Results 1 to 6 of 6

Thread: Wifi performance

  1. #1

    Wifi performance

    I have tried posting to openwrt forum but didn't get ab answer so trying here as this forum is more specific to wl500gp.

    The maximum speed I was able to get between an HP 802.11g wifi laptop and a desktop (100 Mbit network / cable) was 9 ~ 10 Mbits/s. Both connected to Asus 500gp running openwrt RC5.

    Laptop ====Wifi==== Asus 500gp === wired=== desktop

    $ wl -i eth2 rate shows 24 Mbits, when I start downloading it drops to 18 but I'm getting a maximum of 10 Mbit/s real speed only, changing this using the wl -i eth2 rate rate doesn't help.

    Laptop shows 54Mbits when connected. The weird thing is that before I got the Asus, I had a noname pci wireless router for 10 euros and I used to move big files between the computers at more than 2 Mbytes/s which is double the speed I'm getting now. Same config, same encryption on both.

    wl0_akm=psk
    wl0_infra=1
    wl0_ifname=eth2
    wl0_mode=ap
    wl0_gmode=6
    wl0_ssid=xxxxxxxx
    wl0_closed=1
    wl0_macmode=allow
    wl0_wpa_psk=xxxxxxxx
    wl0_wep=disabled
    wl0_wpa_gtk_rekey=3600
    wl0_radio=1
    wl0_maclist=xx:xx:xx:xx:xx:xx
    wl0_channel=6
    wl0_crypto=aes

    I have tried the speed with wl0_akm=open and I was able to get around 15 Mbits/s. Anybody can confirm the problem is on my side or in the config? Are you getting better speed over wifi? Thanks

  2. #2
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,356
    Intel Wi-Fi?

  3. #3
    Quote Originally Posted by Oleg View Post
    Intel Wi-Fi?
    No, Its HP WLAN 802.11b/g W400 (Atheros chipset)

  4. #4
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,356
    Well, have you tried changing wi-fi channel, enabling frame bursting and switching to 54g only mode?

  5. #5
    Quote Originally Posted by Oleg View Post
    Well, have you tried changing wi-fi channel, enabling frame bursting and switching to 54g only mode?
    I'm running in 54g mode only, tried different channels but not frame bursting. I'll try to find out how to do so and test.

    thanks

  6. #6
    Quote Originally Posted by samitro View Post
    I'm running in 54g mode only, tried different channels but not frame bursting. I'll try to find out how to do so and test.

    thanks
    After some tests I added the following nvram settings:
    wl0_frameburst=on
    wl0_gmode_protection=off
    With the right channel I'm hitting 2.1 Mbytes/s ~ 17Mbits/s which is fine for me.

    Thanks a lot Oleg

Similar Threads

  1. Possible to turn off WIFI in setup?
    By harrytasker in forum WL-500gP Q&A
    Replies: 2
    Last Post: 29-06-2006, 20:49
  2. Complicated WiFi setup
    By steveclv in forum WL-500g Q&A
    Replies: 1
    Last Post: 08-06-2006, 10:09

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •