Results 1 to 11 of 11

Thread: replace burnt transistor?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    replace burnt transistor?

    Hello all,
    I stupidly destroyed my asus wl500G by pluging in the wrong power supply (30v instead of 5v ). So now my nice asus is dead, but I still have hope: I can see that the first transistor after the power inlet is burnt, so I hope maybe I can solder a new one in it. Now my question/request: does anyone know what exactly the type of this transistor is?

    I also upload a picture so I hope it is clear which part I mean. It looks like it's called "L22" but I am not sure because it is burnt so I can't read it properly. My asus is a WL 500 G R2.40.

    thx
    Attached Images Attached Images  

  2. #2
    Join Date
    Apr 2005
    Location
    Vienna, Austria
    Posts
    191
    Transistors normally have three pins (see the larger one near it), this could be a resistor, diode or a fuse, which would make sense. If it's a fuse, you could try to bridge it with a short cable, or by soldering. This could work, a long there's no reason for the no more existing fuse to melt (means overcurrent again).
    Is L22 printed on the PCB or on the burnt fuse(?)?
    Does anybody know what kind of parts are normally tagged with Lnn?

  3. #3

    Pcb

    It's printed on the PCB, the 'fuse' or chip or whatever it was (it makes sense to suppose it was a fuse) is so damaged it is impossible to read anything that may have been on it.

    Your answer matches my guess: the rest of the asus looks really neat, and because this part comes directly after the inlet for the power I indeed hope it is only a fuse (or has this function). Actually I'm glad you suggest I could try just by-pass it, I was considering doing so.

    Thx for thinking along, if anyone could indeed confirm this is probably just a fuse, then I will gladly grab my soldering stuff.

  4. #4

    Talking It worked

    Well I just hot-wired that thing and guess what: it works!
    Wauw, really good little piece of machinery, taking 6 times the amount of electricity it'sd made for, and still alive and kicking. So that part that burned _was_ indeed a fuse, and did exactly what a fuse is meant for.

    I join a bad mobile phone pic of my crappy soldering - but hey, it works!
    Attached Images Attached Images  

  5. #5
    Join Date
    May 2004
    Location
    France...
    Posts
    159
    You are really lucky !

    But now that you hot wired the fuse, the next mistake will be fatal to your unit !
    The Struggle Continues...
    Asus WL500g #1 with fw 1.9.2.7-7f running as main home gateway, with Philipps PWC730k
    Asus WL500g #2 with fw 1.9.2.7-7f running as Wireless Client, running palantir 2.6 with SPCA5xx camera on 128MB generic USB key

  6. #6
    Prefix L is often used for inductance.

Similar Threads

  1. Replace router or not?
    By dakua in forum WL-500gP Q&A
    Replies: 3
    Last Post: 06-09-2006, 07:44
  2. Dlink DSM-G600 will replace wl-700g ?
    By tophinus in forum WL-700g Pics & Specs
    Replies: 3
    Last Post: 06-12-2005, 15:19
  3. Replace broken antenna
    By BigOooze in forum WL-500g Q&A
    Replies: 1
    Last Post: 13-10-2005, 23:53

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •