Page 1 of 5 123 ... LastLast
Results 1 to 15 of 78

Thread: [USB] Webcams

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2003
    Location
    Eindhoven
    Posts
    2,407

    Post [USB] Webcams

    The idea is to create in the near future a database with reported working and non working devices



    please report here if you have a device that WORKS or does NOT WORK

    please also report if you have upgraded and the device stays working or not

    your post should look like this: (this is an actually working product I own)

    Tested@
    Model: WL-500g
    Firmware: 1.6.5.3 and backwards to 1.3.3.6 (tested)

    Device WORKING
    Brandname: Philips
    Brandtype: USB PC Camera PCVC680K (also know as Vesta Pro)
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.pc-cameras.philips.com/
    URL To product: http://www.pc-cameras.philips.com/ma...80k/Index.html
    Last edited by Omega; 15-10-2012 at 04:41. Reason: fixed

  2. #2
    Tested@
    Model: WL-500g
    Firmware: 1.6.5.3

    Device NOT WORKING
    Brandname: Logitech
    Brandtype: QuickCam® for Notebooks Pro
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.logitech.com
    URL To product: http://www.logitech.com/index.cfm?pa...9&languageid=1

    Device NOT WORKING
    Brandname: Logitech
    Brandtype: QuickCam® Express (earlier version)
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.logitech.com
    URL To product: N/A (picture) http://www.logitech.com/lang/images/0/863.gif
    URL To newer revision: http://www.logitech.com/index.cfm?pa...9&languageid=1

  3. #3
    Join Date
    Dec 2003
    Location
    Helmond, The Netherlands
    Posts
    89
    Device WORKING
    Brandname: Philips
    Brandtype: USB PC Camera PCVC690K (aka Vesta Pro scan)
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.pc-cameras.philips.com/
    URL To product: http://www.pc-cameras.philips.com/ma...90k/index.html

  4. #4
    Join Date
    Jan 2004
    Location
    Levanger, Norway
    Posts
    12
    Tested@
    Model: WL-500g
    Firmware: 1.6.5.3

    Device WORKING
    Brandname: Logitech
    Brandtype: QuickCam Pro 4000
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.logitech.com
    URL To product: http://www.logitech.com/index.cfm?pa...3&languageid=1

    The camera has been connected directly to the router and by a Goodway USB HUB. Both working.

  5. #5
    Join Date
    Dec 2003
    Location
    Helmond, The Netherlands
    Posts
    89
    Device WORKING
    Brandname: Philips
    Brandtype: USB PC Camera Philips PCVC750K aka Webcam Pro 3D
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.pc-cameras.philips.com/
    URL To product (pdf): http://www.p4c.philips.com/files/p/p...00_pss_eng.pdf
    Last edited by bramfm; 13-01-2004 at 20:46.

  6. #6
    Tested@
    Model: WL-500g
    Firmware: 1.7.5.6

    Device NOT WORKING
    Brandname: Creative
    Brandtype: Go Plus
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://uk.europe.creative.com/
    URL To product: http://uk.europe.creative.com/produc...rod=120&page=6

  7. #7
    Tested@
    Model: WL-500g
    Firmware: Firmware v.1.7.5.6 CR3

    Device WORKING
    Brandname: Logitech
    Brandtype: Webcam Sphere
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.logitech.com/
    URL To product: http://www.logitech.com/index.cfm/pr...CONTENTID=7172
    Last edited by copycat; 12-05-2004 at 18:14.

  8. #8

    Philips ToUcam PRO II (pcvc 840K)

    Tested@ by RJGeers
    Model: WL-500g
    Firmware: 1.7.5.6

    Device WORKING Perfectly
    Brandname: Philips
    Brandtype: ToUCam PRO II (PCVC840K)
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.philips.com
    URL To product: http://www.logitech.com, search for toucam (no detailled info)

  9. #9
    Join Date
    Feb 2005
    Location
    Northern California
    Posts
    5
    Tested@Severns House
    Model: WL-500g
    Firmware: Oleg 1.9.2.7-3c

    Device WORKING - sort of; goes to sleep sometimes, only displays color in IE 6.0.2 using port 7776, using port 7777 is black & White if working at all, and Netscape 7.2 is b&w using either port (anyone know a work-a-round for this?)??
    Brandname: Logitech
    Brandtype: QuickCam Pro 4000
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.logitech.com

    The camera has been connected directly to the router and by a JAHTUSB 2.0 HUB. Both working with exceptions noted above.

