Dead unit
Hi
The unit was flashed with olegs fw then in a moment of total stupidity I flashed my wl300g with dd-wrt and it become very unstable. I resetted it and it went totally dead.
I did the pin 10 trick and I could ping the unit. Ive tried to flash it with olegs fw but the tftp method didnt work (no tftp server running on the wl300g). Therefore I used the asus firmware restoration utility to flash it with original firmware and again the unit went in zombie mode.
Now the power led is constantly on and it wont reply ping requests. reset button doesnt work either. My guess is that I have screwed up nvram when I flashed it. Does the clean nvram fw for wl500g work on wl300g or am I totally screwed?
Reply With Quote