Press and hold reset button more than 10 second.
Hi,
I migrate from dd-wrt to OLEG
1) reset in dd-wrt
2) asus Tool firmware restoration
3) restore the last OLEG 1.9.2.7-7f => test telnet => prompt come to screen
4) plug out & plug in to reboot
5) restore bouton => reboot
5) wifi "dd-wrt" appear (can't connect) and telnet don't accept admin/admin
i don't understand
how-to moving from dd-wrt to OLEG?
Press and hold reset button more than 10 second.
I use wl500g-clear-nvram.trx and wl500g-recover.trx befote OLEG firmware
and all is OK now!!!
GOOGLE!
Have you tried the 'firmware restoration tool' which is supplied on the original asus cd, shipped with your router?
After a hard reset of the modem this tool assums your computers ip is 192.168.1.10 and that of your asus is 192.168.1.1
You can select a firmware to upload to your asus.
I once had a comparable situation (only not after migrating from dd-wrt) when I was not able to login onto the asus... I used the firmware restoration tool and it worked.
Hope this helps...
(I don't know if this applies to you, but there is a pin 9 trick, search this board)
WL500g Premium v1 Oleg 1.9.2.7-10 500gb hdd [storage-disk] - 250gb hdd [download-disk]
Transmission HellaNZB mysql php lighttpd myphpadmin samba AIOCP CMSimple AmpJuke ADOS
HeadStart
How to measure Energy consumption
yes I did the pin9 trick when suddenly dd-wrt did not want to work anymore....
After that I tried both with the Asus restoration tool and as well with tftp but none worked..all the time I put oleg firmware I cant login and the router shows as dd-wrt....putting back dd-wrt works...
any suggestions please...I did research whole day and tried all sorts and bits but seems nothing is working and I hate this dd-wrt since its very unstable on the wl500gp