Moin!
Hat schon jemand seinen WL500GP auf 32 MB Ram aufgebohrt?
Laut HowTo soll das ja bei einem GP möglich sein (http://wl500g.info/showthread.php?t=5909)
Mich würde interessieren, welche Vorteile das bringt und wie groß das Risiko dabei ist.Extend RAM to 32MB
After flashing Oleg's FW on your box, it has by default 16MB RAM, but on the PCB are 32MB. By changing some NVRAM variables you can make the hole 32MB RAM accessable.
Attention! This just works with Premium boxes! Use this section on your own risk! It can damage your box!
Code:
nvram set sdram_init=0x0009
nvram set sdram_ncdl=0
nvram commit
rebootYou can check the success by typing
Code:
free
free zeigt bei mir:per nvram show habe ich folgende (aktuelle) Werte ermittelt:total used free shared buffers
Mem: 13932 12364 1568 0 1192
Swap: 524276 3116 521160
Total: 538208 15480 522728
sdram_init=0x000b
sdram_ncdl=0x203