USB serial high speed patch

[neo_tester]

Thank you for the configuration files.

The problem is that i'm really a noob, dont know anything abou linux, programming etc... and still want to use Huawei E220 with Asus WL500gp.

I'm a windows xp user that have putty but dont know anything about the commands that must be given to place the files in router or do the configuration, i just know how to login via telnet :P

Anyone could give me the exact sequence of the commands that i must execute (please have in mind that i havent done anything else after install the firmware). If putty is apprpriate for this? This should be very basic for you but for me it's a dead end.

Thanks.

[neo_tester]

Used System Setup > Flashfs Management and upload the *.tar file gently given by xipbox on Asus WL500GP but problem persists.

On the log:
usbserial.c: Generic converter detected
Jan 1 01:00:07 kernel: usbserial.c: Buffer size for bulk_in is 64 modem reports 64
Jan 1 01:00:07 kernel: usbserial.c: Buffer size for bulk_out is 64 modem reports 64
Jan 1 01:00:07 kernel: usbserial.c: Generic converter now attached to /dev/usb/tts/1

Speed is still limited to 250Kbps

Please advise.

Cheers.

[neo_tester]

Finally understand how to import files correctly...

I found a new problem:
On my dial up connection username and password cannot be null
Coreect data:
Username: vodafone
Password: vodafone

Can anyone create me a new *tar file with these data, please.

Thanks.

[gadget]

I have the same problem.

I upload the file to the asus wl500gp, but i break on the steeps.

Podem explicar em tuga se quizerem ajudava mesmo LOLOL

[gadget]

Done!

I understude... my english, dahhh.

Feito em bom Português!!

[gadget]

I have another problem ...

When i reboot the router de configuration desapears.

I need to put de config files again.

[ricabrantes]

Onde ponho o pin do cartão?

[uatara]

I have made everything Denoud said. But the speed is still limited - 250 kBps.
Could anyone help please!

[klokancz]

Running solution:

1. Download latest firmware from http://koppel.cz/cdmawifi/download/
   . Flash it by web admin interface "Firmware upgrade".
   
2. After restart of Asus choose through the web interface "USB Connection" -> * "User defined".
   
3. Upload attached file dial.huawei.tar.gz on "USB Connection" -> "User Dial-Up Files".
   
4. Setup your provider username/password/apn/number in "USB Connection" -> "User Dial-Up Config". Get that info from your provider or maybe down on this page
   

[uatara]

klokancz , GREAT THANKS TO YOU !! The problem is solved!

[ant9]

Is it really necessary to flash this new firmware, or is there a way to stick with olegs and use the E220 at full speed?

Thinking of the time put in my router configuration gives me a headache

Thanks!

[geezerpl]

I have made everything klokancz said. But the speed (data transfer) is still limited to 384 kbps. If connecting the E220 to PC I get 1100-1200 kpbs.
I installed the latest firmware 1,67 on my ASUS.

Could anyone help please!?

Which firmware should reside inside Huawei ??
I've got the 11.117.08.00.00....

[geezerpl]

Finally understand how to import files correctly...

Could you pls share it with us then ?

[uatara]

Could you pls share it with us then ?

this file is attached to klokancz's last post.
Did you upload it to your router ?

[klokancz]

I have made everything klokancz said. But the speed (data transfer) is still limited to 384 kbps. If connecting the E220 to PC I get 1100-1200 kpbs.
I installed the latest firmware 1,67 on my ASUS.

Could anyone help please!?

Which firmware should reside inside Huawei ??
I've got the 11.117.08.00.00....

I don't think that firmware of Huawei has anything to do with your speed.
Maybe you use wrong APN? Some providers has more of them, like the Austrian One.at... Call to your provider and check that.