1.7.5.9-4 Firewall/Filter rules bug ?
First of all many thanks to Oleg and all contributors to this forum without which I would have a pretty useless WL500g.
Ok, my issue is I have been using the same wan/lan filter rules consistently, but since 1.7.5.9-CR3 I find that the router is doing all sorts of funny things.
1. it doesnt seem to like more than a couple of entries.
2. if I have 10 entries and delete 1 then all the rules screw up.
3. if the rules appear to work on first restart ( or reboot ) but soon as something is dropped because of the rules ( this is good ) then ALL THE REST OF THE OTHER RULES START GETTING BLOCKED ( This is Bad )
4. I have reflashed, no change.
Am I doing some thing stupid? Is the Web interface no longer used to set the filter rules
Anyone have any idea as to the problem ?
Here are the entries used :
S_IP PR D_IP PR Prot
80 192.168.1.100 1000:65000 udp
80 192.168.1.100 1000:65000 tcp
443 192.168.1.100 1000:65000 tcp
110 192.168.1.100 1000:65000 tcp
5190 192.168.1.100 1000:65000 tcp
1863 192.168.1.100 1000:65000 tcp
500 192.168.1.100 1000:65000 udp
4500 192.168.1.100 4500 udp
5060 192.168.1.100 5061 udp
3478 192.168.1.100 3478 udp
24680 192.168.1.100 500 tcp
Then if I web access it works first of all then
if I try another application such as Sipps which uses 3 standard port ranges to connect I allow just one of the ranges through 5060/5061 ( this did work and still does without the router ) the router blocks the first attemp 8000/8002 and then BLOCKS evrything from the onwards
The syslog shows that drop eth1 bri0 udp,s-ip 80, dst-ip 1781 Now that should be allowed based on the the rule set above.
Also the same rules appear to work on a Debian acting as a firewall.
Anyone have any ideas?
Thanks in advance.
__________________
My Kit :
Asus Wl-500w 1.9.8.2 & WL500gd 1.9.4.6 ( WPA-PSK, WDS, Samba, DM, FTP, Epson PhotoStylus RX620 )
Samsung X30 Centrino 1.7, 1Gb, 60Gb, 2200BG - Fujitsu 7010S 1.6, 1Gb, 60Gb, 2200BG - Cisco Cat 4003 - Network Appliance NAS/SAN F270 2TB