Firmware v1.7.5.9 CR5

[Oleg]

This is a bug fix release, following 1.7.5.9-4. BigPond should work now.
Firmware is available here. Sources are here.

!!! Antiloop, please mirror firmware file.

Mirror: tx to wisi
http://www.kjo-msp.de/wl-500g/wl500g-1.7.5.9-5.zip

Mirror @ Chupa.nl:
http://files.wl500g.info/asus/wl500g...-1.7.5.9-5.zip

find sources & rootfs here:
http://files.wl500g.info/asus/wl500g...zed/1.7.5.9-5/


Regarding QoS discussions ETC refer to the following pages only! NO DISCUSSION INHERE about setting up etc
http://wiki.wl500g.info/index.p...ageWondershaper
http://wl500g.info/showthread.php?t=752

[Wisi]

in some seconds there will be a fast mirror in germany:

http://www.kjo-msp.de/wl-500g/wl500g-1.7.5.9-5.zip

download

[shopping]

oleg, please try to add the webconfig for the Qos as well. i 've no idea how to use that sharp the traffic in linux. or could you give a reference to teach me step by step in linux?

[Oleg]

1.7.5.9 will never had this in the web. Use command line interface instead. It's pretty easy.

[polous]

I have downloaded this firmware .zip, but I cannot extract the .trx file (
I tried every link in this thread, but with same result. So tried previous version RC4 and it works right.

Can anybody say what's wrong ??

2oleg: can you release also bzip or gzip packages ?

thx polous
[using linux slack10]

[Antiloop]

i don't know if Oleg has fixed his ZIP but mine was corrupted

correct one is available for download

[Oleg]

mine is ok.

[Wisi]

sorry guys, it was my fault

i renamed the file for uploading to .txt and so it was uploaded as ascii not as binary

so i was the fault, blame me for the failure, now it should be correct

sorry!!! it is not olegs fault, its only mine

[shopping]

1.7.5.9 will never had this in the web. Use command line interface instead. It's pretty easy.

i know easy for u, but not me. i don't know how to. i need several basic start doc to explain what i need to do. include how to connect router in CMD line. how to configure QoS or other fuctions in the CMD line. no idea. new linux user. the doc on your site is custom firmware -- too complex for my level.

[Antiloop]

i know easy for u, but not me. i don't know how to. i need several basic start doc to explain what i need to do. include how to connect router in CMD line. how to configure QoS or other fuctions in the CMD line. no idea. new linux user. the doc on your site is custom firmware -- too complex for my level.

refer to those 2 pages only from now on, regarding QoS questions:
http://wiki.wl500g.info/index.php/PackageWondershaper
https://wl500g.info/showthread.php?t=752