    Device WORKING - same color / B&W issues as the Logitech
    Brandname: Prochips
    Brandtype: Prochips PCC-2200K
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http:// www.prochips.com if you can read Korean

    This camera was a surprise...I bought it at a PC swap in 1996 for $30, and it was a decent camera to my surprise back then. Interestingly it works ok on with the Asus router. The router detects it as so:
    Feb 5 12:30:24 USB webcam: attached
    Feb 5 12:30:25 kernel: usb.c: registered new driver ov51x
    Feb 5 12:30:25 kernel: ov51x.c: USB OV511 video device found
    Feb 5 12:30:25 kernel: ov51x.c: model: Generic Camera (no ID)
    Feb 5 12:30:26 kernel: ov51x.c: Sensor is an OV7610
    Feb 5 12:30:26 kernel: ov51x.c: Device at usb-00:04.0-1 registered to minor 0
    Feb 5 12:30:26 kernel: ov51x.c: v1.65-1.10-mark : ov51x USB Camera Driver
    Feb 5 12:30:26 kernel: ov511_decomp.c: v1.6 : OV511 Decompression Module
    Feb 5 12:30:26 kernel: ov518_decomp.c: v1.3 : OV518 Decompression Module

    The camera has been connected directly to the router and by a JAHT USB 2.0 HUB. Both working.

  10. #10
    Tested@
    Model: WL-500g
    Firmware: 1.7.5.6

    Device WORKING!
    Brandname: Philips
    Brandtype: ToUCam Pro (740k)
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.pcstuff.philips.com

  11. #11
    Join Date
    May 2004
    Location
    Etten-Leur
    Posts
    6

    Smile Philips ToUcam FUN II (pcvc 830K)

    Tested@
    Model: WL-500g
    Firmware: 1.7.5.6

    Device WORKING
    Brandname: Philips
    Brandtype: ToUCam FUN II (PCVC830K)
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.pcstuff.philips.com

    Comment: I am facing a mirrored image but maybe that's just a camera setting that I need to change on the PC

  12. #12

    Mustek Wcam 300A

    Tested@
    Model: WL-500g Deluxe
    Firmware: 1.9.2.7-4

    Device NOT WORKING
    Brandname: Mustek
    Brandtype: Wcam 300 A
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.mustek.com
    URL To product: http://www.mustek.com.tw/html/prod_camra/WCam300a.htm

  13. #13

    Creative Webcam Nx Ultra

    Tested@
    Model: WL-500g
    Firmware: 1.9.2.7

    Device NOT WORKING
    Brandname: Creative
    Brandtype: Creative Webcam nx ultra
    USB Interface: USB 1.1 compliant

  14. #14
    Join Date
    Sep 2004
    Location
    Netherlands
    Posts
    14

    NOT WORKING Philips ToUCam PCVC720K/20

    Tested@
    Model: WL-500g v2.4
    Firmware: 1.7.5.9-5 (Oleg)

    Device NOT WORKING
    Brandname: Philips
    Brandtype: Philips ToUCam XS PCVC720K/20
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.pc-cameras.philips.com/

    (Some garbage is shown....

    admin: define garbage please? are u viewing port 7777 ?

    (see screen shot)
    No not port 7777, url with with the refresh option, on port 7777 only ascii stuff
    (Active X component not loaded because it's not signed, i'm running XP SP2)

    (2)
    Made sure all updated modules where installed, videodev.o, ov511.o, ov511_decomp.o, ov518_decomp.o.
    Enabled active x component. still the same now with some colors

    (3)
    rcamd is using 98% cpu time....
    setup

    WL500G
    |
    USB Hub-----+---------+
    | | |
    WebCam USB Disk USB Stick
    Root FS FTP Upload
    Attached Images Attached Images  
    Last edited by Zolf; 28-09-2004 at 22:58. Reason: updated with comments(3)

  15. #15
    Join Date
    Dec 2003
    Location
    Helmond, The Netherlands
    Posts
    89
    Quote Originally Posted by Zolf
    Tested@
    Model: WL-500g v2.4
    Firmware: 1.7.5.9-5 (Oleg)

    Device NOT WORKING
    Brandname: Philips
    Brandtype: Philips ToUCam XS PCVC720K/20
    USB Interface: USB 1.1 compliant
    URL To manufacturer: http://www.pc-cameras.philips.com/

    (Some garbage is shown....
    Same thing applies for the PCVC820k/00, ToUcam II (based on OV518+ chipset). Same garbage.

Page 1 of 5 123 ... LastLast

Similar Threads

  1. WebCam - SPCA50x drivers
    By lada in forum WL-500g Custom Development
    Replies: 52
    Last Post: 19-06-2009, 14:59

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •