Does this have the Bigpond Login support as in 9.8.1.2 version ??
WARNING: BETA VERSION
TRY AT YOUR OWN RISK!
DO NOT UPGRADE UNLESS YOU KNOW WHAT YOU ARE DOING
DOWNGRADE IS NOT EASILY POSSIBLE!!
Changelog:
nothing known yet
* FIXED UPnP issue when assigning port 80 for example it applied for outgoing connections as well.. e.g. you were not able to visit websites anymore
+ ADDED Logout in webconfig
* some cleanup of webconfig
Note from ASUS:
Find file for download here: http://files.wl500g.info/asus/wl500g...1.8.1.3_en.zipAfter you upgrade to this beta version of firmware and please do "Hardware reset" from the back of WL-500g.
(sorry post disappeared after database error)
Last edited by Antiloop; 14-07-2004 at 22:39.
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO
Does this have the Bigpond Login support as in 9.8.1.2 version ??
yes i has all previous things in itOriginally Posted by ReBooT
i'm not aware if they have anything changed in it
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO
Uploaded this early today.
The pond came up and all is good.
Its looking in funny places (255.255.255.255) for sm-server but it just keeps logging on. It works. what more do i need? Apart from olegs nice logs and telnet and other nice things i don't know how to use.
All Good
Matthew
I upload the 1.8.1.3 to my WL-500G , after restart the firmware is till 1.8.1.1 ,why ?
Reflash again.
I already reflash 3 times. still 1.8.1.1.........
Did you have 1.8.1.1 before you were upgrading to 1.8.1.3? I assume you have..
Try the firmawe restauration method to flash it back to 1.7.5.6 and than up to 1.8.1.3..
With the 1.8.1.1 firmware you couldn't flash back to a lower version using the webinterface, so I think it the firmware upgrade through webinterface doesn't function at all on 1.8.1.1 firmware..
After upgrading to 1.8.1.3 (from 1.7.5.2), the WL500g asks me for login/password combination but the admin/admin doesn't work.
So, I cannot connect to the web interface and moreover the asus utility firmware restoration doesn't works because this utility doesn't find "ASUS SpaceLink Gateway in recovery mode" !
Please, help me, what is the couple login/password for the 1.8.1.3 or what is the solution to flash another firmware ??
Thank you very much for your answers.
user: empty (do not fill in anything)
pass: admin
Should do the trick..
And for the firmware restoration; I had the same problem when flashing back to 1.7.5.6..
I saw it was working when my computer had an APIPA ip.. So make sure your computer has one (not 0.0.0.0; just try to repair and you'll get an APIPA after a couple of times).. when I got an APIPA ip, I could restore the old firmware..
when restoring you should set IP to static as 192.168.1.2 mask 255.255.255.0Originally Posted by Krypt
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO
me too....I have the same problem with you...Originally Posted by Gary
I even use firmware restoration to downgrade to 1.7.5.6...
BUT I still see 1.8.1.1 in my explorer...
and it show me " no wireless device in recovery mode is found"...
well...If I could...I would like to downgrade to 1.7.5.6...
anyone can help me?
Last edited by emilyaoo; 15-07-2004 at 23:13.
do the followingOriginally Posted by emilyaoo
assing a static IP to your pc: 192.168.1.2 with netmask 255.255.255.0
power off wl500g
press restore button HOLD THIS while powering on
wait untill the power led is blinking, release the restore button
fire up your restoration tool
NOW it should find your router, then upgrade to fw 1.8.1.3
after finished you router should be accessible again
if it's accessible RESTORE DEFAULTS by pressing the restore button while it's powered on, you'll notice after a few seconds that the power led will go out and on
congrats your router has been restored
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO
Thanks for your help...Originally Posted by Antiloop
I finally downgrade to 1.7.5.6...^^..
Strange.. I was certain that I had a APIPA address before I could restore the old firmware.. But heck; maybe my computer just had a valid ip just before flashing.. didn't check during flash which ip I had..