Great job jeromv! Do you have an html version I could use as the basis for updating the extremely bland existing page?
- K.C.
Great job jeromv! Do you have an html version I could use as the basis for updating the extremely bland existing page?
- K.C.
Hi folks,
actullay you can forget about this post - just read it if you're facing the same problem which was solved after downloading the WL700gE_1.0.4.6_kc_02a.nas file again.
I simple can't get WL700gE_1.0.4.6_kc_02a.nas installed.
At the moment I have the original Asus 1.0.4.6 firmware installed on the router and following all the different upgrading FAQ I always get the same error message from the firmware restoration tool
It does not want to write the backup on c:\ but tells me it can't write in a temp-directory on my PC - please see attached picture.
Anybody a hint ?
Best regards,
Extreme
P.S.: up- or down-grading the original firmware is no problem.
Last edited by Extreme; 18-02-2007 at 19:23.
@ Extreme
I had the same error message.
1. Watch out you save the firmware on a small path like your c harddrive
2. Check the sice of your firmware...it has to be about 17 mb!!!! not like 300kb like mine had when i got that error message. If your´s does has about 300kb redownload it ...maybe with firefox or something else than IE
Hi folks,
first I would like to thank you all - especially kfurge for his great work.
I think now that the problem was that I did not wait long enough before I started the upload via the Asus firmware tool.
@kfurge (or anybody who knows):
When I log in as root, I always have to manually do this:
export PATH=/opt/bin:${PATH}
export LD_LIBRARY_PATH=/opt/lib:${LD_LIBRARY_PATH}
How can I implement this so that it standard ?
I saw these lines in the rc.local file but when I log in it's not activated
Do I have to make a .profile or profile file ? If yes, where do I need to put this file ?
I would appreciate if you or someone else could help me with that.
Regards,
Extreme
thx, kfurge - I'll try that.
regards,
Extreme
ANd where can I donwload it? Maybe I missed that part.... sorry!
http://home.comcast.net/~kfurge/wl700g.html
Search for profile. You'll have to rename the file on the website from profile to .profile.
- K.C.
Hi kfurge,
I am simply toooooooooo stupid.
Everything works fine except the .profile file.
Where do I have to put it ?
Seems that the WL-700GE ignores that it is there
Can't place it in /etc/ of course (where it should be in a standard system I think) and in /opt/etc/ it does not help yet ...
Regards and thanks in advance,
Extreme
mount -o bind /opt/etc/profile /etc/profile
I would also be very thanksful of an image file for the router of the custom firmware or if it comes, an dd wrt firmware
if anybody makes an image of the custom firmware, then please include everything like torrent etc.