361]: Call manager exited with error 256
    Jul 25 16:44:41 pppd[1179]: Modem hangup
    Jul 25 16:44:41 pppd[1179]: Connection terminated.
    Jul 25 16:45:12 pppd[1179]: Starting link
    Jul 25 16:45:12 pppd[1179]: Serial connection established.
    Jul 25 16:45:12 pppd[1179]: Connect: ppp0 <--> /dev/pts/0
    Jul 25 16:45:27 pptp[1211]: warn[connect_timeoutptp_callmgr.c:359]: connect timeout for 15 seconds
    Jul 25 16:45:27 pptp[1211]: warn[open_inetsockptp_callmgr.c:391]: connect: Operation now in progress
    Jul 25 16:45:27 pptp[1211]: fatal[callmgr_mainptp_callmgr.c:134]: Could not open control connection to 192.168.1.2
    Jul 25 16:45:27 pptp[1210]: fatal[open_callmgrptp.c:361]: Call manager exited with error 256
    Jul 25 16:45:27 pppd[1179]: Modem hangup
    Jul 25 16:45:27 pppd[1179]: Connection terminated.
    Jul 25 16:45:57 pppd[1179]: Starting link
    Jul 25 16:45:58 pppd[1179]: Serial connection established.
    Jul 25 16:45:58 pppd[1179]: Connect: ppp0 <--> /dev/pts/0
    Jul 25 16:46:13 pptp[1240]: warn[connect_timeoutptp_callmgr.c:359]: connect timeout for 15 seconds
    Jul 25 16:46:13 pptp[1240]: warn[open_inetsockptp_callmgr.c:391]: connect: Operation now in progress
    Jul 25 16:46:13 pptp[1240]: fatal[callmgr_mainptp_callmgr.c:134]: Could not open control connection to 192.168.1.2
    Jul 25 16:46:13 pptp[1238]: fatal[open_callmgrptp.c:361]: Call manager exited with error 256
    Jul 25 16:46:13 pppd[1179]: Modem hangup
    Jul 25 16:46:13 pppd[1179]: Connection terminated.
    Изза этого пришлось на маршрутизаторе настроить Static IP, а VPN поднимать с компьютера. При наличии дома двух компьютеров это очень неудобно. Провайдер помогать отказывается- мол на компютере всё работает, а маршрутизаторы мы ненастраиваем...

    Помогите настроить аппарат пожалуйста

  5. #20
    Посмотри тут, может найдешь настройки для своего провайдера, краем уха слышал что возможны какие то геморы с TTL, поищи на форуме, может то, а может и я чет путаю.

  6. #21
    Join Date
    Jan 2007
    Location
    The Netherlands
    Posts
    244

    Question Please use English here

    Quote Originally Posted by NikNikols View Post
    Приобрёл два месяца назад мегадевайс ASUS WL-700gE
    This is an English-speaking forum, so you might try to make yourself clear in English, please.
    What's the language you are using, by the way. Russian?

    Marc

  7. #22
    Join Date
    Apr 2007
    Location
    Ukraine, Kremenchug
    Posts
    11
    Quote Originally Posted by mumsoft View Post
    This is an English-speaking forum, so you might try to make yourself clear in English, please.
    What's the language you are using, by the way. Russian?

    Marc
    Yes, Russian... I speak in english very bed

  8. #23
    Join Date
    Jan 2007
    Location
    The Netherlands
    Posts
    244

    Talking

    Quote Originally Posted by NikNikols View Post
    Yes, Russian... I speak in english very bed
    I sea.. ;-)
    My Russian is no good either.
    But as I understand there are many Russian forums. Maybe it is better to use these for you?

    I was in St. Petersburg some weeks ago. Beautiful city, but unfortunately I don't speak Russian.

    Love,
    Marc

  9. #24
    The Russian forums mainly related to wl-500, there is not russian wl-700 forums around. All my topics of wl-700 lost in wl-500 and oleg firmware flames...

    So what about your PPTP problem? TTL restrictions?

    P.S. BTW, i don't think someone missed the question afer reading ENGLISH log:
    Jul 25 16:45:57 pppd[1179]: Starting link
    Jul 25 16:45:58 pppd[1179]: Serial connection established.
    Jul 25 16:45:58 pppd[1179]: Connect: ppp0 <--> /dev/pts/0
    Jul 25 16:46:13 pptp[1240]: warn[connect_timeoutptp_callmgr.c:359]: connect timeout for 15 seconds
    Jul 25 16:46:13 pptp[1240]: warn[open_inetsockptp_callmgr.c:391]: connect: Operation now in progress
    Jul 25 16:46:13 pptp[1240]: fatal[callmgr_mainptp_callmgr.c:134]: Could not open control connection to 192.168.1.2
    Jul 25 16:46:13 pptp[1238]: fatal[open_callmgrptp.c:361]: Call manager exited with error 256
    Jul 25 16:46:13 pppd[1179]: Modem hangup
    Jul 25 16:46:13 pppd[1179]: Connection terminated.
    Last edited by mawr; 03-08-2007 at 13:41.

  10. #25

    Плохо перепрошил wl-700

    Помогите кто разбирается.Подключил его к консоли и замкнул 9 и 10 пин рядом с процом.Вот что пишет CFE

    CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
    Build Date: ?| 12¤e 29 20:36:58 CST 2005 (root@localhost.localdomain)
    Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

    Initializing Arena
    Initializing Devices.
    et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
    rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
    CPU type 0x29006: 264MHz
    Total memory: 67108864 KBytes

    Total memory used by CFE: 0x80800000 - 0x8089BA00 (637440)
    Initialized Data: 0x80831B70 - 0x80834250 (9952)
    BSS Area: 0x80834250 - 0x80835A00 (6064)
    Local Heap: 0x80835A00 - 0x80899A00 (409600)
    Stack Area: 0x80899A00 - 0x8089BA00 (8192)
    Text (code) segment: 0x80800000 - 0x80831B70 (203632)
    Boot area (physical): 0x0089C000 - 0x008DC000
    Relocation Factor: I:00000000 - D:00000000

    Device eth0: hwaddr 00-18-F3-73-9E-2D, ipaddr 192.168.1.1, mask 255.255.255.0
    gateway not set, nameserver not set
    Null Rescue Flag.
    Null Restore Flag.
    set pivot_wait = 0
    Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
    Loading: ..... 2723840 bytes read
    Entry at 0x80001000
    Closing network.
    Starting program at 0x80001000
    CPU revision is: 00029006
    Primary instruction cache 16kb, linesize 16 bytes (2 ways)
    Primary data cache 16kb, linesize 16 bytes (2 ways)
    Linux version 2.4.20 (root@localhost.localdomain) (gcc version 3.0 20010422 (pre
    release) with bcm4710a0 modifications) #212 Wed Aug 30 16:57:52 CST 2006
    BCM47XX ChipID = 0x4704, RevisionID = 8, Options = 0x2
    Setting GPIO 3 to output of 1.
    Setting GPIO 6 to output of 1.
    Determined physical RAM map:
    memory: 04000000 @ 00000000 (usable)
    On node 0 totalpages: 16384
    zone(0): 16384 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
    CPU: BCM4704 rev 8 at 264 MHz
    Calibrating delay loop... 263.78 BogoMIPS
    Memory: 61896k/65536k available (2424k kernel code, 3640k reserved, 132k data, 8
    4k init, 0k highmem)
    Dentry cache hash table entries: 8192 (order: 4, 65536 byte
    Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
    Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
    Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
    Page-cache hash table entries: 16384 (order: 4, 65536 bytes)

  11. #26
    Checking for 'wait' instruction... unavailable.
    POSIX conformance testing by UNIFIX
    PCI: Fixing up bus 0
    PCI: Fixing up bridge
    PCI: Fixing up bus 1
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting ks
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NTFS driver v1.1.22 [Flags: R/O]
    i2c-core.o: i2c core module
    i2c-dev.o: i2c /dev entries driver module
    i2c-core.o: driver i2c-dev dummy driver registered.
    i2c-algo-bit.o: i2c bit algorithm module
    i2c-proc.o version 2.6.1 (20010825)
    pty: 256 Unix98 ptys configured
    Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
    abled
    ttyS00 at 0xb8000300 (i
    ttyS01 at 0xb8000400 (irq = 0) is a 16550A
    Generic MIPS RTC Driver v1.0
    Uniform Multi-Platform E-IDE driver Revision: 6.31
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    AEC6265: IDE controller on PCI bus 01 dev 10
    PCI: Enabling device 01:02.0 (0000 -> 0003)
    AEC6265: chipset revision 16
    AEC6265: not 100% native mode: will probe irqs later
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    AEC6265: ROM disabled at 0x00000000
    ide2: BM-DMA at 0x0180-0x0187,
    ide3: BM-DMA at 0x0188-0x018f, BIOS settings: hdgio, hdhio
    PPP generic driver version 2.4.2
    PPP Deflate Compression module registered
    PPP BSD Compression module registered
    SCSI subsystem driver Revision: 1.00
    scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    Amd/Fujitsu Extended Query Table v1.0 at 0x0040
    Physically mapped flash: JEDEC Device ID is 0xC4. Assuming broken CFI table.
    Physically mapped flash: Swapping erase regions for broken CFI table.
    number of CFI chips: 1
    Flash device: 0x200000
    Physically mapped flash: cramfs filesystem found at block 1410
    Creating 4 MTD partitions on "Physically mapped flash":
    0x00000000-0x00040000 : "cfe"
    0x00040000-0x001f0000 : "linux"
    0x00160b04-0x001f0000 : "rootfs"
    0x001f0000-0x00200000 : "nvram"
    sflash: found no supported devices
    usb.c: registered new driver usbdevfs
    usb.c: registered new driver hub
    PCI: Enabling device 01:03.2 (0000 -> 0002)
    ehci_hcd 01:03.2: PCI device 1106:3104
    ehci_hcd 01:03.2: irq 2, pci mem c000d000
    usb.c: new USB bus registered, assigned b
    ECHI PCI device 31041106 found.
    ECHI reg 0x49 = 80242720
    ECHI reg 0x49 changed to = 80242700
    ECHI reg 0x4b = 80242709
    ECHI reg 0x4b changed to = 80242729
    PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correctin
    g to 32
    ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4

  12. #27
    new device strings: Mfr=3, Product=2, SerialNumber=1<6>hub.c: USB hub found
    hub.c: 4 ports detected
    host/usb-uhci.c: $Revision: 1.275 $ time 16:59:10 Aug 30 2006
    host/usb-uhci.c: High bandwidth mode enabled
    PCI: Enabling device 01:03.0 (0000 -> 0001)
    ECHI PCI device 30381106 found.
    UCHI reg 0x41 = 10
    UCHI reg 0x41 changed to = 0
    host/usb-uhci.c: USB UHCI at I/O 0x200, IRQ 2
    host/usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 2
    new device strings: Mfr=0, Product=2, SerialNumber=1<6>hub.c: USB hub found
    hub.c: 2 ports detected
    PCI: Enabling device 01:03.1 (0000 -> 0001)
    ECHI PCI device 30381106 found.
    UCHI reg 0x41 = 10
    UCHI reg 0x41 changed to = 0
    host/usb-uhci.c: USB UHCI at I/O 0x220
    host/usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 3
    new device strings: Mfr=0, Product=2, SerialNumber=1<6>hub.c: USB hub found
    hub.c: 2 ports detected
    host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    host/usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
    host/usb-ohci.c: usb-00:03.0, PCI device 14e4:4715
    usb.c: new USB bus registered, assigned bus number 4
    new device strings: Mfr=0, Product=2, SerialNumber=1<6>hub.c: USB hub found
    hub.c: 2 ports detected
    usb.c: registered new driver usblp
    printer.c: v0.13: USB Printer Device Class driver
    Initializing USB Mass Storage driver...
    usb.c: registered new driver usb-storage
    USB Mass Storage support registered.
    md: linear personality registered as nr 1
    md: raid0 personality registered as nr 2
    md: raid1 personality registered as nr 3
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: Skipping autodetection of RAID arrays.
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of
    TCP: Hash tables configured (established 4096 bind 8192)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    NET4: Ethernet Bridge 008 for NET4.0
    802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
    All bugs added by David S. Miller <davem@redhat.com>
    VFS: Mounted root (cramfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 84k freed
    Algorithmics/MIPS FPU Emulator v1.5

    pivot_rc starting...
    pivot_rc proceeding to boot from disk...
    ERROR(a):mount_pivot_point failed to mount location : /dev/ide/host2/bus0/target
    0/lun0/part1...
    ERROR(b):mount_pivot_point error : No such file or directory...
    pivot_rc boot loop error for location 0...
    ERROR(a):mount_pivot_point failed to mount location : /dev/ide/host2/bus0/target
    0/lun0/part2...
    ERROR(b):mount_pivot_point error : No such file or directory...
    pivot_rc boot loop error for location 1...
    pivot_rc did not boot -> hang wait for network loading...
    Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
    Symbol version prefix ''
    Warning: loading /lib/modules/2.4.20/kernel/drivers/net/et/et.o will taint the k
    ernel: no license
    See http://www.tux.org/lkml/#export-tainted for information about tainted modu
    les
    eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.39.0
    Module et loaded, with warnings
    vlan0: No such device
    eth1: No such device
    eth0: No such process
    Waiting for new image on IP 192.168.1.1.
    Waiting for announcement from download server...

    tftp не работает и telnet Тоже не коннектит.Жму ctrl+c безрезультатно
    Last edited by Amlet1; 06-10-2007 at 13:36.

  13. #28

  14. #29
    Quote Originally Posted by kirnikitin View Post
    Читал благодарю.Оказалось ez-setup не с первого раза заработал.В этом и была проблема.

  15. #30

    Angry после прошивки Asus WL-700gE недоступен

    Все, до перепрашивался, блин...
    Был Asus WL-700gE с последней родной его прошивкой (1.0.7.8)
    я его перепрошил openwrt, прошивку взял с http://wl700g.homelinux.net/drupal/?q=node/24
    но "change root to hdd" не сделал, зайдя по telnet роутер стал виснуть, то есть я даже недобился ls -la и я его перегрузил, теперь он молчит
    не каких ping 192.168.1.1 и т.д.
    на роутере горит READY и сетевой порт в которые подключен комп (192.168.1.11)
    RESET не помог
    что теперь? в помойку?
    arp -s 192.168.1.100 его_мак так же результатов не дало
    Last edited by georglk; 05-01-2008 at 21:20.

Page 2 of 14 FirstFirst 123412 ... LastLast

Similar Threads

  1. Backfire 10.03 for Asus wl-700gE?
    By rahul1023 in forum WL-700g Firmware Discussion
    Replies: 8
    Last Post: 21-11-2011, 22:51
  2. Asus WL-700gE
    By nos96 in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 252
    Last Post: 28-02-2009, 12:44
  3. Asus WL-700gE Pictures outside and internal
    By Styno in forum WL-700g Pics & Specs
    Replies: 6
    Last Post: 24-11-2006, 19:37
  4. New czech forum about WL-700gE/Novй ceske forum o WL-700gE
    By Darth Neo in forum WL-700g Firmware Discussion
    Replies: 0
    Last Post: 22-11-2006, 23:28

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •