Considering you still have to buy a HDD its still cheapOriginally Posted by Antiloop
Does backdoor at Main_AdmStatus_Content.asp exists?Originally Posted by copycat
If so, the firmware could be extracted, but you need to know there you harddisk is mounted. To do so, you need to execute (remember to press Refresh, not Enter!)
Post results here. I will let you know that to do at the next step. (Thinking now hard )Code:mount
Also, I'm interested in the output of
command.Code:dmesg
Considering you still have to buy a HDD its still cheapOriginally Posted by Antiloop
So, the idea is to copy the firmware to your harddrive. The command should look like this (note brackets - they're important!):Originally Posted by Oleg
you need to replace /tmp/harddisk with right mount point.Code:(cat /dev/mtd/0 > /tmp/harddisk/pmon) (cat /dev/mtd/1 > /tmp/harddisk/flash)
Backdoor exists.Originally Posted by Oleg
Mount gives:
rootfs on / type rootfs (rw)
/dev/root on / type cramfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
/dev/ide/host0/bus0/target0/lun0/part1 on /tmp/harddisk/part1 type ext2 (rw,sync)
/dev/ide/host0/bus0/target0/lun0/part2 on /tmp/harddisk/part2 type ext2 (rw,sync)
/dev/ide/host0/bus0/target0/lun0/part3 on /tmp/harddisk/part3 type ext2 (rw,sync)
I don't know what dmesg is for but now I'm having a hard time getting in the menu again..
Dmesg just puts out the boot messages from the kernel, should not harm anything, just give some longer output like mount did.
Whats not working now, no web frontend at all, or cant you login ?
My Stuff: WL-500g, Mapower H31x 10GB HD, Philips Webcam Vesta PRO, TerraTec Webcam PRO, USB Hub
frontend was gone, had to restart. Now it's ok. I'll post the menu shots now.
Menu screen 1
Menu screen 2
Menu screen 3
menu screen 4
ROFL
Thats an all-time joke of life, Linux-Device stating best viewd with IE.
Can´t Asus guys make a clean browser-independant front-end...
P.s: Can you do a "ps -a" in the page you typed in the mount thing ??
My Stuff: WL-500g, Mapower H31x 10GB HD, Philips Webcam Vesta PRO, TerraTec Webcam PRO, USB Hub
menu screen 5
menu screen 6
PID Uid Stat CommandOriginally Posted by WlanMan
1 0 S init noinitrd
2 0 S [keventd]
3 0 S [ksoftirqd_CPU0]
4 0 S [kswapd]
5 0 S [bdflush]
6 0 S [kupdated]
7 0 S [mtdblockd]
32 0 S [khubd]
47 0 S infosvr br0
52 0 S httpd
86 0 S upnp -D -L br0 -W br0
87 0 S udhcpc -i br0 -p /var/run/udhcpc.pid -s /tmp/udhcpc
88 0 S smbd -D
90 0 S nmbd -D
95 0 S sh -c ps -a > /tmp/syscmd.log
96 0 R ps -a
Hey! snmb! I know what that is!
Thx
smbd, nmbd, looks quite similar to Oleg´s Firmware mods...
Asus should send him a wl-hdd for payment
My Stuff: WL-500g, Mapower H31x 10GB HD, Philips Webcam Vesta PRO, TerraTec Webcam PRO, USB Hub